|
| 1 | SH-I: EI WorkWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. a) Group C |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as requireda) Group C |
| 3 | Rewiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 4 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.a) 3 x 1.5 sq. mm |
| 5 | b) 6 x 1.5 sq. mm |
| 6 | c) 3 x 4 sq. mm |
| 7 | d) 6 x 4 sq. mm |
| 8 | Providing and fixing of PVC Trunking of following sizes complete with flexible cover, joint, endcap, cover , partition clip wherever reqd. on surface of wall/existing mounting etc. as required. a) 32 mm x 20 mm |
| 9 | b) 105 mm x 50 mm |
| 10 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm |
| 11 | b) 25 mm |
| 12 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 13 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 14 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 15 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.a) 5/6 amps switch |
| 16 | b) 2 way 5/6 A switch |
| 17 | c) 15/16 A switch |
| 18 | d) 3 pin 5/6 A socket outlet |
| 19 | e) 6 pin 15/16 A socket outlet |
| 20 | f) TV antenna socket outlet |
| 21 | g) Bell push |
| 22 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. a) 1 or 2 Module (75mmX75mm) |
| 23 | b) 3 Module (100mmX75mm) |
| 24 | c) 4 Module (125mmX75mm) |
| 25 | d) 6 Module (200mmX75mm) |
| 26 | e) 8 Module (125mmX125mm) |
| 27 | f) 12 Module (200mmX150mm) |
| 28 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.(40 nos for AC and 20 Nos for Geyser) |
| 29 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)a) 4 way (4 + 12), Double door (AC and Power DB) |
| 30 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single pole |
| 31 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.a) 100 Amp TP MCB \\"C-Curve\\" 10 kA breaking capacity (For 4 Vertical DB) |
| 32 | Supplying, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor armoured power cable of 1.1 kV grade of following size on wall surface /Cable Tray as required. (a) 4 X 16 sq. mm Alu. Cable.(Flood Light and Post TOP Lamp) |
| 33 | (b) 4 X 25 sq. mm Alu. Cable.(From AC/Power Panel to AC/ Power DB) |
| 34 | (c) 3.5 X 70 sq. mm Alu. Cable. (For Main Panel to AC Panel) |
| 35 | (d) 3.5 X 185 sq. mm Alu. Cable. (Meter to Main Panel) |
| 36 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade of following size direct in existing GI /HDPE pipe / PVC channel / trench / cable tray complete with making connection etc as required. (a) 4 X 16 sq. mm Alu. Cable. |
| 37 | (b) 3.5 X 70 sq. mm Alu. Cable. |
| 38 | c) 3.5 X 185 sq. mm Alu. Cable. |
| 39 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 4 X 16 sq. mm (28mm) |
| 40 | b) 4 X 25 sq. mm (28mm) |
| 41 | c) 3½ X 70 sq. mm (38mm) |
| 42 | d) 3½ X 185 sq. mm (57mm) |
| 43 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a) 63 mm dia (OD-63 mm & ID-51 mm nominal) (For 3.5*70 and 4*16 Sqmm Cable) |
| 44 | a) 90 mm dia (OD-90 mm & ID-76 mm nominal) (For 3.5*185 Sqmm Cable) |
| 45 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (3- Indoor Panel, 1- Pump Panel) |
| 46 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. (For Main Panel) |
| 47 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 48 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 49 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 50 | Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) a) 36 watt |
| 51 | SITC of surface mounted type Luminare Glass free opal Diffuser LED Panel of 15 W Nominal Size 1*1 ft suitable on surface including connection, testing (including dismantling) etc complete as required. |
| 52 | SITC of New generation, IP 65 LED, 25 watt post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications etc. as required at site |
| 53 | Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim a) 18 watt |
