|
| 1 | Scarifying or picking gravelled macadam or bituminous macadam exc 50mm but not exc 100mm in deep, surfaces in area exc 400 sqm and removing exc 50 metres and stacking complete all as specified and directed. |
| 2 | M&L 7.5cm thick (compactedthickness) WBM, with coarse aggregates of grading 2 (63 to 40mmsize) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber requried using mechanical paver as specfied and directed. |
| 3 | Description All as per item No 02 here-in-before but except stone aggregate. |
| 4 | Screening road metal, chipping etc on the site of the work, when specially ordered including removing screen material clear of screen and stacking in separate heaps for measuring (material from both side of screen measure) all as specfied and directed. |
| 5 | M&L for premix bituminous macadam using paving bitumen any penetration @ 4% by weight of total mix laid/rolled compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed. |
| 6 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning cleaned surface with gunny bags to remove all loose dirt complete all as specified and directed. |
| 7 | Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed. |
| 8 | M&L for bituminous premix semi dense asphaltic concrete consolidated thickness 30 mm with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade, mixed in hot mix plant, rolled and compacted to required camber and gradient complete to a uniform surface all as specified and as directed. |
| 9 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all per manufacturers instruction complete all as specified and directed. |
| 10 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Make: Mr Illumination/3M/Aktion/Dark eye. |
| 11 | S&F in repairs solar cat eye aluminun alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystatie solar panel 2.4V / 0.3 watt one Nl-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 12 | S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 radium tape of 25 mm wide strips with anti theft steel net for reflector protection including enbedding in pcc 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 13 | Demolition of Concrete of any description and in any position not otherwise specifically provided for kerbs complete all as specified. |
| 14 | M&L Providing precast cement concrete type B1 1:2:4 using 20mm graded stone aggregate in window or door cills, lintels,bressumers, steps,quoin blocks (for use with masonry), string courses, copings,kneelers, apexstones, pier caps,columns,posts,boundary pillars,bed plates, pintle,blocks, ancho-rageblocks, bonders(for stone walling).corbels, brackets,etc. (of any section indicated), withplain fair faces,including chamfers, weatherings,throating etc. and setting in mortar complete with joints to match all as specfied and as directed. |
| 15 | M&L PCC 1:3:6 type C2 (40 mm graded stone aggregate) in foundation filling and mass concrete or post holes all as specfied. |
| 16 | M&L cement concrete work in pavement/Hardstanding of flexural strength 40 kg/per square centimetre in field using 400 kg cement per cubic metre, thickness of concrete 25 Cm or less complete all as specfied and directed. |
| 17 | M&L Forming Construction joint 150 mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as directed. |
| 18 | M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150mm thick concrete slab complete all as directed. |
| 19 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,if requried complete all as specified and as directed. |
| 20 | M&L for 200mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars in trenches and jointed all as specified and directed. |
| 21 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for bed to drain pipe 200mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested all as specified and directed. Please Enable Macros to View BoQ information |
