|
| 1 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling of existing tile complete all as specified. |
| 2 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 3 | M&L for dark/light coloured vitrified tiles 8-10 mm thick joint free (square/rectangular) area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 4 | M&L for green marble work 16-18mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and the like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15 mm thick screed bed in CM 1:4 including demolition of existing marble complete all as specified and directed. (Note :- The marble shall be fixed in one piece only i.e no joint shall be allowed). |
| 5 | M&L for granite (of any type) work (table rubbed and polished) 16-18mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of existing work complete all as specified and directed.(Note :- The marble shall be fixed in one piece only i.e no joint shall be allowed). |
| 6 | Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc |
| 7 | M&L for brick work with sub class 'B' old size fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 8 | M&L for 15mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement incl taking down existing plaster and raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 9 | M&L for 12 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster and raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 10 | M&L for 5 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster and raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 11 | M&L for preparation of new plastered surface and applying two coats of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper of wall over a coat of wall putty on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L preparation of old plaster surface and applying one coat of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L preparation of old plastererd surface after complete removal of existing treatmnt and applying two coats of Oil bound distemper on walls on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L preparation of old plastered surface and applying two coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for complete removal of existing treatment and preparation of old decorated surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2013, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 18 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed. |
| 19 | Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter for the chowkats) complete all as specified and directed. |
| 20 | S&F pressed steel frame made of 1.25mm thick for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc complete of size 125x60mm complete all as specified and directed. |
| 21 | M&L for PCC 1:3:6 type C-0, (using12.5mm gradded crushed stone aggregate) as in door frame etc complete all as specified & directed. |
| 22 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum grain density of 750 kg/ cum, screw withdrawal strength of 2200 N (face) & 1100 No (edge), minimum compressive strength of 58 N/ mm² , modules of elasticity 900 N/ mm² and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F factory made solid PVC moulded shutter of size 28mm to 30mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site all as specified and directed. |
| 24 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed. |
| 25 | S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauge but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and directed. |
| 26 | S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. Note: Wire cloth, glass shall be measured and paid for separately |
| 27 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ventilator complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately |
| 28 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each complete all as specified and directed. |
| 30 | S&F figured glass pin head type glazing with oil puty glass 3mm thick, fixed with oil puty in square n exe 0.5sqm in each pane. |
| 31 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 32 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 33 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/ bolt in metal/wooden frame to be carried out complete all as specified and directed. |
| 34 | S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed. |
| 35 | S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 36 | S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 through bolt or with screw complete all as specified and directed. |
| 37 | S&F aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, fixing and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 38 | M&L for prelaminated particle board size 18/19mmm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in shutters, shelves and partitions, fixed with screws to timber frame work including taking down existing board all as specified & directed. |
| 39 | S&F 150mm hasp and staple, safety type, brass, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 40 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings incl taking down existing ISI marked all as specified |
| 41 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings incl taking down existing ISI marked all as specified |
| 42 | S&F rotational moulded polyethylene 3-layer water storage tank of 500 ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable tank all as specified & directed. |
| 43 | S&F rotational moulded polyethylene 3-layer water storage tank of 1000 ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable tank all as specified & directed. |
| 44 | S&F in repair ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore complete all as specified and directed. |
| 45 | S&F in repair gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 46 | S&F in repair stop valves or angle valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed. |
| 47 | S&F in repair bib taps cast copper alloy 15mm bore fancy type chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 48 | S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed. |
| 49 | S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints, any size, including fixing to steel pipe or union with brass CP arm 195mm long, 15 mm size complete all as specified and directed. |
| 50 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repair 15 mm brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 52 | S&F in repairs vitreous china wash down water closet (pedestal pattern) fixing with bolts, white colour, incl stainless steel L-type jet spray with 1m hose pipe, connection to trap and to flushing pipe, anti-syphonage pipe, etc. incl seat cover complete including making good to floor complete all as specified and directed. |
| 53 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with a set of integral foot rest with `P’ or `S’ trap including water connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. |
| 54 | S&F in repair vitreous china wash basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed. |
| 55 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed. |
| 56 | S&F in repair Vitreous china coloured WC italion finish pedestal pan with attached vitreous china flushing cistern (monolithiic type) of push button type having dual flushing cistern of same colour including pvc seat cover same colour including CP Jet chromium plated with pvc connection 15mm bore complete all as specified and directed. |
| 57 | S&F in repair PVC low level duel flushing cistern (duel type) 10 ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed. |
