|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair /Maint to LT Network system in 1 FOD adm area, depot area, mand and other locations under GE (Utilities) Udhampur Contract No: GE/U-34/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 mtr depth for laying of underground cable, erection of poles etc. and getting out in soft/loose soil including separating serviceable bricks for re-use at site obtained during excavation complete all as specified and directed by Engineer-in Charge. |
| 3 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 4 | Description all as per Ser item No 2.00 here-in-before, but exc. 1.50 metre depth and not exc. 3.00 metre deep |
| 5 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc. 25 cm in soils complete all as specified and directed by Engineer-in-Charge. |
| 6 | Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour Bricks, dry, well brunt bricks laid in trenches for cable protection complete all as specified and directed by Engineer-in -Charge. |
| 8 | M&L for sand filling in trenches for cushioning of cable complete all as specified and directed by Engineer-in -Charge. |
| 9 | Supply and laying of round boulders of gauge 63 mm graded as in bedding layer around electrical equipment or installation ,LT Panel etc complete all as specified and directed by Engineer-in -Charge. |
| 10 | M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 16 to 25 Sqmm complete all as specified and directed by Engineer-in- Charge |
| 11 | M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 35 to 50 Sqmm complete all as specified and directed by Engineer-in -Charge |
| 12 | M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 70 to 150 Sqmm size, complete all as specified and directed by Engineer-in-Charge. |
| 13 | M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 150 to 240 Sqmm size, complete all as specified and directed by Engineer-in- Charge. |
| 14 | M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 300 to 400 Sqmm size, complete all as specified and directed by Engineer-in- Charge |
| 15 | Supply and Spray of total vegetation control Non-selective, systemic herbicide with residual soil sterilant properties designed for permanent or long-term removal of vegetation from non-crop areas including gravel pathways, driveways, fence lines, OH Lines etc. Controls existing vegetation and prevents regrowth for up to 12 months as per guidelines for industrial vegetation complete all as specified and directed by Engineer-in Charge.Notes: (i) Do not apply over the root zones of desirable trees or plants. (ii) Adding water in the chemical will not be deemed in the quoted rates, pure herbicide liquor will be treated as per litre. |
| 16 | M&L for disconnecting LT supply and taking out defective LT draw out EDO type ACB 440 V 800Amp / 630Amp and servicing by OEM .i.e Auth dealer cleaning the fixed and moving all parts, removing dust particles by using high speed blower applying grease/jelly to moving mechanism and moving parts, tightening nut bolts of all the components of ACB and complete testing and putting on full load complete all as specified and directed by Engineer-in -Charge. |
| 17 | S&F in replacement of isolating JAW contacts suitable for 800Amp / 630Amp LT draw out EDO type ACB complete all as specified and directed by Engineer-in -Charge. |
| 18 | S&F in replacement of polyester resin cast CT 800 / 5A suitable for 800Amp /630Amp LT draw out EDO type ACB as per existing make and model complete all as specified and directed by Engineer-in -Charge at site. |
| 19 | S&F in replacement of ARC Chutes for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-in -Charge at site. |
| 20 | S&F in replacement of Pole Unit for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-in- Charge at site |
| 21 | S&F in replacement of Draw out terminals for Air circuit brekers EDO type suitable for 800/630 Amp as per existing make and model ccomplete all as specified and directed by Engineer-in -Charge at site. |
| 22 | S&F in replacement of Lower terminals for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-in- Charge. |
| 23 | S&F in replacement of Upper terminals for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-inCharge at site |
| 24 | S&F in replacement of Charging motor for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and modelcomplete all as specified and directed by Engineer-in- Charge at site. |
| 25 | S&F in replacement of shunt trip and closing coil for Air circuit brekers EDO type suitable for 800Amp/630Amp complete all as specified and directed by Engineer-in- Charge. |
| 26 | S&F in replacement of manual Charging handle for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-in -Charge at site. |
| 27 | S&F in replacement of under voltage trip device compact with UVT coil for Air circuit brekers EDO type suitable for 800Amp/ 630Amp as per existing make and model complete all as specified and directed by Engineer-in -Charge at site. |
| 28 | S&F in replacement of Safety shutter assembly for Air circuit brekers EDO type suitable for 800Amp/630Amp as per existing make and model complete all as specified and directed by Engineer-in -Charge at site. |