| 54 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 \ sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) a) 36 watt |
| 55 | Supplying, installation, Testing & Commissioning of 600 mm LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). The existing fitting must be dismantled if any. a) 10 Watt Powder coated die cast / Extruded aluminium Body (Thickness≥ 1.20 mm) |
| 56 | Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required a) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 57 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 58 | Supply, installation, Testing and Commissioning of 600 mm,1440 RPM, 200 Watt Air Circulator Wall Mounting Fan complete with motor, blades, protective guard, mounting bracket and all necessary hardware, suitable for industrial/commercial cooling and ventilation applications. |
| 59 | Supplying & fixing of 300-305 mm sweep 1300 RPM 230 Volt 1-ph 50 Hz AC heavy duty Exhaust fan in the existing opening including making good the damage, connection, testing and commissioning etc. as reqd. |
| 60 | Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). a) 150 watt |
| 61 | Supplying & fixing Hot press moulded SMC box of size 250 x 200 x 105 mm i/c S/F Aluminium Bus Bar of suitable size i/c Phase, Neutral and Earth link, including 1 no. 6A to 32A rating 240 V 10KA \\"C\\" curve SP MCB & 1 no. earth bar, 1 no. Neutral bar, DIN rail mounting with openable hinged door on street light pole as required complete with mounting bracket/arrangement made of 5 mm thick GI flat iron etc. pole/wall i/c dismantling of existing complete etc as reqd. at site |
| 62 | Supply, Installation, Testing and Commissioning of 1000 VA Line Interactive / Online UPS system suitable for operating desktop computers, complete with inbuilt/ external maintenance free SMF batteries, automatic voltage regulation, overload protection, short circuit protection, audible alarm, LED/LCD display indicators, input/output cabling, earthing connection, and all necessary accessories as required for proper functioning. The UPS shall have a minimum backup time of 15-25 minutes for one computer load and shall be suitable for 230V, 50 Hz AC supply. The complete system shall be installed, tested and commissioned as per site requirements and direction of Engineer-in-Charge. |
| 63 | Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X DMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required. a) 55 inch or larger |
| 64 | Supply, installation, testing and commissioning of double door frost-free refrigerator of approximately 250 litre capacity, conforming to minimum 3-star energy rating, operating on 230V, 50Hz single phase AC supply, with inverter-compatible compressor, toughened glass shelves, separate freezer compartment, door lock, LED internal lighting, adjustable thermostat control, and low noise operation. The refrigerator shall be of reputed make mentioned in NIT, complete with all standard accessories, including 1-year comprehensive warranty and 10-year warranty on compressor, as required. |
| 65 | Supply, Installation, Testing and Commissioning of SS body Water Cooler with 80 Litre water storage capacity and 60 Litre per hour Cooling capacity; suitable for operation on 230 V AC ,50 HZ, 1 phase having Refrigerant R-134A, reciprocating type compressor with condensing tube of Grooved Copper. The storage tank material should be SS 202, The product have faucet material of Brass (chrome plated) with water inlet & outlet hose pipes as required. The Company is having their NABL Accredited Lab Testing facilities in Delhi. The Product is ISO 9001 and Indian Medical Association Certified , GC (Green Company) Mark and BIS certificate, ISO9001 etc. as required. |
