|
| 1 | Item No.1 :Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansAdd. Spec: Bd.A.1 Page No. 259SSR 2022-23 Sr.No.721 It.No.21.02 |
| 2 | Item No.2 :Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical MeansAdd. Spec: Bd.A.2 Page No. 259SSR 2022-23 Sr.No.725 It.No.21.06 |
| 3 | Item No.3 :Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.Add. Spec: Bd.A.11 Page No. 263SSR 2022-23 Sr.No.751 It.No.21.37 |
| 4 | Item No.4 :Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.754 It.No.21.40 |
| 5 | Item No.5 :Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd. E. 1 Page No. 287SSR 2022-23 Sr.No.827 It.No.24.01 |
| 6 | Item No.6 :Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd.F.3 Page No. 298 and B.7, Page No.38SSR 2022-23 Sr.No.836 It.No.25.11 |
| 7 | Item No.7 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd.F.5 Page No. 300 and B.7,Page.No. 38SSR 2022-23 Sr.No.841 It.No.25.31 |
| 8 | Item No.8 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd.F.6 Page No. 300 and B.7, Page No.38SSR 2022-23 Sr.No.846 It.No.25.50 |
| 9 | Item No.9 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd.F.11 Page No. 304 and B.7, Page No. 38SSR 2022-23 Sr.No.860 It.No.26.17 |
| 10 | Item No.10 :Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Add. Spec: Bd.G. 1 Page No. 313SSR 2022-23 Sr.No.889 It.No.27.01 |
| 11 | Item No.11 :Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAdd. Spec: Bd.G.5 Page No. 315SSR 2022-23 Sr.No.892 It.No.27.05 |
| 12 | Item No.12 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add. Spec: Bd.F.8 Page No. 302 and B.7, Page No.38SSR 2022-23 Sr.No.851 It.No.25.70 |
| 13 | Item No.13 :Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Add. Spec: Bd.F.17, Page No. 306SSR 2022-23 Sr.No.871 It.No.26.33 |
| 14 | Item No.14 :Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Add. Spec: Bd. L.2 Page No. 368SSR 2022-23 Sr.No.957 It.No.32.03 |
| 15 | Item No.15 :Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.Add. Spec: Bd.L.7 Page No. 369SSR 2022-23 Sr.No.963 It.No.32.11 |
| 16 | Item No.16 :Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Rg.M. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Rg.M.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Rg.M. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without boxAdd. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1235 It.No.39.42 |
| 17 | Item No.17 :Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1263 It.No.39.68 |
| 18 | Item No.18 :Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Sq.M as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.Add. Spec: Bd.U.1 Page No. 537SSR 2022-23 Sr.No.1291 It.No.40.01 |
| 19 | Item No.19 :Providing and fixing M.S. grill door 24 Kilogram/Sq.M of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc Add. Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.1224 It.No.39.31 |
| 20 | Item No.20 :Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. Add. Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.820 It.No.23.05 |
| 21 | Item No.21 :Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1254 It.No.39.58 |
| 22 | Item No.22 :Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.Add. Spec: Bd.M.12 Page No. 385SSR 2022-23 Sr.No.1029 It.No.33.42 |
| 23 | Item No.23 :Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1095 It.No.35.26 |
| 24 | Item No.24 :Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Add. Spec: As directed by engineer-in- charge. SSR 2022-23 Sr.No.1424 It.No.42.53 |
| 25 | Item No.25 :Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add. Spec: BD.V 5 page 551 and as directed by Engineer in chargeSSR 2022-23 Sr.No.1426 It.No.42.55 |
| 26 | Item No.26 :Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add. Spec: BD.V 5 page 551 and as directed by Engineer in chargeSSR 2022-23 Sr.No.1427 It.No.42.56 |
| 27 | Item No.27 :Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut completeAdd. Spec: Bd.V.9 Page No. 555SSR 2022-23 Sr.No.1337 It.No.41.43 |
| 28 | Item No.28 :Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Add. Spec: Bd.V.30 Page No. 565SSR 2022-23 Sr.No.1357 It.No.41.63 |
| 29 | Item No.29 :Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.Add. Spec: Bd.M.12 Page No. 385.SSR 2022-23 Sr.No.1011 It.No.33.24 |
| 30 | Item No.30 :Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.Add. Spec: Bd.M.13 Page No. 386.SSR 2022-23 Sr.No.1013 It.No.33.26 |
