Tender For Provision Of Street Lights Fittings Along With Allied Accessories In Heera Park Holy Cross School Area, Lokram Park, Raghubir Enclave A,B & C- Block, Virendra Market, Lokesh Park, Lokesh Park Extn., Gupta Market Indra Market, Gulia Enclave, Najafgarh-Delhi
TDR : 55227877
Tender Notice
BOQ
9 Days Left
Najafgarh
Delhi
Tender For Provision Of Street Lights Fittings Along With Allied Accessories In Heera Park Holy Cross School Area, Lokram Park, Raghubir Enclave A,B & C- Block, Virendra Market, Lokesh Park, Lokesh Park Extn., Gupta Market Indra Market, Gulia Enclave
Name of Work:- Provision of Street Lights fittings along with allied Accessories in Heera park Holy Cross School Area, Lokram Park, Raghubir enclave A,B & C- Block, Virendra market, Lokesh park, Lokesh park Extn., Gupta market Indra Market, Gulia enclave, Rajiv Vihar, Aggarwal colony, Ekta Vihar, Baba Haridas Nagar, Baba Haridas Enclave, Maksudabad main A,B,C,D & F-Block, Ratiram park, Naya Bazar, Naya Bazar A,B & C-Block, Vijay park, Ajay park, Deepak Vihar, Deepak Vihar Extn., Indra Park, Indra Park extn. Guru Nagar Amar Vihar, Bajrang enclave, Sai baba enclave DVB colony, Roshan Mandi, Laxmi Garden, Laxmi Vihar, Nathu Ram Park, Neelkanth enclave in Ward 128 under Najafgarh Zone.
Sl. No.
Item Description
1
Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-45, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80 , under voltage and over voltage protection,EMI EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) 45 watt
2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm
3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm
4
Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.
5
Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd.
6
Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm
7
Providing and fixing of stainless steel name plate of size 6 x 8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
