|
| 1 | Cutting in earth work and disposal of excavated earth up to a lead of 20 Mtrs in pick work, Jumper work and Blasting work in all leads and lifts. |
| 2 | Excavation in foundations trenches etc. (for pipes and pits ) upto all depths in all kinds of soil such as pick work,jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of its original conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects. |
| 3 | Providing and laying cement concrete 1:3:6(1cement:3 sand:6 crushed stone agg.40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts. |
| 4 | Providing and laying cement concrete 1:1.5:3(1cement: 1.5 sand:3 crushed stone agg.20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 5 | In foundation and plinth in all leads and lifts. |
| 6 | Walls (any thickness)but not less than 0.1 mtr.thickness)attached pillasters,buttresses,plinth and string courses etc.from top of foundation level upto floor two level in all leads and lifts. |
| 7 | Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts. |
| 8 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- |
| 9 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts |
| 10 | Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc.upto 200mm in thickness in all leads and lifts. |
| 11 | Edges of slab and breaks in floors and walls under 20 cm wide in all leads and lifts. |
| 12 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level including cost of binding wires and carriage of materials upto in all leads and lifts. |
| 13 | Providing and Fixing of 3.15mm MS sheet Manhole cover 600X600 mm with locking arrangement in all leads and lifts. |
| 14 | Providing and fixing Gun Metal Wheel valve (with hand wheel) as per specification of the Engineer-In-Charge in all leads and lifts |
| 15 | 50mm dia. |
| 16 | 32mm dia. |
| 17 | Fixing of GI pipe 50 mmdia for inlet,outlet and scour pipe in all leads and lifts. Please Enable Macros to View BoQ information |