| 31 | Item No.31 :Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.Add. Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.1401 It.No.42.30 |
| 32 | Item No.32 :Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.Add. Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.1423 It.No.42.52 |
| 33 | Item No.33 :Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. Add. Spec: Bd.V.43, Page No. 574 SSR 2022-23 Sr.No.1383 It.No.42.12 |
| 34 | Item No.34 :Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130 mm and of required Length having Tensile strength not less than 330 Kilogram/cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete.Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1177 It.No.38.37 |
| 35 | Item No.35 :Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.Add. Spec: Bd.C.2 Page No. 275SSR 2022-23 Sr.No.816 It.No.23.01 |
| 36 | Item No.36 Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADAAdd. Spec: CD 8 Page 163SSR 2022-23 Sr.No.403 It.No.11.29 |
| 37 | Item No.37 :Providing & Fixing Ashlar stone fine flat, Machine cut Khandki Paving (size of stone 0.45 x 0.30 x 0.15M.) as per design & detailed drawing, from approved source of quality, including trasportation & conveyance to specific location, laying at a required slope in line, level over layer of 20 mm thick 1:1 Cement Mortar, with joints not exceeding 5 mm thick, with watering, curing etc. complete. including all material lead, lift, tools, scaffolding, clening, washing etc completed. Specification as directed by engineer in Charge.Rate Approved by S.E.P.W.C.Dharashiv vide Ltr.No.3796 Dt.26/Jun/2024 |
| 38 | Item No.38 :Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)Add. Spec: Bd.V.45, Page No. 575SSR 2022-23 Sr.No.1389 It.No.42.18 |
| 39 | Item No.39 :Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.Add. Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1575 It.No.46.39 |
| 40 | Item No.40 : Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) Add. Spec: CD.15 Page.No. 168 and B.7. Page No. 38SSR 2022-23 Sr.No.400 It.No.11.25 |
| 41 | Item No.41 : Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)Add. Spec: Bd.A.13 Page No. 264SSR 2022-23 Sr.No.753 It.No.21.39 |
| 42 | Item No.42 :Supplying soft murum at the road site, including conveying and stacking complete.Add. Spec: SSR 2022-23 Sr.No.103 It.No.02.29b |
| 43 | Item No.43 :Spreading hard murum/ soft murrum/ gravel or kankar for side width completeAdd. Spec: SSR 2022-23 Sr.No.104 It.No.02.30 |
| 44 | Item No.44 :Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.Add. Spec: SSR 2022-23 Sr.No.105 It.No.02.31 |
| 45 | Item No.45 :Supplying & Fixing DOUBLE BAR as directed by Engineer In Charge complete. Rate approved by Brihanmumbai Muncipal Corporation Chief Engineer's Department M& E UNIFIED SCHEDULE OF RATES MECHANICAL AND ELECTRICAL 2023It.No.R3-ME-13-1-cf |
| 46 | Item No.46 :Supplying & Fixing Shoulder Twirl Double as directed by Engineer In Charge complete.Rate approved by Brihanmumbai Muncipal Corporation Chief Engineer's Department M& E UNIFIED SCHEDULE OF RATES MECHANICAL AND ELECTRICAL 2023R3-ME-13-1-cy |
| 47 | Item No.47 :Supplying & Fixing Sky Walker as directed by Engineer In Charge complete. Rate approved by Brihanmumbai Muncipal Corporation Chief Engineer's Department M& E UNIFIED SCHEDULE OF RATES MECHANICAL AND ELECTRICAL 2023R3-ME-13-1-dc |
| 48 | Item No.48 : Providing and Fixing FRP / ROTO Wave Slide 2.1 mtr as directed by engineer in charge. Brihan Mumbai Municipal Corporation Chief Engineer's Department (M&E) Volume -1 UNIFIED SCHEDULE OF RATES for MECHANICAL AND ELECTRICAL Department 2023 GROUP O – PLAY APPARATUS R3-ME-14-1-d |
| 49 | Item No.49 : Providing and Fixing Double Arc Swing as directed by engineer in charge. Brihan Mumbai Municipal Corporation Chief Engineer's Department (M&E) Volume -1 UNIFIED SCHEDULE OF RATES for MECHANICAL AND ELECTRICAL Department 2023 GROUP O – PLAY APPARATUS R3-ME-14-1-j |
| 50 | Item No.50 : Providing and Fixing Standard See Saw as directed by engineer in charge. Brihan Mumbai Municipal Corporation Chief Engineer's Department (M&E) Volume -1 UNIFIED SCHEDULE OF RATES for MECHANICAL AND ELECTRICAL Department 2023 GROUP O – PLAY APPARATUS R3-ME-14-1-z |
