|
| 1 | STEEL FURNITUREREPAIR TO ALMIRAH MED STEEL(FD-1032/87M) :-Removing of old unsv,broken and rusty components from Almirah med steel and S & F new component made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat synthetic enamel paint over a coat of red oxide primer, complete all as specied and as directed by Engr-In-Charge/GE.:- LEG |
| 2 | All as per srl item No 1.01 here-in-before but new shelves . |
| 3 | Dismantling of unserviceable bushes of locking assembly and S & F new Brass bushes of locking assembly as directed by Engr-in Charge. |
| 4 | Dismantling of unserviceable three way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge. |
| 5 | Dismantling of unserviceable lock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge |
| 6 | S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle. |
| 7 | All as per srl item No 1.01 here-in-before but for bottom. |
| 8 | REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES(FD-1031) :- Removing of old unsv,broken and rusty components from Almirah Large steel and S & F new compnent made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat o synthetic enamel paint over a coat of red oxide primer, complete all as specied and as directed by Engr-In-Charge/GE.:- LEG |
| 9 | All as per srl item No 2.01 here-in-before but Shelves |
| 10 | Dismantling of unserviceable bushes of locking assembly and S & F new Brass bushes of locking assembly as directed by Engr-in Charge. |
| 11 | Dismantling of unserviceable three way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge. |
| 12 | Dismantling of unserviceable lock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge |
| 13 | S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle. |
| 14 | All as per srl item No 2.01 here-in-before but for bottom. |
| 15 | BED HARD (MAP) (FD/E6/MAP/08(R) :-Removal of old unsv 12 mm thick ply wood from top of bed. S & F new 12 mm thick (7 Ply) commercial plywood BWR gradeISI Mark IS;303 / IS:710, Make - Kitply, Century, Greenply. to be fixed with appropriate sizes of MS nuts, bolts and washers without having any joints complete all as specified and directed by Engr-in-Charge. |
| 16 | Removing of unserviceable 18 mm particale board from head board and S&F new 18 mm thick exteior grade HDHMR (High Density high resistance moist fibreboard) board both side laminated of approved shade with 4mm thick seasoned teakwood beading all round with suitable screws with the cleats complete all as specified and directed by Engr-in-Charge. |
| 17 | Removing of unserviceable 18 mm thck pre laminated partical board from foot board and S&F new 18 mm thick exteior grade HDHMR (High Density high resistance moist fibreboard) board both side lminated of approved shade with 4mm thick seasoned teakwood beading all round with suitable screws with the cleats complete all as specified and directed by Engr-in-Charge. |
| 18 | Removal of old unsv and rusty long rail (25x65mm rectangle pipe) from Bed Hard (Map) and S&F new long rail (25x65mm rectangle pipe 18 gage) Shape and Size as per existing/ as per drwg duly painted and as directed by the Engr-in-Charge. |
| 19 | Removal of unserviceable head board (complete set) from Bed Hard (Map) S&F new head board (complete set) shape and size as per drwg. all as specified and directed by Engr-in-Charge. |
| 20 | Removal of unserviceable foot board (complete Set) from Bed Hard (Map) S&F new foot board (complete set) shape and size as per drwg. all as specified and directed by Engr-in-Charge. |
| 21 | Removal of old unsv/rusty stiffner from bed and S&F new stiffner 25x25mm,18 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. |
| 22 | REPAIR TO CHARPOY GI PIPE WITH PLY TOP(FD-220/1122) :-S&F 12 mm thick plywood ISI Marked as per IS;303 /IS:710, Make Kitply, Century, Greenply. commercial type BWR grade, size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer , including removal of old unserviceable ply top.complete all as specified and directed by Engr-in-Charge. |
| 23 | Removal of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F for dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Sr No 5.00 to the required size for short rail including threading at both ends complete all as specified and directed by Engr-in-Charge. |
| 25 | Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 20 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge. |
| 26 | Supply and fixing MS flat iron of size 40mmx5mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply and fixing MS flat iron of size 40mmx5mm thick , 150 mm long between long rail and short rail on each corner, providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed by Engr-in-Charge. |
