|
| 1 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 2 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 3 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. . |
| 4 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 5 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, as per architectural drawings, complete all as specified and directed. |
| 6 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement, frosted glass of 5mm thick etc., complete all as specified and directed. |
| 7 | S & F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed. |
| 8 | S & F 150 mm size extruded aluminium handles fabricated type, anodised, complete all as specified and directed. |
| 9 | S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and directed. |
| 10 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 and including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc., complete all as specified and directed. |
| 11 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 12 | M & L for rendering 15mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 13 | M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and directed. |
| 15 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth/even surface using sand paper and applying two coats of oil bound dismater over a coat of primer, complete all as specified and directed. |
| 16 | S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including dismantling old wrought iron or mild steel work of any description, complete all as specified and directed. |
| 17 | M&L for coloured glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm / 200x 300x 7mm thick, best quality as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement motor 1:4, including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 18 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all specified and directed. |
| 19 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls incl Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 20 | S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls incl Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 21 | S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 22 | S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 23 | S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc., complete all as specified and directed. |
| 24 | S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exceeding 250 litres and not exceedind 500 litres capacity etc., complete all as specified and directed. |
| 25 | Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed. |
| 26 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 27 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 28 | M&L wrought Second class hard-wood in scantlings frame work including dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work, complete all as specified and directed. |
| 29 | S& F in repair PVC floor trap, 75mm dia, plain with grating including jointing with solvent cement to waste pipe, complete all as specified and directed. |
| 30 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern) and CP health facet , connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc., complete all as specified and directed. |
| 31 | S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc., complete all as specified and directed. |
| 32 | S&F in repair PVC valveless 10 litres syphonic action type, flushing cistern, low level, whit with inlet, ball valve, float and handle including brackets, complete all as specified and directed |
| 33 | S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 34 | S&F in repairs vitreous china wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement, complete all as specified and directed. |
| 35 | S&F in repairs brass chromium plated Tubular towel rail 20mm dia, complete all as specified and directed. |
| 36 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 37 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 38 | M/L 40mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) over 75mm thick plain cement concrete 1:3:6 type C-1 (using 40mm graded crushed stone aggregate) , as in plinth protection/PCC path and paving, laid in panels of area not exceeding 2.00 sqm with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement, complete all specified and as directed. |
| 39 | Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished , and reforming benching as required, complete all as specified and directed |
| 40 | S&F 150mm bore of pipe reinforced concrete pices class Np-2 laid jointed complete with collers, complete all as specified and directed |
| 41 | M&L for plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed |
| 42 | S&F GI tubing, 15mm bore, medium grade with all fitting and fixed to wall and ceiling and including taking up or down 15mm bore dia, steel tubing and connections including cleaning for refining or removal to store, complete all as specified and directed |
| 43 | S&F GI tubing, 20mm bore, medium grade with all fitting and fixed to wall and ceiling and including taking up or down 15mm bore dia, steel tubing and connections including cleaning for refining or removal to store, complete all as specified and directed |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed |
| 45 | M&L for plain cement concrete (1:3:6) type C-1, using 40 mm graded crushed stone aggregate, 75mm thick, as in sub base of path complete all as specified and directed. |
| 46 | M&L for 15mm thick scred bed or bedding later for laying floor finishes in cement mortar 1 :4, complete all as specified and directed. |
| 47 | M&L coloured chequered cement concrete tiles of Size 30cm x 30cm x 20mm thickness set , jointed in neat cement slurry and pointed with grey cement and pigment, complete all as specified and directed. |
| 48 | M & L for plain cement concrete Type B-1 1:2:4 (using 20mm gradedcrushed stone aggregate) as in coping, benching, flooring etc, complete all as specified and directed. |
| 49 | M & L for SFRC Cover 1000x1000mm including angle iron cornering of 75x75x6mm thick, complete all as specified and directed. |
| 50 | M & L for cleaning of manholes ( including taking away sullage and disposal out of MOD land, clearing of vegetation, making manhole serviceable and checking of sewage flow from the manhole to manhole), complete all as specified and directed. |
| 51 | M & L for 15mm thick second class hardwood boarding as in ceiling planed one sided with butt joints and fixed with nails beading fillets cornices etc & two coat of synthetic enamel painting over a coat of pink primer including dismantling of old boarding complete all as specified and directed. |
| 52 | Notes :-An amount of Rs. 63,730.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
