|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall coverings |
| 2 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed. |
| 3 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed. |
| 4 | M&L for 1.5 mm thick galvanised steel sheet as in valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge. |
| 5 | Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), including removing deebris out side MD land complete all as specified and directed. |
| 6 | Demolition of plain cement concrete/brick bat of any description and in any position , in roof etc upto height of roof 25mtr all as specified and directed by EIC. Note:Debris of demolished Concrete shall be removed from roof through lift,all as specified and directed. |
| 7 | M&L for cleaning, washing the concrete surface of roof, chajja etc and brushing neat cement slurry with 3.0 kg of cement per Sqm all as directed . |
| 8 | M&L PCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope, mixed with water proofing compound @ 3% weight of cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately). |
| 9 | M&L for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with no woven polyester mat of weight not less than 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ends respectively) etc including taking down all as specified and directed. The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing. ( Roof treatment work shall be carried out by authorised applicator only). |
| 10 | Supply only integral water proofing compound of ISI marked complete all as specified and directed. |
| 11 | M&L for cement concrete tiles 25 cmX25 cmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick screedbed layers in CM 1:3 complete all as specified and directed. |
| 12 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 2000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, including taking down old unsv water tank all as specified and as directed. |
| 13 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, including taking down old unsv water tank all as specified and as directed. |
| 14 | Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc and removing debris out side MoD land complete all as specified and directed. |
| 15 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM (1:4) mixed with water proofing compond @ 3% by weight of cement and finished surface even and smooth without using extra cement. Note:- water proofing compond shall be measured and paid separately. |
| 16 | M&L for rendering 10 mm thick on fair face of brick/concrete surfaces in CM (1:6) finished surface even and smooth without using extra cement complete all as specfified and directed. |
| 17 | M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surface in ceiling finished the surface even and smooth with out using extra cement complete all as specified and as directed |
| 18 | Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 30mm thick polymer plaster (1:5:15, polymer,cement, Quartz sand) and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok or Techno commercial equivalent as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately) |
| 19 | M&L for mild steel Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples, weight n exc 4 Kg per Sqm, supplied and fixed in frame work of any type complete all as specifired and directed. |
| 20 | M&L for prepration of old decorated external wall surfaces & applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including removal of vegitation and fill with smart care putty to match with existing surfaces complete all as specified and directed |
| 21 | M & L for preparing new plastered surfaces of walls applying wall care putty not less than 2 mm thick over a coat of alkali resistant primerand applying two coats of oil emelsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 22 | M&L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified. |
| 23 | Dismantling false ceiling/boarding/partition wall any description fixed in any position with nails complete all as specified and directed |
| 24 | Supply & Fixing upto any floor height powder coated (50 micron minimum thickness) Aluminium anodised frame and shutter for door, windows, ventilators etc. with one or more rebates including joining cleat for fixing etc. fixed type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding rollers, rubber gasket etc. complete all as specified and directed by the Engineer-in-charge Note:a) Glazing shall be measured separately. b) Item shall be paid as per weight of aluminium section.c) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc., as required which shall not be measured for arriving the weight.d) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.Note:- Aluminium window shall be factory made, contractor shall make arrangement for visiting the factory site during the currency of work (if required). The size of aluminium section shall be as per HQ CE(N) MZ TD Drawing No. TD/2021/01 to 05. |
| 25 | M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors complete all as specified and directed. |
| 26 | M&L for 12 mm thick prelaminated particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work including all necessary fittings such as knob,hinges,lock,for cupboard and others including taking down old board of any type complete all as specified and directed |
| 27 | S&F stainless steel butt hinges of 100 mm size with ss scews complete all as specified and directed. |
| 28 | S&F 300 mm long aluminium alloy, sliding bolts of extruded section or cast aluminium alloy ISI marked fixing clips and fixing bolts complete all as specified and directed. |
| 29 | S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed. |
| 30 | S & F150 mm size. extruded aluminium alloy handles fabricated type ISI marked complete all as specified and directed. |
| 31 | M&L for false ceiling made out of 595x595 mm thick ceiliing board / tiles of 6mm thick, deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x38x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3 mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed (Make -Armstrong/Chanakya/Everest Techno commercial eaquivalanat as approved. |
| 32 | Dismantling wrought iron or mild steel work aof any description and in any position complete all as specified and as directed |
| 33 | M & L for mild steel in framed roof trusses rafter, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc cutting welding jointning etc complete all as specified and directed |
| 34 | M&L for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 35 | M&L for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 36 | Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed |
| 37 | Taking down chowkats or frames not exc 1.5sqmeach with shutter (without taking off shutter from the frame) complete all as specified and as directed |
| 38 | Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping and removing debris out side MoD land complete all as specified and directed. |