| 29 | S&F in replacement of Earth fault relay with NCT for Air circuit brekers EDO type suitable for 800/630 Amp as per existing make and model complete all as specified and directed by Engineer-in -Charge at site |
| 30 | Disconnecting & taking out the existing Unserviceable MCCB from panel and S&F new MCCB 63 amp, 25 KA breaking cap of suitable frame size, 4 Pole, 415 V, 50 Hz, 3 phase including extension terminals and connecting using suitable fasteners, modification/fabrication if any complete all as specified and directed by Engineer-in- Charge. |
| 31 | Description all as per Ser Item No 29.00 here-in-before, but of size 100 amp, 25 KA |
| 32 | Description all as per Ser Item No 29.00 here-in-before, but of size 125 amp, 25 KA |
| 33 | Description all as per Ser Item No 29.00 here-in-before, but of size 160 amp, 25 KA |
| 34 | Description all as per Ser Item No 29.00 here-in-before, but of size 200 amp, 35/36 KA |
| 35 | Description all as per Ser Item No 29.00 here-in-before, but of size 250 amp, 35/36 KA |
| 36 | Description all as per Ser Item No 29.00 here-in-before, but of size 320 amp, 35/36 KA |
| 37 | Description all as per Ser Item No 29.00 here-in-before, but of size 400 amp, 35/36 KA |
| 38 | Description all as per Ser Item No 29.00 here-in-before, but of size 630 amp, 50 KA |
| 39 | M&L for spray painting to LT panel board complete from inner and outer side with one coat of synthetic enamel high glow paint Ist grade including preparation/cleaning of steel surfaces and welding work as required complete all as specified and directed including disconnection of supply from main complete all as specified and directed by Engineer-in Charge. (approximate 8 sq mtr of each panel board ) |
| 40 | M & L for welding of Panel door inner and outer and MCCB doors from front and back with necessary hinges & locking arrangements including properly disconnection of old unserviceable parts, MS sheet and angle irom complete & locking arrangements including replacement of followings, complete all as specified and directed by Engineer-in- Charge. (Note MS Sheet and angle iron will be measured and paid separated. |
| 41 | Supply and fix in replacement of MS sheet duly powder coated for enclosing the feeder pillar box of any size inclding taking down old rusted MS sheet complete all as specified and directed by Engineer-in -Charge. |
| 42 | Supply and fix in replacement of MS Angle irom of size 50x50x50x6 and 40x40x6 mm sheet duly painted for bracing the sheet and also give the structure for the feeder of any size inclding taking down old rusted MS angle complete all as specified and directed by Engineer-in- Charge. |
| 43 | Supply and fixing of busbar in repair for giving common output including taking down old U/S busbars from panel of alluminium strap suitable for LT suppy 415 volts , 4 winding system including making necessary cable connection for making hole in busbar complete all as specified and directed by Engineer-in- Charge. |
| 44 | Supply and fixing of busbar in repair for giving common output including taking down old U/S busbars from panel of copper strap suitable for LT suppy 415 volts , 4 winding system including making necessary cable connection for making hole in busbar complete all as specified and directed by Engineer-in- Charge. |
| 45 | Supply and fix in repair busbar insulator to insulating the bar from pillar box suitable for 415 volts AC supply insulation complete all as specified and directed by Engineer-in -Charge. |
| 46 | Supply and fix in replcement battery bank of capacity 110 V, consisting of (09 Nos) of 12 Volts Each 150 AH maintenance free \\"exide\\" make for system voltage 110 V, including disconnection of old U/S Battery bank complete all as specified and directed by Engineer-in -Charge. |
| 47 | M & L for replacement of Door Hinges of various capacity of panel including taking down the old door hinges complete all as specified and directed by Engineer-in- Charge. |
| 48 | S&F On load Change over switch open execution type 100 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in -Charge. |
| 49 | S&F On load Change over switch open execution type 125 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in- Charge. |
| 50 | S&F On load Change over switch open execution type 200 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in- Charge. |
| 51 | S&F On load Change over switch open execution type 250 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in- Charge. |
| 52 | S&F On load Change over switch open execution type 320 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in Charge. |
| 53 | S&F On load Change over switch open execution type 400 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in- Charge. |
| 54 | S&F On load Change over switch open execution type 630 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in -Charge. |
| 55 | S&F On load Change over switch open execution type 800 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in -Charge. |
| 56 | S&F On load Change over switch open execution type 1000 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in -Charge. |