| 66 | SITC of Reverse Osmosis(RO) System of 50 LPH along with Pre Filter Bowl set of 20” designed for Treatment of saline water in the TDS range of 500-2000 ppm having 7-stage purification having Particulate Filter Membrane Life Enhancer-Sediment Filter Pre Carbon Filter- RO Membrane-Post Carbon Filter-UV Lamp. The unit has body of CRCA Powder Coated. The TDS Rejection is 90% along with 50% Purified Water Recovery etc as required. |
| 67 | SITC of water geyser having capacity 25 Litres, Thermostat Knob for Temperature Setting, Multiple safety system with BEE rating, Shock resistant & rust proof, Thermoplastic body Indicator for Power on, Heating function Child Safety Mode. |
| 68 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). a) 2.0 TR with 5 Star BEE Rating |
| 69 | Supplying & Fixing of 5 KVA capacity automatic voltage stabilizer with time delay relay and high/low voltage trip facility having voltage range of 170 V–270 V +10% with copper flexible cable connection i/c mounting of stabilizer unit with cutting of existing board frame & mounting arrangement etc. as required at site. |
| 70 | Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for AC system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : a) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 71 | b) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 72 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 73 | Providing and fixing hard drawn steel wire fabric of size 75 x 25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \\"L\\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 74 | SITC of 3 HP Monobloc Submersible Pumpset having a discharge range of (450-150) LPM ± 10 % tolerance for head range of (15 27) Metre ± 10% tolerance suitable for operation on 3 phase, 340 50Hz AC supply i/c flange cable joint, gasket, nut & bolts etc as required. |
| 75 | Supplying & fixing 3 x 6.0 sq.mm. submersible flat cable copper conductor cable of grade 1.1 KV including connection, testing etc. as reqd. |
| 76 | Supply and fixing of following ABC type fire extinguisher (ISI marked MAP 90%) complete delivery hose horn, squeeze grip release valve, locking arrangement on wall with the help of necessary clamps and duly painted in red colour etc. as reqd. a) 6 kg capacity ABC type fire extinguisher (ISI) |
| 77 | Supply and fixing of 4.5 kg. capacity CO2 type fire extinguisher (ISI) marked complete delivery hose horn, squeeze grip release valve, locking arrangement on wall with the help of necessary clamps and duly painted in red colour etc. as reqd |
| 78 | Supplying & fixing of following accessories of firefighting safety system i/c testing & commissioning etc complete as required. a) Fire Bucket 24 gauge 9 ltr. Capacity |
| 79 | Fire bucket stand without bucket for fixing 4 bucket (Angle Type) |
| 80 | Supply, installation, testing and commissioning of 3D (three dimensional) backlit IP 65, letterforms display signage of approved artwork and aspect ratio and 50mm protruded letters as per approved size of letters in 02 languages. Red Translucent Malaysian make acrylic sheet used for letter fabrication to be of minimum 2.5mm thickness and base sheet to be of 4 mm thick sun board sheet in male-female form suitable to glow LED module fixed at equidistant on maximum 2 inch spacing. ACP sheet is to be used for boxing up and properly sealed with high quality adhesive (silicon adhesive) to make ingress protection of minimum IP 65. The ACP sheet box should be properly supported with the MS Pipe structure of size note less than 25x25 mm of 1.5mm thickness. The board should be supported with the MS pipe vertical member from inside. The distance between the vertical numbers should not be more than 1000mm (minimum). The LED modules must be in conformity to prevailing BIS codes and Bulb technology SMD LED, lumens output per mtr. 1200 lm. (minimum), CRI>80, life 35000 hrs, colour temperatures 6500K. light effect - cool daylight, start up time <0.5 s, IP 68, voltage with stand 140 V - 270 V, 50/60 Hz, independent driver with minimum 3.0 kv surge protection, backside of the board Galvanized GI Sheet. |
