|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and Laying Stone soling Nallah Hand Packed in Bed incl.all carriage complete job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1cement : 6 coarse sand) |
| 7 | Extra for brick work with common burnt clay bricks in superstructure above plinth level upto floor five level. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level ;Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Columns, pillars, piers, abutments, posts and struts. |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 15 | Edges of slabs and breaks in floors and walls. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood. |
| 17 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge.Butt hinges and necessary screws shall be paid separately. Kiln seasoned and chemically treated hollock wood |
| 18 | Provided and fixing of Pre-laminatedpartical board with decorative lamination on both sides. |
| 19 | Providing and Fixing of wire gauze shutters using galvanized M.S wire Gauge of average width for aperture 1.4 mm in both sides directions with wire of dia 0.63 mm for doors,windows and clerestory window with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per directions of Engineers in charge imported wood 30mm thick. |
| 20 | 12 mm thick cement plaster in 1:6 (1 cement : 6 coarse sand) mix. |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, 2 mm thick. |
| 22 | Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 24 | Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade, new work (two or more coats) @ 3.84 kg/10 sqm. |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20 mm nominal size stone aggregate. |
| 26 | Providing and fixing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with nails/ nut & bolts. |
| 27 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer-in-charge, complete as per the specifications (Anodized Aluminium fittings).Tower bolts 100mm. |
| 28 | Handle 125mm. |
| 29 | Tower bolt 150mm. |
| 30 | L-drop lock type. |
| 31 | Handle 150mm |
| 32 | 150mm Hook and Eyes. |
| 33 | Providing and fixing of 3.5 mm thick float glass panes including beading and necessary nails complete. |
| 34 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.15mm Dia Pipe. |
| 37 | 20mm Dia Pipe. |
| 38 | 25mm Dia Pipe. |
| 39 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. Internal work.PN-16 Pipe , 25mm OD(SDR-7.4) |
| 40 | PN-16 Pipe , 32mm OD(SDR-7.4) |
| 41 | PN-16 Pipe , 40mm OD(SDR-7.4) |
| 42 | Providing and fixing P.V.C. pipe and pipe fittings type B of the following nominal dia to P.V.C. soil/waste/ventilating pipes complete.PVC Pipe 100mm. |
| 43 | PVC Pipe 75mm. |
| 44 | PVC Collar 100mm |
| 45 | PVC Collar 75mm |
| 46 | Door tee 75mm |
| 47 | PVC Reducer 100x75mm |
| 48 | Door bend 100mm |
| 49 | Door bend 75mm |
| 50 | Cowel & clif |
| 51 | Floor trap 100mm |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS: 8931 (Jaquar make). |
| 53 | Providing & fixing C.P. wall mixer of approved make including cutting and making good the walls wherever required (Jaquar make). |
| 54 | Providing and fixing angle valve for all points of standard quality and make including all accessories complete job (Jaquar make). |
| 55 | Providing & fixing C.P. tubes of approved make 450 mm to 600 mm long. |
| 56 | Providing and fixing of soap case of standard quality and make. |
| 57 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, rectangular shape 453 x 357 mm. |
| 58 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.(600mm long towel rail with total length of 645mm,78mm wide and effective height of 88mm weighting not less than 190grms) |
| 59 | Providing and fixing of cockroach type CP grating of standard quality and make 100 mm. |
| 60 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make,incl.painting of fitting and brackets,cutting and making good the walls wherever required.White Vitreous china basin size 550x400 mm with a 15mm CP Brass single hole basin mixer. |
| 61 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I brackets and stainless steel plug 40mm incl.paintig of fitting and brackets cutting and making good the walls wherever required.Kitchen sink without drain board 610x510mm bowl depth 200mm. |
| 62 | Providing & fixing C.P. sink mixer of approved make incl.cutting and making good the walls wherever required jaquar make. |
| 63 | Providing and fixing toilet paper holder C.P. brass. |
| 64 | Providing and fixing health faucet with flexible tube up to 1 m long. |
| 65 | Providing and fixing on wall 50 Ltrs electric geyser of make jaquar,Havels,venus or Equivalent as per directions of E.I.C with necessary fitting etc.all complete job. |
| 66 | Providing & fixing ball valve of approved quality 25 mm dia. |
| 67 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete job, size--600x600mm. |
| 68 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete . |
| 69 | Providing and Placing on terrace(at all floor levels) polyethylene water storage tanks ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank. |
