|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. Note:- Height of the buildings upto eight storey, including use of scafolding. |
| 2 | Material and labour for 12mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth, complete all as specified and directed. |
| 3 | M&L for wall surface and applying 1.50mm thick (average) wall care putty including rubbing with sand paper and making the wall surface smooth and applying two coats of oil bound distemper over a coat of primer to the satisfaction of Engineer-in-Charge, complete all as specified and directed. |
| 4 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed. |
| 5 | Material and Labour for Vitrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc and jointed in neat cement slurry and pointed in whitebor coloured cement (and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 6 | Material and Labour for Vitrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm in vertical surfaces etc and jointed in neat cement slurry and pointed in whitebor coloured cement over and including 10 mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed. |
| 7 | Material and Labour for first and premium quality of non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile excedding 0.06 sqm but n.exc 0.11 sqm in floors etc set and joimted in neat cement sluury and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 8 | Material and Labour and fixed in repair for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B-0 / Cement mortar 1:3, complete all as specified and directed with following:-(a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm.(b) Supply and fixing 0.9 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners.(c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level.(d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE. |
| 9 | M&L 18 mm plywood with wooden fillets framing of size on wll alongwith Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction, complete all as specified and directed. |
| 10 | Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed. |
| 11 | Supply & fixing in repair vitreous china white wash basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as Specified and directed. |
| 12 | S&F Waste pipe for sink /WHB incl fixing aarngement, complete all as specified and directed. |
| 13 | S&F in repair PVC 10 litres capacity, low level, syphonic type, white, plastic twin flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe, complete all as specified and directed. |
| 14 | S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 15 | S&F in repair for 15 mm bore fancy type wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 16 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 17 | S&F in repair CP soap dish, complete all as specified and as directed by Engr-in-Charge. |
| 18 | S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed to walls using, complete all as specified and directed. |
| 19 | Supply and fixed 15 mm bore overhead shower Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 20 | S&F in repair 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts, complete all as specified and directed. |
| 21 | S&F in repair 5.50 mm thick of size 600x450 mm bevelled edge mirror of selected quality glass and fixed to walls usinghidden studs, complete all as specified and directed. |
| 22 | M&L 75/110 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed. |
| 23 | Taking down door chowkhat with shutter area n.exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed. |
| 24 | Taking down door chowkhat with shutter area exc 1.50 Sqm n.exe 4.00 sqm each (without taking off shutters from the frame), complete all as specified and directed. Please Enable Macros to View BoQ information |
| 25 | Taking down door chowkhat with shutter area exc 1.50 Sqm n.exe 4.00 sqm each (without taking off shutters from the frame), complete all as specified and directed. Please Enable Macros to View BoQ information |
