|
| 1 | Cat (A) -Items to be supply and fixing |
| 2 | Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of rubbish off from the premises at a distance not exc. 50 mt. from starting point etc. complete |
| 3 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including removal of rubbish off from the premises at a distance not exc. 50 mt. from starting point etc. complete |
| 4 | Dismantling floor or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete |
| 5 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.), any thickness includingcover fillets etc. complete |
| 6 | Dismantling damaged asbestos cement sheets from roof covering, removal of debris from the site etc. complete |
| 7 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete |
| 8 | Dismantling timber scantlings 40 sq. cm and over in section as in purlin, in any position etc. complete |
| 9 | Dismantling framed trusses not exc. 10 m span etc. complete |
| 10 | Demolition of Roof padding, coving (other than ground floors) including removal of rubbish off from the premises at a distance not exc. 50 mt. from starting point etc. complete |
| 11 | Taking down cement plaster on brickwork or concrete surfaces including raking out joints, hacking for key etc. complete |
| 12 | Taking down damaged doors shutters exc.1.0 Sqm but not exc. 2.0 sqm, etc. complete |
| 13 | M & L for excavation over areas in hard/dense soil in floor, getting out the spoil & deposited at a distance not exc. 50 mts. from starting point etc. complete |
| 14 | M & L for excavation over areas in soft/loose soil in floor, getting out the spoil & deposited at a distance not exc. 50 mts. from starting point etc. complete |
| 15 | M & L for moorum filling in floors & paving, laid in layers, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. complete |
| 16 | M & L for hardcore or broken stone of gauge not exceeding 63mm, deposited, spread, leveled in layers, watered & leveled to a plain surface etc. complete |
| 17 | S & F TMT bars 10 mm dia. & over, ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete |
| 18 | S & F TMT bars 6 to 8 mm dia., ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete |
| 19 | M & L for Brickwork with fly ash bricks in C. M. 1:4, straight or curved on plan including scaffoldings, curing etc. complete |
| 20 | M & L Cement concrete Type B1, 1:2:4 (20 mm graded aggregate) for Coping over wall, slightly rounded or chamfered angles and throating with necessary formwork, compaction, curing etc. complete. |
| 21 | M & L cement concrete 55mm average thickness over RCC slab for maintaining proper slope as per site condition Type- B0, 1:2:4 mix (12.5 mm graded aggregate), finishing the concrete surface even & smooth including necessary scaffolding, curing etc. complete |
| 22 | M & L for laying cement concrete in Roof kerbs, coving, rounded or chamfered on edge, Type B0, 1:2:4 mix (12.5 mm graded aggregate), compaction, curing etc. complete |
| 23 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends for crack repair and cutting chases for concealed water tubing, concealed conduit wiring and making good, cutting exc. 10 cm but not exc. 20 cm girth etc. complete |
| 24 | S & F structural steel for Roof trusses (framed), trussed, purlins, rafters, posts, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates etc. including welding/riveting etc. complete |
| 25 | Plain, galvanised, mild steel sheeting 1.00 mm thickness in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with coach screw to mild steel framework etc. complete |
| 26 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (Make-Ispat Industries Ltd. / SAIL / TATA / Century Wells Roofing Ind. Ltd. / Jindal or equivalent) as in roof covering/cladding to wall & designed ridge, fixed with self-drilling & tapping hexagonal head screws & bituminous felt & neoprene/EPDM washer etc. using all necessary safety appliances etc. complete |
| 27 | S & F Flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides including both faces is covered with decorative face veneer with lipping/ frame to match etc. |
| 28 | S & F Door accessories for one door viz. Mild steel Butt hinges heavy weight 100mm long - 3 Nos., Mild steel Aldrop - 300mm long - 04 Nos., Aluminium Tower Bolt 200mm long - 04 Nos., Cast iron or malleable cast iron handles, cast type, stove enamelled black 150mm long – 4 Nos. etc. complete |