| 70 | Construction brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand)mix ,foundation cement concrete 1:4:8 mix (1 cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with in side cement mortar 1:3 (1 cement: 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand 4graded stone aggregate 20 mm nominal size) etc.all complete job of size(600x600x450mm) incl.manhole cover of approved brand. |
| 71 | Supplying and filling of RBM under floors incl.Spreading,watering,dressing,consolidation incl.cost and carriage etc.complete and for levelling surface. |
| 72 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require.a) White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 73 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 74 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 75 | Providing/Fixing High rib colour coated sheets 0.50mm roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers ,complete(upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.incl.all costs and carriage upto site of work. 0.50mm thick. |
| 76 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2. |
| 77 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.Nallah. |
| 78 | Providing and fixing Plained Eaves Boarding. |
| 79 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade.(Area of slab over 0.5 sqm).16mm. |
| 80 | Providing and fixing of Signboard of required size and shade as per the directions of Engineer-in-charge. All complete job. |
| 81 | Providing and laying chisel dressed Devri Stone of different sizes for hamam in cement mortar 1:6(1 cement :6 sand) upto plinth level incl.curing,fixing of required no. of exhaust/smoke pipes and surkhi plaster inside and all costs and carriage upto site of work complete job.One face dressed fine chisel dressed. |
| 82 | Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railingwith necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 83 | Carriage of materials By Mech.Transport, from source to site of work incl. Loading, unloading and stacking at site complete. Steel Avg.lead of 100km. |
| 84 | Sand for an avg lead of 15 km . |
| 85 | Stone aggregates 20mm nominal size for an avg lead of 130 km. |
| 86 | Stone aggregates 40mm nominal size for an avg lead of 130 km. |
| 87 | Cement for an avg lead of 15 km. |
| 88 | Bricks for an avg lead of 180 km. |
| 89 | Stones for an avg lead of 15 km. |
| 90 | C.G.I SHED FOR FIREWOOD AND STORAGE OF TOOLS, TACKLES AND SPARE PARTSEarth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil . |
| 91 | Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriages and lifts upto the site of work complete job. |
| 92 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 93 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) . |
| 94 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 95 | Centring and shuttering including strutting, propping etc and removal of form work:-Foundations, footings, bases of columns etc. |
| 96 | Columns, pillars, piers, abutments, posts and struts. |
| 97 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 98 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 99 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded. |
| 100 | Providing & Fixing High - Rib Profile coloured sheets 0.50mm roofing including vertical/curvedsurface fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead,including a coat of approved steel primer and two coats f approved paint on overlapping of sheets complete(upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required 0.50mm thick with zinc coating not less than 275gram/m |
| 101 | Providing ridges or hips of width 60cm overall width coloured sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick |
| 102 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover |
| 103 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 104 | Carriage of materials By Mech.Transport, from source to site of work incl. Loading, unloading and stacking at site complete. Steel for an avg lead of 100 km. |
| 105 | Cement for an avg lead of 15 km. |
| 106 | Sand for an avg lead of 15 km. |
| 107 | Stone aggregates for an avg lead of 130 km. |
| 108 | CONSTRUCTION OF C.G.I SHED OF 20 X 15 Feet FOR STORAGE OF 2 NO. TANKS FOR HSD/POLEarth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil . |
| 109 | Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compacting Including all carriages and lifts upto the site of work complete job. |
| 110 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 111 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 112 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 113 | Centring and shuttering including strutting, propping etc and removal of form work:- Foundations, footings, bases of columns etc. |
| 114 | Columns, pillars, piers, abutments, posts and struts. |
| 115 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 116 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 117 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded. |
| 118 | Providing & Fixing High - Rib Profile coloured sheets 0.50mm roofing including vertical/curvedsurface fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead,including a coat of approved steel primer and two coats f approved paint on overlapping of sheets complete(upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required 0.50mm thick with zinc coating not less than 275gram/m |