| 81 | Supplying and fixing photo luminescent signage instruction sign board (single sided) of 1.2 mm thick aluminium sheet with bi-lingual instructions/lettering as approved by engineer-in-charge in desired colour printed with non-toxic non-radioactive maintenance free self-glowing zinc sulphide chargeable crystals which glow in the dark printed on U-1000 photoluminescent base chemical cover with UV stabilized coating, sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length as desired by engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws, complete upto any pitch in horizontal/vertical or curved surfaces and including cutting to size and shape wherever required for wall mounting as per site conditions as required. |
| 82 | Supplying, Installation, Testing & Commissioning of Energy saving & environment friendly Laser Etched pendent type LED exit signage board bi-lingual super bright red/green LED's with Sign like hydrant, lift etc. Made of MS housing Powder Coated having acrylic sheet etched with super bright LED, power consumption less than < 2 watt, battery 7.4 volt lithium Ion 2200 mah with back up of 8 hours recharge period of 12 hours operating voltage of 190 to 230V etc. complete required. a) Single Side (Size of one Signage 14*6.4 inch, Total-5 Nos) |
| 83 | b) Double Side (Size of one Signage 14*6.4 inch, Total-5 Nos) |
| 84 | Supply, Installation, Testing and Commissioning of electronic insect flasher (insect killer) suitable for indoor use, comprising UV-A lamps for attraction of flying insects, high-voltage grid for instant elimination, complete with removable collection tray, protective outer housing made of corrosion-resistant material, and safety mesh to prevent accidental contact. The unit shall be wall/ceiling mountable, energy efficient, noiseless in operation, and suitable for operation on 230V, 50Hz AC supply. The equipment shall conform to relevant safety standards and be provided with all necessary accessories, wiring, fixing arrangements, and earthing, complete as required. |
| 85 | Fabrication, supplying, installation, testing & Commissioning of cubical type panel With IP 65 Rating, upto 300 mm depth made out of 2mm thick (14 SWG) CRCA MS Sheet having detachable gland Plates, floor mounted, compartmentalized, front operation, dust & vermin proof duly powder coated with proper locking arrangement complete with 400 Amp. TPN high conductivity aluminium alloy bus bar with DMC/SMC supports, continuous earth bar, interconnections, connections and providing & fixing of angle iron stand made out of 50mm X 50mm X 6mm thick M.S. Angle iron to suit the size of feeder pillar with 4 nos. 50 cms. legs grouted in cement concrete duly painted with one coat of red oxide & two coats of superior quality enamel paint etc. as reqd at site. (To be fabricated from CPRI approved fabricator.) (Note:- There are 6 Subpanels each of size 1.25 sq Mtr, 3 Nos Light subpanel and 3 Nos Power Sub Panel) |
| 86 | Replacement of following electrical accessories in the existing LT panel board i/c disconnection and dismantling the old worn out accessories from the panel, testing, commissioning etc complete as reqd. (Sub Panel)a) 200 A,36KA, FPMCCB (1 No I/C in Each Sub Panel) |
| 87 | b) 100 Amp TP MCB \\"C-Curve\\" 10 kA breaking capacity (For Vertical DB) (6 Nos in Each Sub Panel) |
| 88 | c) LED indicating light |
| 89 | d) Digital Voltmeter of Size 96x96mm |
| 90 | e) Digital Ammeter of Size 96x96mm |