| 29 | M & L for P.C.C. in floor 100 mm thick, Type-B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface of concrete even & smooth with using extra cement including necessary formwork, compaction with vibrator, curing etc. complete. |
| 30 | M & L for forming 12mm thick Expansion joints in 100mm thick concrete floor, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A etc. complete |
| 31 | M & L for P.C.C. in floor 150 mm thick, Type-B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface of concrete even & smooth with using extra cement including necessary formwork, compaction with vibrator & making impression of expanded metal whilst concrete is green , curing etc. complete. |
| 32 | M & L for forming 12mm thick Expansion joints in 150mm thick concrete floor, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A etc. complete |
| 33 | S & F Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc. complete |
| 34 | S & F Vitrified Ceramic tiles dark Shade / Double tiles charged/ultracharged shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles including bedding layer 35mm thick in C. M. 1:6, Make- Kajaria/Johnson/Somany/Asian or equivalent etc. complete |
| 35 | S & F joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer 35mm thick in C. M. 1:6 Make- Kajaria/Johnson/Somany/Asian or equivalent etc. complete |
| 36 | S & F Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Make- Kajaria/Johnson/Somany/Asian or equivalent etc. complete |
| 37 | Rendering plaster 20 mm thick on wall in C.M. 1:4 including finishing the surface even and smooth without using extra cement, using necessary scaffolding, curing etc. complete |
| 38 | M & L for finishing wall/ceiling surfaces with using 3mm thick wall care putty of Make-Birla / Asian / Berger / Nerolac or equivalent of 1st quality including stopping depression & sand papering to have even & smooth surface etc. complete |
| 39 | S & F Anodised aluminium snap grid frame work for false ceiling all as specified, Size of grid 605mm x 605mm etc. complete |
| 40 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified etc. complete |
| 41 | S & F Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/ Aluminium framework with screws in ceiling etc. complete |
| 42 | S & F G. I. water tubing 25mm bore dia., medium grade, Make- Tata/Prakash Surya/Jindal or equivalent, galvanised with screwed socket joints together with all tube fittings such as bends, elbows, tees, short pieces, caps. Plugs, union etc. & fixed complete to walls and ceilings or laid in floors etc. complete |
| 43 | S & F G. I. water tubing 15mm bore dia., medium grade, Make- Tata/Prakash Surya/Jindal or equivalent, galvanised with screwed socket joints together with all tube fittings such as bends, elbows, tees, short pieces, caps. Plugs, union etc. & fixed complete to walls and ceilings or laid in floors etc. complete |
| 44 | S & F Rotational moulded polyethylene water storage tanks 2000 litre capacity (cylindrical vertical with closed top), ISI mark, IS-12701-1991, Make- Sintex, Plasto, Everest or equivalent, hoisted and fixed in position for fixing hexagonal running nipple etc. complete |
| 45 | S & F PTMT Nipple suitable for HDPE water tanks (minimum weight for 32mm dia. Nipple – 65 gms) fixed over pvc water tanks as a inlet & outlet, overflow & wash out with plug, Make-Sintex, Prayag India, Polytuf, Plasto or equivalent. Nipple should be hexagonal with check nut, rubber washer etc. complete |
| 46 | S & F Ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe & fixed (minimum weight 25mm – 455 gms) Make- Sintex, Prayag India, Polytuf, Plasto or equivalent etc. complete |
| 47 | S & F Gun metal Gate valve 25mm dia. Make- Boss/Neta/Leader or equivalent, female thread with iron wheel head, screwed both ends for iron pipe including all necessary accessories etc. complete |
| 48 | S & F Wash Hand Basin fully pedestal, Make- Jaguar Cat. No. CNS WHT-801 (Wash Basin) & CNS WHT-301 (Pedestal) or equivalent etc. complete |
| 49 | S & F European W. C. pan with PP soft close seat cover, Hinges, fixing accessories and accessories set Size- 350 x 530 x 400mm with S-trap fixed on floor, Make- ESSCO Model No. ECS-WHT-553SSPP or equivalent etc. complete |