| 39 | M&L for brick work with sub class 'B' bricks old size, fstraight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed. |
| 40 | M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 41 | M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 42 | M&L glazed coloured ceramic tiles 450x300x7 mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and inlcuding 10mm thick backing coat in CM 1:4 etc complete all as specified and directed |
| 43 | S&F solid PVC door frame of size 50 mmx 47mm made out of 5 mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified. |
| 44 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\\" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed. |
| 45 | Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) including necessory scafolding complete all as specified and directed. |
| 46 | S &F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with dash throgh fastners and rain water bracket suitable for 160 mm bore pipe spacing 1.5 m c/c as per CE (Navy) mumbai drg No TD/2023/01 or laid in floor complete all as specified and directed. complete including ss clamping , scafolding etc all as specified and directed. |
| 47 | Taking down 15mm bore, GI tubing and connections in any position complete all as specified and directed. |
| 48 | Taking down 20 mm bore, GI tubing and connections in any position complete all as specified and directed. |
| 49 | S&F 15 mm bore medium grade galvanized steel tubing ISI marked with all fittings fixed to walls, ceilings or laid under floors all as specified and directed. |
| 50 | S&F 20 mm bore medium grade galvanized steel tubing ISI marked with all fittings fixed to walls, ceilings or laid under floors all as specified and directed. |
| 51 | S&F for PVC (SWR) bends any radius 110 mm bore fixed with rubber ring joint complete all as specified and as directed |
| 52 | S&F for PVC (SWR) bends any radius 75 mm bore fixed with rubber ring joint complete all as specified and as directed |
| 53 | M&L for 100m bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls with suitable size of GI clamps complete all as specified and directed. |
| 54 | M&L for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to wall with suitable size of GI clamps complete all as specified and directed. |
| 55 | S&F CI bends 100 mm bore diminishing pieces or trapers (larger bore measured) fitted with oval access doors of 100mm sizes all as specified and directed. |
| 56 | S&F CI bends 75 mm bore diminishing pieces or trapers (larger bore measured) fitted with oval access door all as specified and directed. |
| 57 | S&F in repair 100 mm bore cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete (1:2:4, type B1using 20 mm graded crushed stone aggregate ) complete all as specified and directed. |
| 58 | S&Fin repair 75 mm bore cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete (1:2:4, type B1using 20 mm graded stone aggregate ) complete all as specified and directed. |
| 59 | S&Fin repairs of vitreous china urinal, half stall type complete including plugs, bedding fixing on wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in coloured cement , fixing with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed . |
| 60 | S&F fixed in repair Wash hand basin vitreous china size 550 x 400 mm including bracket and all necessary connected items such as waste coupling 32mm waste pipe complete all as specified and directed. |
| 61 | S&Fin repair 15 mm bore pillar tap fancy type cast copper alloy capstan head chromium plated with long screwed shank and fly nuts screwed down for iron pipe or for brass ferrule , complete all as specified and directed. |
| 62 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe)including seat cover and fixed in position complete all as specified and directed. |
| 63 | S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed. |
| 64 | S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuding brackets complete all as specified and directed. |
| 65 | S&F brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified. |
| 66 | S&F in repairs brass CP shower rose 125mm size complete all as specified and directed. |
| 67 | S & F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 68 | M&L in repairs 600x450 mm beveled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 69 | S&Fin repair 15 mm bore bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule , complete all as specified and directed. Make : As approved |
| 70 | S&F in repair fancy type cast copper alloy chromium plated stop valves 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union complete all as specified and directed. Make : As approved |
| 71 | S & F health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1 m long PVC tube with wall hook chromium plated fitted to stopcock complete all as specified and as directed Make : As approved |
| 72 | M&L double charge premium quality vitrified ceramic tiles 9-10mm thick polished area of each tiles not exceeding 0.36 Sqm, in floors/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed. Make : As approved |
| 73 | SF in repair coloured PVC wall panelling 3 to 5 mm thick in vertical surfaces cutting , moulding, angle, cleat, batterns with screws, glue, etc complete all as specified and directed. |
| 74 | Demolition of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar including removing debris out side MD land complete all as specified and directed. |
| 75 | M&L for 18-20mm thick granite stone slab of machine cut mirror polished in flooring , bedded and jointed with grey cementpaste and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 76 | S & F in repair PVC insulation rubber mat 2mm thick any coloured fixed over floor/steel/concrete as per manufacturer instruction all as specified and directed by Engineer-in- Charge |
| 77 | M & L for 18-20 mm thick, machine cut, mirror polished Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20 mm thick screed bed in CM 1:6 complete all as specified. |
| 78 | M & L for 18-20 mm thick, machine cut, mirror plolished Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified. |
| 79 | M& L preperation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 80 | M& L preperation of old decorated surface of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 81 | M&L for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 82 | M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 83 | M&L for preparation of old surfaces of of wall any description & applying one coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall work shall be carried out up to 1 to 4 storeys buildings complete all as specified and direced. |
| 84 | M&L for preparation of RCC/PCC roof structure an evenly a coat of cold bitumin at 1 Kg per Sqm and applying seating cloth over cold bituminous , finally paving bitumen of any penetration at 1.8 Kg per Sqm all as specified and as directed. Please Enable Macros to View BoQ information |