| 119 | Providing ridges or hips of width 60cm overall width coloured sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick |
| 120 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover |
| 121 | Structural steel work in for built up work for fabricating MS storage tanks for storage of fuel, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 122 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 123 | Carriage of materials By Mech.Transport, from source to site of work incl. Loading, unloading and stacking at site complete. Steel for an avg lead of 100 km |
| 124 | Cement for an avg lead of 15 km |
| 125 | Sand for an avg lead of 15 km |
| 126 | Stone aggregates for an avg lead of 130 km |
| 127 | CGI Shed of 12'X 8' Feet for housing of DG Set of Capacity 25KVAEarth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil . |
| 128 | Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compacting Including all carriages and lifts upto the site of work complete job |
| 129 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 130 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 131 | Centring and shuttering including strutting, propping etc and removal of form work:- Foundations, footings, bases of columns etc. |
| 132 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 133 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 134 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded |
| 135 | Providing & Fixing High - Rib Profile coloured sheets 0.50mm roofing including vertical/curvedsurface fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead,including a coat of approved steel primer and two coats f approved paint on overlapping of sheets complete(upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick with zinc coating not less than 275gram/m |
| 136 | Providing ridges or hips of width 60cm overall width coloured sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick |
| 137 | Carriage of materials By Mech.Transport, from source to site of work incl. Loading, unloading and stacking at site complete. Steel for an avg lead of 100 km |
| 138 | Cement for an avg lead of 15 km |
| 139 | Sand for an avg lead of 15 km |
| 140 | Stone aggregates for an avg lead of 130 km |
| 141 | CONSTRUCTION OF BREAST / RETAINING WALLS INCL. LEVELLING OF GROUND & FENCINGEarth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 142 | Disposal of surplus earth by mechanical transport for avg. 1 Kms beyond initial lead of 50m including loading and unloading complete. |
| 143 | Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compacting Including all carriages and lifts upto the site of work complete job |
| 144 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40 mm nominal size (Nallah aggregate complete job.) |
| 145 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate Nallah Aggregate including Carriage Complete Job.) |
| 146 | Centring and shuttering including strutting, propping etc and removal of form work:- Foundations, footings, bases of columns etc. |
| 147 | Providing and fixing 75 mm dia PVC pipe so as to act as weep holes complete job. |
| 148 | Stone filling behind B/Rwall 65 x 1.64 x 1.26. |
| 149 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 150 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 4 mm. |
| 151 | Carriage of materials By Mech.Transport, from source to site of work incl. Loading, unloading and stacking at site complete. Steel for an avg lead of 100 km |
| 152 | Cement for an avg lead of 15 km |
| 153 | Sand for an avg lead of 10 km |
| 154 | Stone aggregates for an avg lead of 15 km |
| 155 | DEVELOPMENT OF APPROACH ROAD B.W.O P/L RBM & WBM GRADE- IISupplying & Stacking RBM (River Bed Material )consisting of naturally occuring sand, moorum, gravel and stone aggregate and combination there of with max.size of particle 100 mm depending upon grading limits incl.sorting,spreading&consolidation with PRR 8- 10 Tonne capacity roller incl.all carriages complete job. |
| 156 | Providing , laying, spreading and compacting stone aggregate of specific sizes (63-45mm)to water bound macadam specifications including spreading in uniform thickness hand packing rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density, incl all carriage complete job. |
| 157 | ElectricationWiring for light point/Fan point/Exhaust fan/bell point with(P+N+E)3X1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable (Havells/Anchor/Eq. Make) in surface/recessed Conduits laid in slabs (Including Cost of Conduit 25mm) with 01 No.of 6Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified/Schneider/ Havells/Legrand/Anchor roma plus/ABB/Eq.Make & along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentioned above & items shall be approved before execution of work by SDO |
| 158 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make). |
| 159 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified/Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO. |