| 50 | S & F Wall Mixer with provision for overhead shower with 115mm long Bend pipe on upper side, connecting Legs & wall flanges Make- Jaguar Cat. No. CON-273KNUPR or equivalent etc. complete |
| 51 | S & F Central hole Basin Mixer with pop up waste system with 450mm long braided hoses, Make- Jaguar Cat. No. CON-167KNB or equivalent etc. complete |
| 52 | S & F Bib Cock 15mm bore dia. stainless steel Make- Jaguar Cat. No. CON-037KN or equivalent etc. complete |
| 53 | S & F Flushing cistern 10 litre capacity, PVC valveless, symphonic action type, low level, white, with inlet, ball valve, float and handle including brackets, Make- Sintex, Plasto, Prayag India, Hindware, Johnson or equivalent etc. complete |
| 54 | S & F Straight plain brass ferrules 25mm dia. (or connecting screws) screwed both ends and fixed |
| 55 | S & F exposed part kit of concealed Stop Cock with fitting sleeve, operating lever & adjustable wall flange Make- Jaguar Cat. No. CON-083FTK or equivalent etc. complete |
| 56 | S & F Angular Stop Cock with wall flange Make- Jaguar Cat. No. CON-059KN or equivalent etc. complete |
| 57 | S & F Towel Rod stainless steel 600 mm long, Make- Jaguar Cat. No. CAN-1111SM or equivalent etc. complete |
| 58 | S & F Towel Ring Round, Make- Jaguar Cat. No. AQN-7721 or equivalent etc. complete |
| 59 | S & F Soap Dish holder stainless steel Make- Jaguar Cat. No. CAN-1131N or equivalent etc. complete |
| 60 | S & F Hand shower 105 mm round shape Single flow with Air effect (ABS body & Face plate Chrome plated) with Rubit Cleaning System including all necessary accessories Make- Jaguar Cat. No. HSH-1717 or equivalent etc. complete |
| 61 | S & F Hand Shower (Health Faucet) with 8mm dia. 1 meter long flexible tube & wall hook Make- Jaguar Cat. No. ALD-573 or equivalent etc. complete |
| 62 | S & F Double Coat Hook, stainless steel Make- Jaguar Cat. No. CAN-1161N or equivalent etc. complete |
| 63 | S & F Toilet Paper holder with flap recessed type (Stainless steel) Make- Jaguar Cat. No. AHS-1553 or equivalent etc. complete |
| 64 | S & F Flush valve complete with 32mm size control cock with elbow set & wall flanges (Regular size) fixed to European W. C. pan, Make- Jaguar Cat. No. FLV-1015 or equivalent etc. complete |
| 65 | S & F Veneered particle boards interior grade 18/19 mm thick, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work etc. complete |
| 66 | S & F sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste fittings 32mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with Flush pipe of polyethylene of low or high density or PVC. 32 mm dia. for low level cistern etc. complete |
| 67 | S & F two way Bib cock chromium plated 15mm dia. etc. complete. |
| 68 | M & L Synthetic enamel painting on woodwork / joinery - 2 coats over one coat of wood primer including all preparatory works, Make-Asian/ Berger/Nerolac/Shalimar paints or equivalent paints of 1st quality shall only be used in the work etc. complete |
| 69 | M & L Synthetic enamel painting on ironwork - 2 coats over one coat of red oxide primer including all preparatory works, Make-Asian/ Berger / Nerolac / Shalimar paints or equivalent paints of 1st quality shall only be used in the work etc. complete |
| 70 | M & L Plastic Emulsion painting on walls / ceiling - 2 coats over one coat of wall primer on previously painted surfaces, make- Asian / Berger / Nerolac / Shalimar or equivalent paints of 1st quality including all preparatory works such as brooming down, stopping nail holes, cracks, depression with plaster of paris after removing old loose scales etc. complete |
| 71 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint on wall & ceiling surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces, Make- Asian / Shalimar / ICI / Berger / Nerolac of 1st quality paints only shall be used in the work including all preparatory works such as stopping nail holes, depression with plaster of paris after removing all loose scales & removal of existing treatment wherever required with wire brush & water jet etc. complete |
| 72 | S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube etc. complete |
| 73 | S & F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of stainless steel wire gauzed. The wire gauze shallbe wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and jointed with solvent cement, Make- Rajshri/Reliable or equivalent etc. complete |