| 91 | Fabrication, supplying, installation, testing & Commissioning of Feeder Pillar cubical type panel With IP 65 Rating, upto 300 mm depth made out of 2mm thick (14 SWG) CRCA MS Sheet having detachable gland Plates, floor mounted, compartmentalized, front operation, dust & vermin proof duly powder coated with proper locking arrangement complete with 400 Amp. TPN high conductivity aluminum alloy bus barwith DMC/SMC supports, continuous earth bar, interconnections, connections and providing & fixing of angle iron stand made out of 50mm X 50mm X 6mm thick M.S. Angle iron to suit the size of feeder pillar with 4 nos. 50 cms. legs grouted in cement concrete duly painted with one coat of red oxide & two coats of superior quality enamel paint etc. as reqd at site. (To be fabricated from CPRI approved fabricator.) (Note:- For MonoSubmerssible Motor) |
| 92 | Replacement of following electrical accessories in the existing Feeder Pillar panel board i/c disconnection and dismantling the old worn out accessories from the panel, testing, commissioning etc complete as reqd. Monosubmerssible Motor Panel)a) 100 A,30KA,FPMCCB |
| 93 | b) Starter Control panel for 3 phase motor upto 10 HP having DOL starter of relay range 9 to 14 Amp. comprising of contactor, relay, single phase preventor, auto-manual On/Off voltage selector switch, voltmeter, ammeter, push buttons etc. as reqd. |
| 94 | c) 63 A, 10 KA , TPN MCB (C-Curve) |
| 95 | d) LED indicating light |
| 96 | e) Digital Voltmeter of Size 96x96mm |
| 97 | f) Digital Ammeter of Size 96x96mm |
| 98 | Fabrication, supplying, installation, testing & Commissioning of cubical type panel With IP 65 Rating, upto 300 mm depth made out of 2mm thick (14 SWG) CRCA MS Sheet having detachable gland Plates, floor mounted, compartmentalized, front operation, dust & vermin proof duly powder coated with proper locking arrangement complete with 900 Amp. TPN high conductivity aluminium alloy bus bar with DMC/SMC supports, continuous earth bar, interconnections, connections and providing & fixing of angle iron stand made out of 50mm X 50mm X 6mm thick M.S. Angle iron to suit the size of feeder pillar with 4 nos. 50 cms. legs grouted in cement concrete duly painted with one coat of red oxide & two coats of superior quality enamel paint and fixing following rating and breaking capacity MCCB including drilling holes in cubical panel, making connections, etc as required.(Main Panel) a) 600A, FP, MDO ACB WITH M.P RELEASE LSIG, 50 KA, O/L+S/C+E/F- 2 nos. b) MDO TO EDO CONVERSION- 2 nos. d) 200A FP MCCB, Ics=36 KA WITH T.M RLS FOR O/L+S/C- 3 nos e) 100A FP MCCB, Ics=25 KA WITH T.M RLS FOR O/L+S/C- 12 nos f) 63A FP MCCB, Ics=25 KA WITH T.M RLS FOR O/L+S/C- 6 nos g) EXTENDED ROTARY HANDLE - DN2- 3 nos h) EXTENDED ROTARY HANDLE - DN0- 18 nos i) 6A, SP MCB, 10 KA- 12 nos j) DIGITAL MULTI FUNCTION METER, 96MM, CL-1.0, SUITABLE RANGE, RS-485- 2 nos k) AMF SECTION- 1nos l) METERING CTs., CL.-1.0, TAPE INS., SUITABLE VA1) 1600/5A, 15 VA- 6 nos m) IND. LIGHT 220V, LED TYPE,22.5mm DIA 1.) RED- 5 nos 2.) YELLOW- 4 nos 3.) BLUE- 4 nos 4.) GREEN- 1 nos 5.) AMBER- 1nos |
| 99 | Fabrication, supplying, installation, testing & Commissioning of cubical type panel With IP 65 Rating, upto 300 mm depth made out of 2mm thick (14 SWG) CRCA MS Sheet having detachable gland Plates, floor mounted, compartmentalized, front operation, dust & vermin proof duly powder coated with proper locking arrangement complete with 600 Amp. TPN high conductivity aluminium alloy bus barwith DMC/SMC supports, continuous earth bar, interconnections, connections and providing & fixing of angle iron stand made out of 50mm X 50mm X 6mm thick M.S. Angle iron to suit the size of feeder pillar with 4 nos. 50 cms. legs grouted in cement concrete duly painted with one coat of red oxide & two coats of superior quality enamel paint and fixing following rating and breaking capacity MCCB including drilling holes in cubical panel, making connections, etc as required.