| 30 | CHARPOY WITH HARD TOP (FD/MAP-II/01) :-Removal of old unsv 12 mm thick ply wood from top of Charpoy. ISI mark as per IS:303 / IS:710 make Kitply, Greenply, Century. S & F new 12 mm thick (7 Ply) commercial plywood BWR grade to be fixed with appropriate sizes of MS nuts, bolts, 25 x 60 x 6 mm MS Cleat welded with frame to support ply and washers without having any joints complete all as specified and directed by Engr-in-Charge. |
| 31 | Removal of old unsv and rusty long rail (25 x 65 x 16 mm tube frame) from Charpoy (MAP) and S&F new long rail (25 x 65 x 16 mm M S Tube frame) Shape and Size as per existing/ as per drwg duly painted and as directed by the Engr-in-Charge. |
| 32 | Removal of old unsv/rusty MS tube legs from charpoy and S&F new MS Tube legs 32 x 32 mm,16 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. |
| 33 | Removal of old unsv/rusty stiffner from charpoy and S&F new stiffner MS Tube 25 x 25 mm,16 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. |
| 34 | REPAIR TO TABLE OFFICE CLERK STEEL FD-307/1004 :- Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick HDHMR, Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 35 | S&F New drawers with appropriate size , with locking device as per drg and as directed by Engr-in-Charge. |
| 36 | Removal of old unsv broken leg from Table office clk steel and S & F new leg made of out of 25mm square MS tube wall thickness 1.25mm made to shape & size as pe drwg duly painted. |
| 37 | Removal of old unsv lock from Table office clk steel and S&F new lock 4 lever with 2keys fixed to drawer with appropriate screw/welding as per drwg. |
| 38 | Removal of old unsv drawer handle from drawer of Table office clk steel and S&F new drawer handle shape and size as per existing and as per drwg. |
| 39 | TEAPOY VARAMDAH MAP Drg No FD/E6/MAP/17 :-Removing of old unsv top of teapoy and S&F new Top of Teapoy of 18/19mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 40 | Removing of old unsv legs and S&F new made of 18mm square MS pipe made to shape and size as per drwg duly painted. |
| 41 | Removing of old unsv base tray and S&F new bas tray made of 5mm dia MS bar made to shape and size as per drwg duly painted. |
| 42 | TEAPOY VARAMDAH Drg No FD-255 :-Removing of old unsv Top of Teapoy varandah and S&F New Table Top of 18/19mm HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 43 | CHAIR REVOLVINING HIGH BACK:-Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC seat cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS 250/- per mtr) |
| 44 | Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC back cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of back seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS 250/- per mtr) |
| 45 | Removing of old unsv Hydraulic System and S&F New Hydraulic System superior quality complete all as per drg and directed by Engr-in-charge |
| 46 | Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge |
| 47 | Removing of old unsv Caster Wheel and S&F New Caster Wheel made of superior Quality complete all as per drg and directed by Engr-in-charge |
| 48 | Removing of old unsv Pedestral Assembly complete with caster wheel and S&F New Metalic Pedestral Assembly complete with castor wheel complete all as per drg and directed by Engr-in-Charge |
| 49 | CHAIR WRITING (MAP) - (FD/E6/MAP/12) :-Removing of old unsv 12mm thick plywood upholstered with fabric and moulded polythene foam with PVC lipping all round from seat and PVC seat cover and S&F new 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round and PVC seat cover. (Note Fabric cloth not less than Rs 250/- per meter) Shape and size as per drg. |
| 50 | Removing of old unsv 12mm thick plywood upholstered with fabric and moulded polythene foam with PVC lipping all round from back and PVC back cover and S&F new 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round and PVC back cover. (Note Fabric cloth not less than Rs 250/- per meter) Shape and size as per drg. |
| 51 | Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge |
| 52 | TABLE BED SIDE MAP Drg No FD/E6/MAP/15(R) :- Removing of old unsv the existing broken or unserviceable components of table bed side MAP, S&F new components of Table Bed Side MAP,HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge.Top |
| 53 | Back Ply 6mm |
| 54 | Drawer Handle |
| 55 | Drawer with telescopic channel as per drg. |
| 56 | Pull out tray with telescopic chaneel as per drg. |