| 74 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door frame of Size 50 x 100mm comprising of virgin PVC polymer of K value with property of being termite/borer proof, water/moisture proof and fire retardant Make- Rajshri, Reliable or equivalent etc. complete |
| 75 | S & F factory made single extruded WPC (Wood Polymer Composite) solid panel plain flush door shutter of 30mm size with property of being termite/borer proof, water/moisture proof and fire retardant, Make- Rajshri, Reliable or equivalent etc. complete |
| 76 | S & F Door accessories for one door viz. Butt hinges 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed - 3 Nos., Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy- 2 Nos., Aluminium Tower Bolt 200mm long - 02 Nos., Aluminium handles 150mm long, cast type, anodised – 2 Nos. etc. complete |
| 77 | S & F Chequered cement concrete tiles 20cm x20cm x 25mm thick or as per site requirement with bedding layer 50mm thick in C. M. 1:6, set, jointed and pointed in neat cement slurry in floors with white cement & pigments etc. complete |
| 78 | Taking down / dismantling of existing aluminium point wiring, main switches, cut-out carefully inside the DB and making good to disturbed surface of walls with proper filling to match existing wall surface etc. |
| 79 | M & L Modular switch 1 way 6A, 1 module (white) to be fixed on Modular metal flush box with modular cover plate and frame. Suitable module size of Metal box to be fixed inside the wall as per site requirement. Make: Legrand/havells /wipro or equivalent etc. complete |
| 80 | S & F modular Socket outlet Socket, 6A - 2/3 pin combined 2 module, (white) to be fixed on Modular metal flush box with modular cover plate and frame. Suitable module size of Metal box to be fixed inside the wall as per site requirement. Make: Legrand/havells /wipro or equivalent etc. complete |
| 81 | S & F heavy duty stepped type modular electronic fan regulator of 2 module, 230 volt, 50hz (white) to be fixed on Modular metal flush box with modular cover plate and frame. Suitable module size of Metal box to be fixed inside the wall as per site requirement. Make: Legrand / havells / wipro or equivalent etc. complete |
| 82 | Supply and fixing LED tube light 1x 22-24 W, 120-300v, 50 hz with holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size with ceiling rose. LED tube light should be T8 ,4 feet with minimum 1800 lumens, 6500K colour temperature, to be fit on a good standard aluminium tube light patti, side holder of tube light patti should be metal type with holder for fixing tube light. Fitting to be fixed on wall with clamp or suitable fixing accessories as per site requirement. Tube light to be covered one year standard warranty against defect from date of installation. Make of tube light : Philips / wipro / osram or equivalent etc. complete |
| 83 | Supply and fixing Socket 6/16-20A - 2 Module (white) to be fixed on Modular metal flush box with modular cover plate and frame. Suitable module size of Metal box to be fixed inside the wall as per site requirement. Make: Legrand / havells / wipro or equivalent etc. complete |
| 84 | Supply & Fixing of 4 way double door sheet metal TPN MCB DB of 415 volt, 50hz with following items (A) FP MCB of 100 Amp.-1 No. as incomer (B) 5-32Amp. single pole MCB-12 Nos. as out-going with ISI mark as per IS/IEC 60898-1 complete inside quarters as per site requirement with all fixing accessories on wall, cable to be terminated with suitable lug. Make: legrand / siemens / L&T or equivalent etc. complete |
| 85 | Supply & Fixing or drawing of sub-main cables of size 2.5 sq. mm. two single core of multi-coloured (2 x 2.5 sq. mm) PVC insulated ISI marked stranded copper conductor cables with continuous run of 1X1.5sq.mm. green colour pvc insulated copper Conductor cable as a Earth wire (Make: finolex/Havells or equivalent) cables as per IS-694-1990 drawing into pvc conduit pipe on/inside wall and cutting of holes in wall / concrete as per the site requirement , of any length with proper lug at termination end of cable etc. complete |
