|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 7 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 12 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 16 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms |
| 17 | PITC of 1000 LPH capacity IRFP with the specifications of i.e. (1) FRP pressure filter complete with associate pipe of 20/25 mm dia PVC/CPVC (2) pressure indicater 01 no. (3) 1 HP Raw water pump single phase (Make: Crompton/Kirloskar Mini) 01 no. (4) Iron removal filter: FRP Vessel 18\\"x65\\" (OD 24\\" &Ht 72\\") 01 no. (5) Multi Port Valve for filter/backwash/rins for 5000ltr/Hr. flow 01 no. (6) Media Sand & Gravels 500 kg (7) BERM Media for Iron removal 250 kg (8) MNO2 250 kg and maintenance upto 12 months from the installetion day. All complete (including any other on-site requirement for 1000 LPH IRFP) as per direction of Engineer-in-charge. |
| 18 | PITC of 500 LPH capacity RO plant with the specifications of i.e. (1) FRP pressure filter complete with associate pipe of 20/25 mm dia PVC/CPVC. (2) Multi port valve & fittings 01 no. (3) pressure indicater 01 no. (4) 1 HP Raw water pump single phase (Make: Crompton/Kirloskar Mini) 01 no. (5) Dual Media filter: FRP Vessel dia. 13\\" & Ht. 54\\" 01 no. (6) Iron removal filter FRP Vessel dia. 13\\" & Ht. 54\\" 01 no. (7) Multi Port Valve for filter/backwash/rins for 3000ltr/Hr. flow 02 no. (8) Dosing system: capacity 6 lph, pressure 7 bar 01 no. (9) Micron & Carbon filter Housing 02 no. (10) Micron & Carbon Membrene 02 no. (11) Heigh pressure pump 2 HP, single phase 01 no. (12) RO Membrane 02 no. (13) RO pressure tube with presser vessel 02 no. (14) Electrical panal for 5 KW, Auto/Manual Operated 01 no. (15) pressure gauge (Range: 0-100 psi =2 nos, 0-150psi =1 no, 0-300psi = 1no) 04 no. (16) Low pressure switch & High pressure switch 02 no. (17) Flushing pump: 1Hp, single phase 01 no. (18) Micron filter Housing with candle 01 no. (19) Antiscalant 50 ltr. (20) Rotameter (Range: 1000 ltr per hr) 02 no. (21) Online TDS Meter 01 no. (22) Plumbing, Fittings, Supporting frame, Antiscalent tank 100 ltr 01 no. (23) Media sand & gravels 200 kg. (24) Activated carbon 50 kg. (25) Anthracite 100 kg. (26) Iron Removal 100 kg. and provide water test report from any Gov. authorised laboratory and maintenance upto 12 months from the installetion day. All complete (including any other on-site requirement for 500 LPH RO plant) as per directions of Engineer-in-charge. |
| 19 | Modified estimated cost after using correction factor on 2023 (Items No.01 to 16 ) Please Enable Macros to View BoQ information |