| 57 | RECANING OF CHAIR VARAMDAH (FD-19(M)/359/256) :-Recaning the Chair Varamdah with 4mm to 4.5 mm wide half round plastic cane white/cream colour in matt pattern all as specified and shown on drawing and as directed by Engr-in-Charge |
| 58 | M&L for denting and painting of following items of steel furniture with red oxide and two coats of synthetic enamel paint with spraying machine make Asian, Berger, Nerolac, Indigo. (inner and outer surface i.e almirah, locker, table office steel and table bed side steel) ( hammer tone paint and colour as approved by GE/Engr-in-Charge) after removing of old paint with grinder machine and preparation the surface smooth with filling the putty, scraping with abrasive emery paper all as specified and shown on drawing and directed by GE/Engr-in-Charge :-Almirah Large Steel With Shelves (Different colour shutter, sides and back |
| 59 | Almiraha Large Steel 1/2 H x 1/2 Shelves (Different colour shutter, sides and back as directed by Engr-in-charge) |
| 60 | Almirah Medium with shelves (Different colour shutter, sides and back as directed by Engr-in-charge) |
| 61 | Bed Hard (MAP) |
| 62 | Charpoy with hard top (MAP) |
| 63 | Chair Varamdah |
| 64 | Chair Varamdah MAP |
| 65 | Locker Bed Side Steel (Different colour shutter, sides and back as directed by Engr-in-charge) |
| 66 | Table Clk Steel |
| 67 | Table Office Officer Steel |
| 68 | Table Bed Side Steel Hospital |
| 69 | Table Bed side (Map) |
| 70 | Table steel 3 x 2 with/without Drawer |
| 71 | Teapoy Varamdah |
| 72 | WOODEN FURNITUREREPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :-Removal of old unsv Ply from Bed Hard and S&F new Ply 12mm thick (7Ply) commerical BWR grade ISI Mark IS:303 / IS:710 Make of ply Kit Ply/Green ply/Century shape and size, as per drg and directed by Engr-in-charge. |
| 73 | S&F in replacement of unserviceable long rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg or as directed by Engr-in-Charge. |
| 74 | S&F in replacement of unserviceable short rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge. |
| 75 | Removal of old unsv head board and S&F new head board rest outer ply to be replaced by 3 mm thick ply wood one side teak faced and inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg and as directed by Engr-In-Cahrge. |
| 76 | Dismantling of unserviceable Foot board of Bed ply top, S&F new foot rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS secres and as per drg and as directed by Engr-in-Charge |
| 77 | S&F of first class hard wood (teak) corner 100mmx100x25mm bracket be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge. |
| 78 | Removal of old unsv stiffner from Bed Hard and S&F new stiffenr of 2nd class hard wood shape and size as per drwg. |
| 79 | CHAIR DINING CB Drg No FD 228/279 :- S & F for removing the following existing broken or unserviceable components of wooden furniture items from Chair dining CB and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge :Front Leg |
| 80 | Rear Leg |
| 81 | Front Rail |
| 82 | Rear Rail |
| 83 | CHAIR EASY Drg No FD-229 :-S & F for removing the following existing broken or unserviceable components of wooden furniture items from Chair Easy and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge :Front Leg |
| 84 | Rear Leg |
| 85 | Side Rail of Seat |
| 86 | Front Rail of seat |
| 87 | Back Rail of seat |
| 88 | Side Rail of Back |
| 89 | Arm Rest |
| 90 | Stiffner |
| 91 | CHAIR WRITING Drg No FD-280 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Chair writing and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg and duly polished , all as specified and as directed by Engineer-in-Charge :Front Leg |
| 92 | Rear Leg |
| 93 | Side Rail |
| 94 | Front Rail |
| 95 | Back Rail |
| 96 | CHAIR DINING OFFICER Drg No FD/MAP-II/04 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Chair Dining Offr and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge :Front Leg |
| 97 | Rear leg |
| 98 | Side Rail |
| 99 | Back Rail |
| 100 | Front Rail |
| 101 | PU Foam of seat of 75mm Thick density 40 duly covered with superior quality Tepastry Cloth (rate not less then 250/- per meter) shape and size as per drwg. |
| 102 | 12mm thick plywood commerical BWR grade and 4 nos of corners for seat fixed with suitable screw, shape and size as per drwg. |
| 103 | CHAIR COMPUTER (MAP) - (FD/E6/MAP/01) :-Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC seat cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS 250/- per mtr) |
| 104 | Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC back cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of back seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS 250/- per mtr) |
