|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 3 | Taking down chowkats or frame of any description exc 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 4 | Taking down chowkats or frame of any description (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc. 4.0 Sqm each complete all as specified and directed. |
| 5 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | All as per Srl item No. 05.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 7 | M&L for Vitrified Ceramic tiles 10mm thick Dark shade double charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm not tiles exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | All as per Srl item No. 07.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | All as per Srl item No. 09.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 11 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 12 | M&L for 300 x 300 x 15-16mm thick heavy duty ceramic floor parking tile laid in floor etc with 2-3mm thick spacer, joint of spacer is filled with epoxy or as directed, set in neat cement slurry and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 15 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6 complete all as specified. |
| 16 | All as per Srl item No. 15.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 17 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 18 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 19 | S&F of 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 20 | Refixing old 15mm GI tubing and connections in new or old position (Wall, Floor, Wall etc.) complete all as specifed and directed. |
| 21 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specifed and directed. |
| 22 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 23 | S & F of 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed |
| 24 | Refixing old 20mm GI tubing and connections in new or old position (Wall, Floor, Wall etc.) complete all as specifed and directed. |
| 25 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I including taking down old unsv PVC water tank complete all as specifed and directed. |
| 26 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I including taking down old unsv PVC water tank complete all as specifed and directed. |
| 27 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specifed and directed. |
| 28 | S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed and directed. |
| 29 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 30 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specifed and directed. |
| 31 | S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 32 | S & F in repairs Toilet Paper Holder Stainless Steel fixed to wall complete all as specified and directed. |
| 33 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 34 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 35 | M&L for preparation of new surfaces pf plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and directed. |
| 36 | M&L for Rendering 10mm thick on fair faces of concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and surface without using extra cement complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and directed. |
| 38 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 39 | M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces complete all as specified and directed. |
| 40 | M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper including necessary putty (any tint) on walls complete all as specified and directed. |
| 41 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 42 | M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 43 | M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 44 | M&L for preparation of old surfaces pf plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and directed. |
| 45 | M&L for preparing old painted plastered surfaces and applying one coat of cement based paint on wall complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) complete all as specified and directed. |
| 46 | M&L for preparing old painted plastered surfaces and applying two coat of cement based paint on wall complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) complete all as specified and directed. |
| 47 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed. |
| 48 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc complete all as specified and directed. |
| 49 | S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. |
| 50 | Dismantling of Plain or corrugated steel/ AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 51 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 52 | Dismantling old timber scantling over 40 sqm complete all as specified and directed. |
| 53 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 54 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 55 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc complete all as specified and directed. |
| 56 | S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces.(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter - 01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 57 | S&F glazed (5.0mm thick plain/ coloured glass) aluminum door powder coated consisting of frame of 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size is 110 x 44mm & style of door shutter is 83mm x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangemen, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc complete (Al. section thickness 2mm) confirming to IS. |
| 58 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed. |
| 59 | M&L for complete removal of existing surface and preparation of old surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface over and incl two coat of wall putty complete all as specified and directed. |
| 60 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items including taking down old water proofing treatment such as for felt/ concrete tile etc. & removing rubbesh to a distence not exc 10 mtr, complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc.(v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. |
| 61 | M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed. |
| 62 | M&L for complete removal of existing treatment from wall by scrapping of (exterior) surfaces of old decorated walls etc, and applying Birla/ J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 63 | M&L for complete removal of existing treatment from wall by scrapping & washing etc. and applying Birla/ J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 64 | M&L for Chequered cement concrete tiles 300cm x 300cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in floor including taking down old unsv tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
