|
| 1 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 2 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, refilling the trench etc as required. |
| 4 | Upto 35 sq. mm |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 6 | 4 X 16 sq. mm (28mm) |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 8 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | Supply, Installation, testing and commissioning of pre-wired, 150 watt, street light delivering 120 lumen/watt, IP66 protection, PDC housing and high impact resistance(IK07) glass cover luminaire 220-240 V, 50 Hz on existig street light pole/wall including all accessories and connection etc.as required. Equivalent to Philips Make, Philips Make, Cat No. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent model of Thorn/Trilux |
| 10 | Supply, erection, Testing and comissioning of hot dip galvanized octagonal steel pole of 5 Metre height made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick to accommodate the fitting on existing RCC foundation including Supply and fixing of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts, 12 Nos. of Nut, 4 Nos. of washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc. complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes(a) 6mm thick phjenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door (b) Supply and fixing of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6 Amp SPMCB 10 KA 'C' Series - 1 No. including mounting on DIN This includes making of founation of size 1200 mm x 400 mm x 400 mm made of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with proision of IN and OUT slot for cable entry including excavation and refilling etc. as required. (Make : Bajaj/ Transrail/Jindal/Tata) |
| 11 | 5 Metre height |
| 12 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE copper conductor un armoured power cable of 650/1100 KV grade of size 3C x 2.5 sqmm etc as required. |
| 13 | Supplying of one number PVC insulated and PVC sheathed / XLPE aluminium conductor armoured power cable of 1.1 KV grade of size 4C X 16 sqmm etc as required. |
| 14 | Supplying and Fixing of 500 mm long Over hang single arm bracket made of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole including Nut bolts etc. as required. (Make : Bajaj/ Paruthi/ Surya) |
| 15 | Double Arm Bracket |
| 16 | Single Arm Bracket Please Enable Macros to View BoQ information |