| 57 | Taking down/dismantling of any capacity of electrical quipments by using Hydra mechine/suitable crane complete and including necessary disconnection of undergound/OH Line from the electrical equipments by taking proper electrical shut down and placed the electrical equipment on the safer places for repairing of transformer plints/fence/surrounding area and earthing with proper caring and complete all as specified and directed by Engineer-in -Charge. Any damage to electrical equipment during disconnection and handling will be repaired by the contractor without any extra payment . |
| 58 | Shifting/Refixing back of any capacity of electrical quipments by using Hydra mechine/suitable crane complete and including necessary connection of undergound/OH Line from the electrical equipments by taking proper electrical shut down and placed the electrical equipment on the transformer plinth for after necessry repairing of transformer plints/fence/surrounding area and earthing with proper caring and complete all as specified and directed by Engineer-in- Charge.Any damage to electrical equipment during connection and handling will be borned by the contractor without any extra payment . |
| 59 | Material an lobour for providing un-interupted power supply to the users during maintenance of transformer plinth, fence and surrounding area by providing arrangement of standby transformer with LT Panel of suitable capacity alongwith LT UG Cables with complete necessary electrical connection complete all as specified and directed by Engineer-in -Charge. |
| 60 | Disconnecting electric connection from transformer and excavation incomming and outgoing cables and shifting a site . Dismantling damaged PCC platform and make good distrubed area as per existing area including m&L for making new platform of transformer and refixing and reshifting the transformer at same location after necessary repair, including connection of incoming and outgoing cables , removing PCC platform material from site and depositing at places complete all as specified and directed by Engineer-in -Charge. |
| 61 | M&L for scraping, cleaning and preparation of old white wash and damage PCC plaster surfaces of transformer plinth complete and M&L for plastering 15 mm thick in CM 1:6 on top and around transformer plinth including two coats of colour wash over one coat of white wash complete all as specified and directed by Engineer-in- Charge. |
| 62 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc, but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in- Charge. |
| 63 | Material & labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in- Charge. |
| 64 | Material & labour for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engineer-in- Charge. |
| 65 | Cutting of worn out alluminium cable terminal lugs from the transformer cable, crimping of new aluminium cables core , with suitable size of lugs and fixing with transformer, terminal stud including nd providing cables sleeve of size 16 to 50 Sqmm and as directed by Engr-in-Charge. Note : Cost of cables sleeves are deemed to be included in the quoted rates as complete all as specified and directed by Engineer-in- Charge. |
| 66 | Cutting of worn out alluminium cable terminal lugs from the transformer cable, crimping of new aluminium cables core , with suitable size of lugs and fixing with transformer, terminal stud including nd providing cables sleeve of size 16 to 50 Sqmm and as directed by Engr-in-Charge. Note : Cost of cables sleeves are deemed to be included in the quoted rates complete all as specified and directed by Engineer-in -Charge. |
| 67 | Cutting of worn out alluminium cable terminal lugs from the transformer cable, crimping of new aluminium cables core , with suitable size of lugs and fixing with transformer, terminal stud including nd providing cables sleeve of size 70 to 150 Sqmm and as directed by Engr-in-Charge. Note : Cost of cables sleeves are deemed to be included in the quoted rates complete all as specified and directed by Engineer-in -Charge. |
| 68 | Cutting of worn out alluminium cable terminal lugs from the transformer cable, crimping of new aluminium cables core , with suitable size of lugs and fixing with transformer, terminal stud including nd providing cables sleeve of size 240 to 400 Sqmm and as directed by Engr-in-Charge. Note : Cost of cables sleeves are deemed to be included in the quoted rates complete all as specified and directed by Engineer-in- Charge. |
| 69 | Tightening and straightening of any type/size/span overhead line of ACSR conductor/GI wire of any size and span by disconnecting and removing from insulators and tightening the conductor by using rope, chain pulley block etc and binding the conductor on insulators with and including binding wire and jumpers of ACSR complete all as specified and directed by Engineer-in -Charge.(Note : 04 run of ACSR conductor and one run of GI Earth wire of the lenth upto 40 to 50 RM will be measured one span and paid separately |
| 70 | Scrapping , cleaning and preparation of old surfaces of steel tubular pole of any type. size , height, swan neck type (9 mtr long) steel fitting including brackets, clamps, nuts bolts, washer etc complete and M&L for painting with two coat for aluminium paint after preparation of the steel surfaces and complete all as specified and directed by Engineer-in -Charge. |