| 160 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make) |
| 161 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells/Legrand/ Anchor roma plus/Schneider/ABB/Eq.Make& shall be approved before execution of work. |
| 162 | Wiring for Sub main Wiring along with earth Wire with the lving Sizes of FRLS PVC insulated copper conductor, Conduit (Havells/Polveab/Eq.Make) & shall be approved Joule core Cable in surface/Recessed medium class PVC Before execution of work (Including Cost of Conduit/Channel).2x10 sq.mm+ 1x10 sq.mm (P+N+E) for Power point Sub Supply/Fixing/Testing and Commissioning of 6Amp to main in One run from Main Panel to Distribution Boards |
| 163 | 2x2.5 sq.mm+ 1x2.5 sq mm(P+N+E) for inverter circuit. |
| 164 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240V,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB. DB Complete with connections.(L&T/Siemens/Legrand/Havells/ABB/Eq. Make) |
| 165 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq Make) 63 Amp. |
| 166 | 40 Amp. |
| 167 | 100 Amp. For main supply |
| 168 | 32 Amp. |
| 169 | Supplying and Fixing of MCB 6 way(4+18), horizontal typed, sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/Schneider/ABB/Eq Make) |
| 170 | Supply/Installation/Testing and Commissioning of 18W LED Conceal (Commercial Type) light luminary fitting, round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70. The Input voltage shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacements of fixtures of Philips/Havells/Wipro/Jaquar/Eq.make |
| 171 | Supply/Installation/Testing and Commissioning of 12W LED Conceal (Commercial Type) light luminary fitting, round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70. The Input voltage shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacements of fixtures of Philips/Havells/Wipro/Jaquar/Eq.make |
| 172 | Providing and Fixing of IK08 IP-66 protected high power LED 50 Watt flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of power LED of 3 to 5 watt each. Integrated driver having BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The system level luminaire efficacy >125 lm/W. LED driver input AC 120 to 270 V AC, with High voltage Cutoff (>300 V AC and Auto resetting Safety Feature 105%). THD <10% , driver current <750mA. driver should have Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external inside driver compartment, System life of 50000 Burning hours with 70% of Initial lumens maintained, CRI>70 and CCT 5700K. Manufacturers Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to avoid traceability/authenticity. Fixture shall be IS 10322 Compliance,OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure ‘A’ attached with this BSR-High Power LED Flood Light Minimum lumen output @200 lm of as approved to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /Handing over of site to intending department. Havells/Philips/Wipro/Halonix/Eq.make |
| 173 | Supply/Laying/Connecting and Commissioning of 35 sq.mm 2-Core XLPE/PVC insulated and un-armoured 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles duly crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench . (Material to be approved before execution) |
| 174 | Supply/Installation/Testing and Commissioning of 225-250mm Shutter Typed, 320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust Fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB of Following Sizes including connection etc USHA/Havells/Crompton/Eq. Make.(Min I-Star) |
| 175 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve earth pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filling Crystalline conductive mixture with Eco friendly GEM Backfill Compound 2No. bags also having Earth pit chamber (300mm x 300mm) with man-hole cover for the above. Including cost of 20MM dia copper strip as required in one run fitted with brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job. |
| 176 | Supply Installation testing and comm.of Inverter battery 180 AH/12 V Exide invatubular/eq.standard make as directed by Engineer in charge. |
| 177 | Supply installation testing and commissioning of Sine wave inverter capacity 2 K VA Rated Power 1650 W , supports three battery , 24 month Warranty safe for sensitive appliances with sine wave out-put inverter should run heavy loads like AC , photocopiers , auto over-load handling capacity Installation and maintenance friendly Offers high quality and reliable power back-up solution for office and homes , MCB for protection from input mains , bypass switch for supplying output directly from grid in case of home UPS fault . Noiseless Operations with the help of low harmonic distortion, initiative display to easily understand status of mains availability, battery status etc.Comprehensive protection against short-circuit , reverse polarity, battery charging and enhances battery life by around 70%. Supports a wide battery range , i.e. flat plate , Tubular & VRLA (SMF)- preffered make luminous /Microtech/Exide. The job also includes 1no. trollies for housing 2 NO. batteries and inverter. Please Enable Macros to View BoQ information |