| 86 | Supply & Fixing or drawing of sub-main cables of size 4.0 sq. mm. two single core of multi-coloured (2X4.0 sq. mm) PVC insulated ISI marked stranded copper conductor cables with continuous run of 1X2.5sq.mm. green colour pvc insulated copper Conductor cable as a Earth wire (Make: finolex/Havells or equivalent) cables as per IS-694-1990 drawing into pvcl conduit pipe on/inside wall and cutting of holes in wall/ concrete as per the site requirement , of any length with proper lug at termination end of cable etc. complete |
| 87 | S & F One point wiring of 5 pin 5 Amp. Socket outlet point on same board with other switches, sockets with 2.5 sq. mm stranded copper Conductor PVC sheathed cables as per IS-694-1990, Make- Havells/Finolex or equivalent with all accessories etc. complete. |
| 88 | S & F One light/ fan/ bell and independent plug pt. to be controlled with surface / concealed wiring of :(a) 1.5 sq. mm. colour coding Single core PVC insulated ISI marked Stranded copper Conductor cables as per IS-694-1990, Make:- Havells / Finolex or equivalent.(b)PVC piping with ISI mark, 1.8mm. to 2.2 mm. thick PVC pipe of 25 mm. dia. of size (make: cello/press fit / modi / finolex / super plast or equivalent & all accessories with joints, covers etc. to be concealed /surface on wall(c)Continuous 1 sq.mm. Green colour pvc insulated suitable copper earth wire through inside the PVC pipe.(d)wiring to be terminated on a suitable size of concealed M.S. modular Board with cover plate for fixing modular switches, sockets, regulators etc. as per site requirement with all civil related works like plastering & painting to match existing colour etc. complete |
| 89 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, and Copper winding of sweep 250mm to be fixed in window as per site requirement with all fixing accessories. Make: Havells/bajaj/C.G. or equivalent etc. complete |
| 90 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers with Copper winding be fixed in window as per site requirement with all fixing accessories. Make: Havells/bajaj/C.G. or equivalent etc. complete |
| 91 | S & F One power point or 3 pin socket outlet. 15 amps, independent, with cables to be controlled with concealed wiring of :(a) 4.0 sq. mm. colour coding Single core PVC insulated ISI marked Stranded copper Conductor cables as per IS-694-1990, Make:- Havells / Finolex or equivalent .(b)PVC piping with ISI mark, 1.8mm. to 2.2 mm. thick PVC pipe of 25 mm. dia. of size, Make: cello/press fit / modi / finolex / super plast or equivalent & all accessories with joints, covers etc. to be concealed inside wall(c)Continuous 1.5 sq.mm. Green colour pvc insulated suitable copper earth wire through inside the PVC pipe.(d)wiring to be terminated on a suitable size of concealed M.S. modular Board with cover plate for fixing modular switches, sockets, regulators etc. as per site requirement with all civil related works like plastering, painting to match existing colour etc. complete |
| 92 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make: Philips/wipro or equivalent. Fitting to cover one year warranty etc. complete |
| 93 | Supply, Laying and Connection of insulated / Sheathed armoured heavy-duty electric cable any length as per site requirements with aluminium conductor, 1100V grade of 25 sq.mm. of 3 ½ core of PVC / XLPE insulated cables conforming to IS:1554-I / IS:7098-I, BS:6346, IEC:60502, BS:5467, BS:6724ISI in trenches with termination at feeder pillar / DB of L.T. panel with proper size of glands, lugs as per site requirement. Make (Cable): Havells/polycab or equivalent etc. complete. |
| 94 | Excavation in trenches nexc.1.5mtr wide &1.5mtr depth in soft/ loose soil & getting out etc. for laying of cables etc. complete |
| 95 | Supply and laying of sand filling in cable trenches and spreading in a uniform layer etc. complete |
| 96 | Supplying and laying unreinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm in cable trenches etc. complete |
| 97 | Returning, filling excavated soil, including spreading, Levelling, watering and well ramming in layers in cable trenches cover etc. complete |
| 98 | S & F or drawing of sub-main cables of size of multi-coloured (4X6.0 sq. mm) PVC insulated ISI marked stranded copper conductor cables with continuous run of 2X4.0sq.mm. pvc insulated copper Conductor cable as a Earth wire (Make: finolex / Havells or equivalent) cables as per IS-694-1990 drawing into pvc conduit pipe on / inside wall and cutting of holes in wall / concrete as per the site requirement of any length with proper lug at termination end of cable etc. complete |