| 58 | S&F in repair grating doom 100 mm dia with waste hole of CP complete all as specified and directed. |
| 59 | S&F in repair 600mmx450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as directed by Engineer-in-Charge. |
| 60 | S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor including dismantling of existing all as specified & directed |
| 61 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified. |
| 62 | Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required all as directed by Engineer-in-Charge. |
| 63 | S&F in repair PVC (SWR ) bends 110 mm bore any radius all as directed by Engineer-in-Charge. |
| 64 | S&F in repair PVC (SWR ) bends 75 mm bore any radius all as directed by Engineer-in-Charge. |
| 65 | S&F in repair PVC (SWR ) single junction ( single T ) 110mm bore equal or unequal all as directed by Engineer-in-Charge. |
| 66 | S&F in repair PVC (SWR ) single junction ( single T ) 75mm bore equal or unequal all as directed by Engineer-in-Charge. |
| 67 | M&L PVC (SWR ) floor trap 100/75 mm plain with grating including jointing with solvent cement all as directed by Engineer-in-Charge. |
| 68 | S & F Stack clamps for 110 mm pipe out of 20mmx1.5mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 69 | S & F Stack clamps for 75 mm pipe out of 20mmx1.5mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 70 | Supply and fixing in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 71 | S&F in repair waste coupling of CP (half or full threaded) . (minimum weight 32mm- 45gms) all as directed by Engineer-in-Charge. |
| 72 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 73 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm all as directed by Engineer-in-Charge. |
| 74 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floors to raise level complete all as specified. |
| 75 | M&L for coloured chequered cement concrete tiles with grey cement and pigment, 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing tile and screed complete all as specified and directed. |
| 76 | M&L for 60mm thick M-35 grade pre cast machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006 fixed with grey cement and no pigment, filling joints with sand, over and including 25mm thick sand filling including demolition of existing tiles and screed all as specified and as directed. |
| 77 | M&L for vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, set, jointed and pointed in neat cement slurry with white cement and pigment as in path/ floor, pattern of tile as approved by GE over and including 15mm thick screed bed in CM 1:6 including demolition of existing tiles and screed complete all as specified and directed. |
| 78 | S&F pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls,fixed with self tapping screws including dismantling of old asbestos/corrugated/semicorrugated sheet all as specified and directed. |
| 79 | Dismantling framed work timber scantlings 40 sqm and over in section, in any position complete all as specified and directed. |
| 80 | S&F rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engineer-in-Charge. |
| 81 | M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface. |
| 82 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as directed. |
| 83 | Form work to rough finished surface of concrete flat to soffits of shelves, chajja, fins, cover slab, similar work etc including supports over hangs complete all as specified and as directed. |
| 84 | Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 85 | M&L for RCC in 1:1.5:3 type A-0 (using 12.5 mm graded stone aggregate) as in chajjas facia, shelves, cover slab etc and similar work complete all as specified and as directed. |
| 86 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise described complete all as specified and as directed. |
| 87 | M&L for 75mm thick cement cocnrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge. |
| 88 | M&L for rendering 15mm thick in CM 1:4 in sunken portion of slab finished fair and even using waterproofing compound complete all as specified and as directed. (Note : Supply only WPC shall be measured and paid separately). |
| 89 | Supply only integral water proofing compound |
| 90 | M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.30 litre /Sqm after cleaning surface complete all as specified and directed. |
| 91 | M&L for PCC 1:7:12 type E-2 (using 40mm graded crushed stone aggregate) as in filling, foundation and mass concrete in sunken floor including demolition of PCC above ground floor and in any position complete all as specified and as directed. |
| 92 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base for receiving the floor finishes complete all as specified & directed. |
| 93 | S&F in repair 7-8 mm thick PVC hollow wall panelling consisting of wood grain printed pvc sheet inclusive of solvant cement and fixing at site on PVC frame formed by sticking high density EPS, flame retardent (TF) grade, heavy duty with tipper strip weather proof, water proof, termite proof including all C and U type PVC section with matching of panelling fixing at border of panelling and complete all as specified and directed by Engr-In-Charge. |
| 94 | S&F in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed. |
| 95 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 96 | Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed. |
| 97 | S&F Gl powder coated frame work for seamless false ceiling, size of grid 605 x 605mm with main tee of size, 32mmx 23.5 mm x1.5mm thick, cross tee of size 25mm x 23.5mm x1.28mm and angle of size 23.5mmx23.5mm x 1.2 mm fixed on wall all powder coated finish on exposed surface of tee and angle, hung from ceiling using 2mm dia GI suspension wires and 'J' bolts , washers, nuts spaced at 1200mm both ways including making niches for fans/light all as specified and as directed. |
| 98 | S&F 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed. |
| 99 | M&L for remove existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/ cracksand enhance the adhesion of the coating. • Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12hrs. Apply second of undiluted coat @ 0.45ltr/sqm and allow it to dry for 4 to 5hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . (Note :- Application of water proofing treatment will be done by Authorised Applicator of the firm only) . |
| 100 | S&F anodised aluminium door shutters, aluminium section weighing not less than 1.00kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos (200mm long) in each door, hinges (150mm long), anodised aluminum snap beading screws etc incl taking down old existing complete all as specified. |
| 101 | S&F anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) incl taking down old existing complete all as specified. |
| 102 | S&F anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc incl taking down old existing and complete all as specified. |
| 103 | S&F 4.8mm thick sheet glass ordinary quality in squares or rectangular not exceeding 0.50sqm in each panes in aluminium door or window shutter complete all as specified and directed. |
| 104 | S&F in repair 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 0.5 sqm in each panes in aluminium door or window shutter complete all as specified and directed. |
| 105 | S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed. |
| 106 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 107 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 66,246/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
