|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar complete all as specified and directed . |
| 2 | M & L for Walling of random rubble, uncoursed , built in CM 1:6 complete all as specified and directed . |
| 3 | All as Item No -02 but except stone complete all as specified and directed . |
| 4 | M&L for flush pointing to random rubble stone masonary upto course in CM 1:4 Complete all as specified and directed . |
| 5 | M&L for brick work with old size sub class 'B' burnt bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | M&L for half brick thick wall with old size fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed . |
| 9 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4.complete all as specified and directed . |
| 10 | M&L for two coat of cement base paint on new decorated surfaces of walls including preperation of surfaces complete all as specified and directed . |
| 11 | M&L for one coat of cement base paint on old decorated surfaces of walls including preperation of surfaces complete all as specified and directed . |
| 12 | Demolition cement concrete (unreinforced) of any descriptions, in ground floors not exc. 15 cm thick, above or below ground level, complete all as specified and directed. |
| 13 | M&L Plain cement concrete type D2 1:4:8 (40mm graded aggregate) , in foundation, filling and mass concrete, complete all as specified and directed. |
| 14 | Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete in post hole complete all as specified & directed. |
| 15 | Dismantling chain link fencing wiremesh, any type complete all as specified and as directed by the Engineer-in-charge. |
| 16 | Dismantling posts or struts (steel or RCC) any section embadded in concrete, brick work etc including taking out embedded portion. |
| 17 | Excavating in post holes hard/dense soil (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed. |
| 18 | S&F angle iron section with swain neck as in fencing posts struts including notching drilling holes for wire mesh etc and fla iron fillets for securing wire mesh etc including all necessary drilling, bolting or riveting and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 19 | Fixing only chain link fencing in-cluding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified & directed. |
| 20 | Supply only mild steel Galvanised wire Chain link fencing square mesh of any size made out of any size wire complete all as specified & directed |
| 21 | Supply only mild steel 10mm dia round bars to secure Chain link fencing complete all as specified & directed |
| 22 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends with washers n . Exc 12mm dia and , n exc 5cm long complete all as specified and as directed. |
| 23 | M & L for Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to steel surfaces n. exc 10cm width or girth including preparation of surfaces |
| 24 | S & F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised MS wire staple or steel pins etc as directed (each line wire to be measured.) in repairs. |
| 25 | M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer. |
| 26 | Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern. complete all as specified |
| 27 | S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc.complete all as specified |
| 28 | S & F, Rolled tubular sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.and similer work conforming to Fe-290 Gde E-165 .complete all as specified and directed. |
| 29 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 30 | M & L, Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scr-ews as spfd, complete all as spfd and directed by Engr-in-Charge. |
| 31 | Dismantling of cast iron or reinforced concrete drain pipes ,jointed in cement mortar and taking out of trenches if requried . |
| 32 | M&L reinforced concrete pipes, 600mm bore, class NP-3 laid and jointed complete with collars all as specified and directed |
| 33 | Taking down steel rolling shuters ,bevel gear box and crank handle type ,gear operated from position including top cover pipe ,shaft ,chain pulley etc but excluding guid rail ,refixing in same position after straightening ,rectifying warped ,buckled parts if any including greasing /oiling area n.exc 15 sqm each complete all directed . |
| 34 | Taking down steel rolling shuters ,bevel gear box and crank handle type ,gear operated from position including top cover pipe ,shaft ,chain pulley etc but excluding guid rail ,refixing in same position after straightening ,rectifying warped ,buckled parts if any including greasing /oiling area exc 15 sqm but n. exc 25sqm each complete all directed . Please Enable Macros to View BoQ information |