| 99 | S & F of integral driver 60W LED streetlight with a nominal system lumen output of 6000 lumens and a minimum system efficiency of 100 lumen/watt. The luminaire shall have rated system lifetime of minimum 25,000 burning hours. The luminaire should have CCT 5700K and a CRI>70. The luminaire shall meet IP66 and operating Voltage 170-270VAC, & PF>/=0.95. Inbuilt surge protection 4KV. The luminaire housing should be made of pressure die cast aluminium, lens and optical cover should be made of PC window. Fitting Make: Philips/wipro/oshram or equivalent. . Fittings to cover2 years warranty period from date of fixing. Fitting should be fitted on wall with bracket 40 to50mm dia. as per site requirement. Fitting to be duly approved by OFCH representative for above work before supplying etc. complete |
| 100 | Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2/3 KW capacity 12-15 litre, BEE 5 Star rated complete with all fixing accessories such as safety valve, thermostate, NRV, connection piece etc. as per site requirement. Make: Bajaj/Havells or equivalent |
| 101 | S & F of GI steel tubes of medium grade 40 mm dia. in trenches/on pole etc. as per site requirement with all fixing accessories etc. Make: SAIL/Jindal/Surya/Tata or equivalent etc. complete |
| 102 | S & F MCCB 4 Pole, 415 V, thermal magnetic adjustable type, 63Amps with breaking capacity 25 KA in a suitable double door type M.S. enclosure, fixing stand with lug for termination for 3.5 core of 25 sq.mm. cable to be terminated in this MCCB as per site requirement with all suitable fixing accessories as per site requirement etc. complete |
| 103 | Supply and fixing Modular telephone socket RJ11 (white) to be fixed on Modular metal flush box with modular cover plate and frame. Suitable module size of Metal box to be fixed inside the wall as per site requirement. Make: Legrand/havells /wipro or equivalent |
| 104 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion adequate charcoal dust and common salt inside eart pit. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost etc. complete |
| 105 | S & F of outdoor Pedestal lantern garden light with following specification A. Fitting should be IP65 protection with black premium finish colour with aluminium body of dimension 156x156x600 mm of 9 wattage LED fitting. Fitting should be fixed with suitable concrete foundation with all fixing accessories. Make: Philips (cat no. 58176)/bajaj/wipro or equivalent etc. complete |
| 106 | S & F of chandelier of french gold finish with class A clear crystal pendant. Chandelier dimension should be minimum 300x H360 in mm with G9 lamp base of wattage 4x42max. Fitting to be hanged on ceiling with all fixing arrangement.as per site requirement. Make: philips (cat no.581843)/wipro/bajaj or equivalent etc. complete |
| 107 | S & F of wall light with shiny stainless steel base over a predominant frosted glass of dimension with 125x150x240 in mm with E27 lamp base of wattage 1x20max. Fitting to be fitted on wall with all fixing arrangement.as per site requirement. Make: philips (cat no.58184)/wipro/bajaj or equivalent etc. complete |
| 108 | S & Fixing including commissioning with all suitable accessories for in-door type double door feeder pillar panel board powder coated hinged type front door locking system fabricated from CRCA of 1.6mm sheet steel with M.S. channel base frame .panel should be pretreated and spray painted with grey paint. Size of panel as per site requirement with sufficient space for termination of 3/4 no. 3.5 core of 240 sq.mm. pvc/XLPE cable, Panel consisting of (1) 250Amp. thermal magnetic type MCCB (4 pole).-02 Nos.(I/C) (2) O/G-250Amp. thermal magnetic type MCCB (4 pole)-1 No. with multifunction energy meter (3) Al. flat bus-bar of 250Amp. Capacity- 4 Nos. with pvc coated. Make SDF: L&T / SIEMENS or equivalent (4) LED type indicating lamps RYB with control fuses for incoming phase supply indication(5) Height of feeder pillar should be 2/3feet suitable height above ground for working in feedar pillar with all civil works with proper gland and lug as per site requirement. (Drawing/Sample of DB to approved before fixing. no flexible wiring to be used for incomer/outgoing from bus-bar for power supply etc. complete. Please Enable Macros to View BoQ information |