| 105 | Removing of old unsv Hydraulic System and S&F New Hydraulic System superior quality complete all as per drg and directed by Engr-in-charge |
| 106 | Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge |
| 107 | Removing of old unsv Caster Wheel and S&F New Caster Wheel made of superior Quality complete all as per drg and directed by Engr-in-charge |
| 108 | Removing of old unsv Pedestral Assembly complete with caster wheel and S&F New Metalic Pedestral Assembly complete with castor wheel complete all as per drg and directed by Engr-in-Charge |
| 109 | PEG TABLE (FD-277/236/384) :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Peg Table and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Leg |
| 110 | Long Rail |
| 111 | Stiffner |
| 112 | Short Rail |
| 113 | Removing of old unsv top from Peg table and S&F new top made of 18mm HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 114 | TABLE CENTRE (Drg No 235/274) :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table Centre and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Leg |
| 115 | Long Rail |
| 116 | Long stiffner |
| 117 | Short stiffner |
| 118 | Removing of old unsv top from table Centre and S&F new top made of 18mm HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 119 | TEAPOY :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Teapoy and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Leg |
| 120 | Long Rail |
| 121 | Long stiffner |
| 122 | Removing of old unsv top from teapoy and S&F new top made of 18mm HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 123 | TABLE 900 x 600mm WITH/WITHOUT DRAWER Drg No FD-283 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table 900x600mm and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Top of table made out of 18mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive. |
| 124 | Long Rail |
| 125 | Short Rail |
| 126 | Long stiffner |
| 127 | Short stiffner |
| 128 | TABLE DINING 6/8 PERSON Drg No FD-273/376/FD/MAP-II/03/04 :- M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table dining 6/8 person and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : Top of table dining 6/8 pers made out of 18mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive. |
| 129 | Long Rail for Table dining 6 pers |
| 130 | Long Rail for Table dining 8 pers |
| 131 | Short Rail |
| 132 | TABLE WRITING Drg No FD-275 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table writing and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge : |
| 133 | Removing of all unsv Door of Table and S&F New Door made of 18/19mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly PVC beading of 2mm on both sides with Suitable Adhesive complete and piano type hinges complete all as specified on drg and as directed by Engr-in-Charge. |
| 134 | Removing of old unsv Drawer and S&F New Drawer complete all as per drawing and Drawer Lock (Harrisson/Link) directed by Engr-in-Charge |
| 135 | Long Rail |
| 136 | Short Rail |
| 137 | Long leg |
| 138 | Small leg |
| 139 | TABLE COMPUTER Drg No FD/E6/MAP/03 :-Removing of old unsv table top of Table Computer and S&F new top of Table Computer made of 18/19mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 140 | Removing of old unsv Key Board all around PVC biddding with telescopic Channel and S&F new Key Board made out of 18mm thick HDHMR Make - Century, Greenply, Kitply, Archidply, (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 141 | Removing of old unsv Knob and S&F new Knob complete all as per Drawing and Directed by Engr-in-Charge |
| 142 | Removing of old unsv leg frame with leg and Nylon Buffer and S&F new leg frame made out of 25x50mm rectangle MS pipe with leg and Nylon Buffer complete all as per Drawing and Directed by Engr-in-Carge |
| 143 | Removing of old unsv drawer complete and S&F new drawer complete with telescopic channel shape and size as per drg. |
| 144 | Removing of old unsv and rusty side frame and S&F new Side Frame made out of 25mm square MS pipe,18 gauge shape and size as per drg. |
| 145 | Removing of old unsv partical board from side frame and S&F new 18mm thick HDHMR (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 146 | Removing of old unsv mouse tray and S&F new mouse tray with telescopic channel shape and size as per drg. |
| 147 | Removing of old unsv lower frame 25mm square MS pipe and S&F new lower frame made out of 25mm square MS pipe shape and size as per drg. |
| 148 | Removing of old unsv bottom shelf and S&F new bottom shelf made out of 18mm thick HDHMR (High Density high resistance moist fibreboard) board both side laminated approved shade duly post-formed (PFT) with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. |
