|
| 1 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep, getting out in soft/loose soil, complete all as specified and as directed by the Engineer–in–Charge. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and Labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Material and Labour brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Removing surplus excavated material to a distance not exceeding 50m and depositing where directed, complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Material and labour reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Material and labour reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in pillars, posts,struts, piers, columns and stanchions, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | Material and labour formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surfaces of concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions, work in rough finished square, rectangular or polygonal surfaces of concrete, complete all as specified and as directed by the Engineer-in-Charge |
| 12 | Material and labour reinforced cement concrete M-25 (design Mix) using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | Material and Labour for Reinforced cement concrete Design mix M-25 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likedack slab, complete all as specified. |
| 14 | Material and labour formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, for roughed finished surface of concrete, complete all as specified and as directed by the Engineer-in-Charge |
| 15 | Material and labour formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc., also splays between floors and beams, etc., work in rough finished flat surfaces of concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and Labour formwork to soffits of suspended slabs such roof slab, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) flat for rough finished surfaces of concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Material and Labour TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Material and labour TMT steel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers etc, cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia, complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finishing the surface even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete walls surfaces of internal in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Material and labour for rendering 05 mm thick on fair faces of brick work or concrete ceiling surfaces, chajjas, etc. in cement mortar (1:3) and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Material and labour broken stone hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Material and labour 75 mm thick PCC (1:4:8), Type D–2, using 40mm graded crushed stone aggregate as in sub base of floor etc and finished even and fair without using extra cement complete, all as specified and as directed by Engr-in-charge. |
| 24 | Material and Labour providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work, complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Material and Labour Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Material and labour glazed ceramic coloured tiles joint free 1st quality in vertical surfaces/ skirtings/dados of size 300 x 600 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection etc. and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Material and labour for preparation of new plastered/unplastered surfaces and applying two coats of white lime wash on surfaces of walls, chajjas, roof projection, complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of ceiling, chajjas, roof projection, complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge |
| 31 | Supply and fixing Factory made coloured solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC 'C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge |
| 32 | Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces .(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet(d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf.(v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf(vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf(vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 33 | Material and labour for sheet glass 3.00mm thick , ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | Supply and fixing 250mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter, complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | Supply and fixing 150 mm long aluminium handle cast type anodised, complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | Supply and fixing stainless steel butt hinges 100 mm long medium weight and fixed complete, all as specified and as directed by the Engineer-in-Charge. |
| 37 | Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Supply and fixing Vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 600 mm long 32mm bore HDPE waste down pipe, and 32 mm CP waste coupling including CI brackets, complete all as specified and as directed by the Engineer-in-Charge.Note:- Cost of PVC connection and waste pipe are included in this item. |
| 39 | Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, ISI marked, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr-in-charge. |
| 42 | Material and labour 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete, all as specified and as directed by the Engineer-in-Charge. |
| 43 | Supply and fixing GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete, all as specified and as directed by the Engineer-in-Charge |
| 44 | Supply and fixing GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete, all as specified and as directed by the Engineer-in-Charge |
| 45 | Supply and fixing 15 mm stop valves/ angle cock ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and as directed by the Engineer-in-Charge |
| 46 | Supply and fixing 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Supply and fixing water storage tank, 500 litre capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm bore high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Supply and fixing ball valves, high pressure of PTMT of 20 mm dia with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Min weight 15 mm dia 142 gms), complete, all as specified and as directed by the Engineer-in-Charge |
| 49 | Supply and fixing bib taps 15mm bore fancy type, brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device and brass chromium plated Jet spray with PVC pipe and complete accessories, complete all as specified and as directed by the Engineer-in-Charge.Note: The cost of traps, CP jet spray, PVC White seat cover, flushing cistern and PVC flush pipes are included in this item. |
| 51 | Supply and fixing of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | Supply and fixing 110mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete all as specified and as directed by the Engineer-in-Charge |
| 53 | Supply and fixing 75mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete all as specified and as directed by the Engineer-in-Charge |
| 54 | Supply and fixing 75 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | Supply and fixing 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | Supply and fixing 75 mm bore PVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed by Engineer-in-charge. |
| 57 | Supply and fixing 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access doors, complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | Supply and fixing 75mm bore PVC (SWR) junction single (Single T) equal or unequal with access doors, complete all as specified and as directed by the Engineer-in-Charge. |
| 59 | Material and labour for 10mm thick heavy duty (digital) vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , complete all as specified and as directed by the Engineer-in-Charge. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’ |
| 60 | Supply and fixing 5-8mm thick solid/ Hollow profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required, complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Supply and fixing PVC (SWR) reducer of 75 x110 mm bore, complete all as specified and as directed. |
| 62 | Material and labour vibratory rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006, ISI marked of 60 mm thickness, grade M-35 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick, complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Material and labour for providing precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Material and labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc |
| 66 | Material and labour for concrete bed in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm dia (internal) pipes, complete all as specified and as directed by the Engineer-in-Charge. (Pipes shall be measured & paid separately). |
| 67 | Supply and fixing for 150mm dia Salt-glazed stoneware drain pipes, grade 'A' laid in trenches and jointed in cement mortar (1:1), complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 110 mm dia, complete all as specified and as directed by the Engineer-in-Charge. |
| 69 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 70 | Description all as per serial item No. 69 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Description all as per serial item No.69 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Description all as per srl item No 69 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.Note : (i) Point wiring shall be done in a manner that not more than 01 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 73 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixing of modular socket outlet multipin combined, 6 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply and fixing of modular socket outlet multipin combined, (6pin), 6/16 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body, complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Supply and fixing PVC White Freshner Exhaust Fan 250mm sweep, 1400 RPM, Aerodynamically designed blanced blades, Rust proof body, Low power consumption, 5 blades complete with Louvers easy to mount, complete all as specified and as directed by Engineer-in-charge. SKU Code 70049 of make Bajaj or equivalent in make given in Appx 'B'. |
| 79 | Supply and fixing LED batten fitting 20 watt, 4 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LBLN-20-C-SQ of make Orient or equivalent make given in Appx 'B'. |
| 80 | Supply and fixing LED light fitting, mirror type with high output diffuser 2 feet, 10 watt, 220V AC, decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | Supply and fixing MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. Cat Part No 811008 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 82 | Supply and laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 83 | Note:- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit Page No…………………. of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