(AC Panel) a) 400A FP MCCB, Ics=36 KA WITH T.M RLS FOR O/L+S/C -1 nos b) 100A FP MCCB, Ics=25 KA WITH T.M RLS FOR O/L+S/C-8 nos c) EXTENDED ROTARY HANDLE - DN3B/ DN3- 1 nos d) EXTENDED ROTARY HANDLE - DN0- 8 nos e) 6A, SP MCB, 10 KA- 3 nos f) 3P DIGITL AMMETER, 96 MM, CL-1.0, SUITABLE RANGE- 1 nos g) 3P DIGITL VOLTMETER, 96 MM, CL-1.0, SUITABLE RANGE- 1 nos h) AUTO MANUAL SELECTOR SWITCH- 1 nos i) AMMETER SELECTOR SWITCH- 1 nos j) METERING CTs., CL.-1.0, TAPE INS., SUITABLE VA1) 400/5A, 15 VA- 3 nos k) IND. LIGHT 220V, LED TYPE,22.5mm DIA 1.) RED- 1 no. 2.) YELLOW- 1 no. 3.) BLUE- 1 no. |
| 100 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.a) 400 A,50KA,FPMCCB (MCCB near Meter) |
| 101 | SH-II: Repair of LiftOne time repair/ Replacement of defective parts of (Thysun Kurup )one Lift installed (13 Passenger) TKE lift ID- 2-07-09-064 i/c Supplying of following spare parts (Labour for installation of the genuine part is also included)i) Gear Oil Mineral Parthan Ep 460 :- 8 Nos.ii) Inverter Tke-1-24.5 11Kw Ol/Cl :- 1 No.iii) Pcb Rl9 Relay Card Tic Ii:- 1 No.iv) Pcb Mpus R2 Smd Version Tic Ii:- 1 No.v) Pcb Vl Dd Scrolling Lcu Tic Ii & Iii :- 4 Nos.vi) Smps Ned100D 24Vdc3.5A 5Vdc3A Tic V :- 1 No.vii) Encoder Hes-0512-2Hc Nemicon :- 1 No.viii) Ups Sua3000I 3000Va :- 1 No.ix) Relay Mkg-2P 110Vac :- 3 Nos.x) Contactor Lc1D18F7 110Vac :- 3 Nos.xi) Contactor Lc1D25F7 110Vac :- 2 Nos.xii) Spp Uspd1 Din Rail Type :- 1 No.xiii) Intercom 1 Master 2 Slave :- 1 No.xiv) Oil Seal Φ90*Φ120*12 Main Shaft :- 1 No.xv) L/Door Sill Co/2 Tkp16105G05 Dw900 L1800 :- 1 No.xvi) Door Guide Shoe Bst :- 20 Nos.xvii) Set Car Door Contact :- 5 Nos.xviii) Skate Assy Sk40 Co & Lop :- 1 No.xix) Hanger Plate Rh Tkp13107 Dw800 L350:- 5 Nos.xx) Hanger Plate Lh Tkp13107 Dw800 L350 :- 5 Nos.xxi) Pcb Rl31 Tic Iv & V :- 1 No.xxii) Relay Type Mkg-3P 24VDC :- 3 Nos.xxiii) Labour Charges :- 1 No.xxiv) Local Sub Asy Sq Butn Braille 2:- 1 No.xxv) Local Sub Asy Sq Butn Braille 3 :- 1 No.xxvi) Local Sub Asy Sq Butn Braille G :- 1 No.xxvii) Local Sub Asy Sq Butn Braille Dr Open :- 1 No.xxviii) Local Sub Asy Sq Butn Braille Dr Cl :- 1 No.xxix) Local Sub Asy Sq Butn Braille Down :- 3 Nos.xxx) Local Sub Asy Sq Butn Braille Up :- 5 Nos.xxxi) Aux Block 3Rh2911-1Ha22 2No+2Nc :- 4 Nos.xxxii) IR 957B61-AC220V CABLE 3.5 MTR PS WECO :- 1 No.xxxiii) Inverter Door Ac 220v 1.3a Ip20 Nice900 :- 1 No.xxxiv) Aircord Metal Co Landing Dw800 L3350 NBS :- 4 Nos. |
| 102 | SH III :- Repair of 82.5 KVA DG Set One time repair/ Replacement of defective parts installed in existing 82.5 KVA DG Set i/c Supplying of following spare parts (Labour for installation of the genuine part is also included)i) FILTER, FUEL 3931063 |
| 103 | ii) CARTRIDGE, LUB OIL FILTER 3937743 |
| 104 | iii) SEPARATOR, FUEL WATER 4093731 |
| 105 | iv) ELEMENT, AIR CLEANER 3814695 |
| 106 | v) ELEMENT, AIR CLEANER 3814696 |
| 107 | vi) Pre Mixed Coolant 5 litre |
| 108 | vii) PETRONAS URANIA 1000 CH-4 20 Ltr |
| 109 | viii) EXIDE BATTERY 115 AH |
| 110 | ix) BATTERY TERMINAL |
| 111 | Credit for following old/dismantle material removal from site. a) Copper wire of size 1.5 Sq.mm, 4 sq.mm |
| 112 | b) Switch / Socket of 15/16 Amp |
| 113 | c) 3 HP Mon Submersible pump |
| 114 | d) 25 Litre Geyser |
| 115 | e) 1200 mm Sweep Ceiling fan / Exhaust Fan |
| 116 | f) 1200 mm Batten |
| 117 | g) Alum. Cable of size 3.5 x 185 Sq. mm |
| 118 | h) Main Panel with 900 A Bus Bar with connected accessories |
| 119 | i) Sub Panel with 400 A Bus Bar with connected accessories |
| 120 | j) 400 A FPMCCB Please Enable Macros to View BoQ information |
