|
| 1 | Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 2 | Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 3 | Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same, complete all as specified and directed. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land, complete all as specified and directed. |
| 5 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 6 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land, complete all as specified and directed. |
| 7 | M & L for Old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-30mm thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including two coats of OBD / Weathercoat, complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and labour for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed by Engr-in-Charge. |
| 9 | Material and labour for 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth, complete all as specified and directed by Engr-in-Charge. |
| 10 | Material and Labour for applying one coat of wall putty 1mm Average thickness on wall surface including rubbing through authorised applicators, complete all as specified and directed. |
| 11 | Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. |
| 12 | Material and Labour for complete removal of existing treatment of old surface of wall and applying two coats of oil emulsion distemper through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. |
| 13 | Material and Labour for preparing newly plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 14 | Material and Labour for complete removal of existing treatment of old plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings, complete all as specified and directed. |
| 15 | Tanking down old cupboard shutter or vanity shutter including all fitting, complete all as specified and directed. |
| 16 | S&F of 18 mm thick both Side pre laminated HDHMR Board of any colour, matt surface finish, grade 1 as per IS 14587, for frame and shutter with 18 mm wide PVC strrips lipping for kitchen cabinets, complete all as specified and directed by Engr-in-charge. |
| 17 | S&F of round stainless steel cabinet/drawers handlers dia of 27mm, complete all as specified and directed. |
| 18 | S&F of medium weight, cold rolled mildsteel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing, complete all as specified and directed by Engr-in-charge. |
| 19 | Taking down shutters of any description n. exc 1 sqm each, complete all as specified and directed. |
| 20 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 21 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