| 51 | Item No.51 : Planting large flowering/ Shady trees (Ht. 2 mtr :- Digging pit with 0.9m x 0.9 m x 0.9 m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated materials upto a height of 0.30 m. and remaining height of 0.60 m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure thoroughly well, leveling, as directed, watering previous night, planting two to three year old minium 2.0 Mtr height, healthy trees sapling as per specifications, Maintaining till well established by watering, weeing, stirring of soil replacing of casualties etc. complete. Park & Garden DSR |
| 52 | Item No.52 : GARDEN SOIL:-Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 15 km. considered Excluding royalty.) Parks & Garden SSR 2022-23 Sr.No.1 |
| 53 | Item No.53 : Filling fresh garden soil /silt & manure in excavated area including lead up to a distance of 50 Mtrs (Rates Form PWD SSR 2022-23 / Sr. No. -2 Item No-2.30 Page no.-25 ) |
| 54 | Item No.54 : Providing on site well established (free from weeds /diesease etc.) ready to fix lawn turf in slabs/ rolls of required variety as directed . Parks & Garden SSR 2022-23 Sr.No.47 |
| 55 | Item No.55 : Providing Trees of bag size 18\\" x 18\\" as directed . 8 ft to 10 ft ht.Silver Oak |
| 56 | Deshi Badam |
| 57 | Drooping Ashok |
| 58 | Acalypha (Bag Size7\\" x 8\\") |
| 59 | Bongainvillea (Bag Size7\\" x 8\\") |
| 60 | Duranta golden (Bag Size7\\" x 8\\") |
| 61 | Duranta other (Bag Size7\\" x 8\\") |
| 62 | Eranthimum (Bag Size7\\" x 8\\") |
| 63 | Hamelia (Bag Size7\\" x 8\\") |
| 64 | Hibiscus (Bag Size7\\" x 8\\") |
| 65 | Justicia coccinia (Bag Size7\\" x 8\\") |
| 66 | Lantana (Bag Size7\\" x 8\\") |
| 67 | Malpighia coccigera (Bag Size7\\" x 8\\") |
| 68 | Telecoma stans (Bag Size7\\" x 8\\") |
| 69 | Bougavillae Thema (Bag Size7\\" x 8\\") |
| 70 | Bougavillae Glabra (Bag Size7\\" x 8\\") |
| 71 | Item No.56 :Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. completeAdd. Spec: A directed by Engineer in charge SSR 2022-23 Sr.No.1038 It.No.33.51 |
| 72 | Item No 57: Survy Charges survecy charges for side selection of Bore well |
| 73 | Item No 58: Drilling of borewell 150 mm dia including cost of all labour fuel machinery and transportation charges etc.comp. |
| 74 | Item No 59: Providing and erecting casing pipe 180 mm dia UPVC 6 kg / sqcm casing pipe suitable for 150 mm dia bore well as per IS 4985 1988 |
| 75 | Item No 60: Giving Yeild Testing for surface bore well etc complete. |
| 76 | Item No 61: providing and erection Bore well cap suitable for 180 mm dia UPVC casing pipe etc |
| 77 | Item No 62: Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP |
| 78 | Item No 63: Providing and supplying in standard lengths Polyethelene Pipes conforming to IS-4984/14151/12786/13488 with necessary jointing material like mechanical connectors, i.e. thread /insert joint /quick release coupler joint / compression fitting joint or flanged joint, including transportation and freight charges, inspection charges, loading/ unloading charges, conveyance to the departmental stores /site and stacking the same in closed shade duly protecting from sunrays and rains, excluding GST etc. complete. |
| 79 | Item No 64: Lowering laying jointing HDPE/MDPE pipes in proper position including all specials by Compression fitting /Electrofusion and But fusion jointing procedure with all materials for jointing procedres like Electrofusion machine, Electric mirror /heater/But fusion welding machine with hydraulic jack, to plaoding clamp etc pump and accessories for hydraulic testing and all labours as directed by engineer in charge as per IS-7634 Part II. |
| 80 | Item No 65: Providing and erection road type earthing (electrode of 20 m dia GI Rade or GI pipe 40 mm dia) 2.5 Mtr burried in eath of driven in the earth with blows of moderate force) with necessary double GI earth strip complete erected connected to meartes switch gear earth terminal for four pumpset |
| 81 | Item No 66: Supplying and erecting 3 core 4 sq. mm. flat flexible submersible cable with copper conductor, PVC insulated & sheathed.3 core 4 sq mm |
| 82 | Item No 67: Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamelpaint complete. |
| 83 | Item No 68: Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined meter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 84 | Item No 69: Providing and errecting LED type indicating pilot lamp worth LED Colours RED / Yellow / Green) 230 / 250 volt on provided box panel with necessary material wiring & connections etc complete. |
| 85 | Item No.70 :Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge Add. Spec: MORTH 801SSR 2022-23 Sr.No.284 It.No.06.36 Please Enable Macros to View BoQ information |