| 149 | Removing of old unsv top frame from table computer and S&F new frame made out of 25mm MS square pipe 18 gauge shape and size as per drg. |
| 150 | TABLE DRESSING LADIES (FD-251, FD/Map-II/07) :-Removing of old unsv 6mm ply from Mirror table dressing ladies and S&F new 6mm thick commercial plywood BWR grader on back of mirror frame all as specified and shown on drawing and directed by GE/Engr-in-charge. |
| 151 | Removing of old unsv 6mm thick commercial plywood from back of table dressing box and S&F new 6mm thick commercial plywood BWR grade from back of table dressing box all as specified and shown on drawing and directed by GE/Engr-in-charge. |
| 152 | Removing of broken/unsv looking mirror from table dressing ladies and S&F new looking mirror 5.5 mm thick all as specified and shown on drawing and directed by GE/Engr-in-charge. |
| 153 | Removing of old unsv drawer and S&F new drawer (with telescopic channel) made to shape and size as per drg. |
| 154 | Removing of old/broken stool from table dressing ladies (Map) and S&F new stool complete (foam covered with upholstery and castor wheel) all as specifed shown in drg. |
| 155 | SOFA SET 5 SEATER (3 Pcs) Drg No FD 373/281 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table dining 6/8 person and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge :Rear Leg |
| 156 | Front Leg |
| 157 | Side Rail |
| 158 | Arms Rest |
| 159 | Removal of old unsv foam cushion from Sofa Set 5 Seater and S&F new Foam Cusion 21' x 22' x 4' thick, 40 density duly covered with tapestry cloth of approved quality/shade. The Cost of tapestry cloth shall not be less than Rs 250/- per meter. All as specified and shown on drawing and as directed by Engr-in-Charge. (Note:- is one quanitity) |
| 160 | RECANING OF ALL TYPES OF CHAIR (CHAIR EASY, CHAIR DINING, CHAIR WRITING, STOOL DRESSING ) Taking out existing worn out/unserviceable cane from Chair Easy, Chair Dining ,Chair Writing & Stool Dressing and recaning the same with half round 2.002/2.5mm wide 0.4mm thik white plastic cane as per Godrej pattern all as specified and shown on drawing and as directed by Engr-in-Charge |
| 161 | Supply and fixing ONYX stone slab of approved shade and and pattern, machine cut, mirror polished finish, 18-20 mm thick, fixed over existing table/ Counter/ Furniture top including necessary cutting, edge, polishing rounding of edges, grooves if required, adhesive fixing with epoxy/stone adhesive backing with 12 mm BWP plywood wherever required,including all handling, carriage, fitting and making good disturbed surfaces complete all as specified and directed by Enginner -in - Charge. Notes to include in item descripton : (a) Stone shall be natural ONYX stone of approved colour and pattern. (b) Slab shall be free from cracks, cavities and visible joints. (c) Edge to be machine polished with 3-5 mm chamfer/rounding. (d) Jointing if required shall be done with colour matched epoxy compund, (e) Contractor shall produce sample slab for approval before procurement. |
| 162 | Supply & Fixing of Sunmica, with Removing of old Sunmica. Taking down existing sunmica / Laminate from Wooden surface such as cupboard shutters, tables, shelves. Removing and celaning the surface complete. Supply and Fixing 1.25 mm thick decorative laminate Sunmica of approved make and shade on wooden surfaces including application of synthetic resin adhesive, pressing, trimming edges and finishing complete. all as specified and shown on drawing and as directed by Engr-in -charge. Make -Greenlam Laminates, Century Laminates, Merino Laminates. |
| 163 | M & L for polishing the wooden furniture with two coat of lacquer polish after removing the old polish with grinder machine, preparation the surface smooth with applying putty filling cracks & joint with putty, raw shina (pilli mitti) scraping the surface with abrasive emery paper. colour of polish as directed by Engineer-in-Charge rest all as per drg (including polishing at site) Bed Hard Ply Top. |
| 164 | Chair Dining CB |
| 165 | Chair Dining Offrs (MAP) |
| 166 | Chair Easy CB |
| 167 | Chair Writing CB |
| 168 | Hat Stand |
| 169 | Peg Table |
| 170 | Sofa 5 Seater Complete |
| 171 | Sofa single seater |
| 172 | Stool Dressing CB |
| 173 | Stool Dressing MAP |
| 174 | Teapoy Wooden |
| 175 | Table Centre |
| 176 | Table 3 x 2 with/without Drawer |
| 177 | Table Dining 6 Person |
| 178 | Table Dining 8 Person |
| 179 | Table Writing |
| 180 | Table Dressing Ladies |
| 181 | Table Dressing Gents Please Enable Macros to View BoQ information |