| 71 | Mateial and labour for applied strap with two coats black and white paint in strap alternatevely all round the poles from the bottom of the pole for indication of the poles. Height of the strap shall be 30 cm and number of strap shall be 05 Nos complete all as specified and directed by Engineer-in- Charge. |
| 72 | Material and labour for writing pole No with sub stn No on pole with applied two coat of black paint and writing the pole No and Sub Stn No with white luminaire paint of letter size 75 mm complete all as specified and directed by Engineer-in- Charge. |
| 73 | Dismantling of existing ACSR (any size) conductor from overhead line and setting aside (serviceable portion) for re-use in the work and removing unserviceable materials from site of work complete all as specified and directed by Engineer-in- Charge. |
| 74 | M & L for Aluminium conductor steel reinforced as in overhead electric line and stretching the same with required span sag and binding the conductor with pin/shackle insulator and jumpers with aluminium binding wire not less than 2.00mm dia, PG clamp etc complete all as specified and directed by Engineer-in- Charge. |
| 75 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and supply, lay and fix aerial bunched cable 1.1KV grade stranded and compact aluminium phase conductor of size 4x25sqmm + 1x16 sqmm (bare messenger) with Aluminium alloy and Junction box The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc. complete all as specified and directed by Engineer-in- Charge. Note :- Retrived conductor scrap ( Lumpsum ) shall be deposited AGE E/M storeyard with own arrangement by the contractor in- |
| 76 | S&F in replacement of automatic street light control switch of 3 KW single phase(20 Amp per phase) having protection IP-66 using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitable rating power contractor (s), one Incoming and three Outgoing MCBs rating of 20 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection including necessary fixing arrangement on pole and wall like clamp , nuts and bolts of suitable size as per IS code . The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed by Engineer-in- Charge.Make - Navdeep with smart timer Model no -Navdeep-66-3kw 1P. or equivalent from the list of make given in particular sepecifivation |
| 77 | Dismantling of old UNSV damage/rusted PCC pole/steel tubular poles of any size necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed by Engineer-in- Charge. |
| 78 | Supply and fixing of steel tubular swaged poles errected vertically with two coat of aluminium paint ovar a coat of red oxide zinc chrome prime in externally exposed to view portion and black bituminous painting to intenal surface and portion embeded in concrete incl making five alternative strips 30 cm wide in different colour above ground level or plinth level incl marking of MES pole No in black paint complete with cast iron base plate, final tapper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 mtr long) and complete all as specified and directed by Engineer-in- Charge. |
| 79 | M & L for PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in- Charge. |
| 80 | M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in- Charge. |
| 81 | M & L for PCC 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed by Engineer-in- Charge. |
| 82 | Dismantling of cross arms fixed on steel tubular poles carefully and removing from site complete all as specified and directed by Engineer-in- Charge. |
| 83 | M & L for Cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed by Engineer-in- Charge. |
| 84 | M &L for demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer-in- Charge. |
| 85 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates for filling in road cuts/hard standing etc complete all as specified and directed by Engineer-in- Charge. |
| 86 | S&F double walled corrugated (DWC) pipe of size 40 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in- Charge. |
| 87 | S&F double walled corrugated (DWC) pipe of size 63mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in- Charge. |
| 88 | S&F double walled corrugated (DWC) pipe of size 50 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in- Charge. |
| 89 | Taking up old serviceable/unserviceable UG cable from trench/pcc/interlocking/tiles including disconnection disconection from electrical equipment for replacement , repair and re-laying or re-routing of size including make good the distrubed surface as per existing, complete all as specified and directed by Engineer-in- Charge:- (Earth work shall be measured and paid separately under appropriate items of Sch-'A') |
| 90 | 16 Sqmm 3.5 Core to 35 Sqmm 3.5 Core |
| 91 | 50 Sqmm 3.5 Core to 70 Sqmm 3.5 Core |
| 92 | Supply & lay test and commissiong of LT Cable XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) with aluminium conductor , 1100 volts earthed grade cross sectional area as illustrated below, complete all as specified and directed by Engineer-in- Charge. Note : Excavation, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately). |
| 93 | 16 sqmm 4 core |
| 94 | 25 sqmm 3.5 core |
| 95 | 35 sqmm 3.5core |
| 96 | 50 Sqmm 3.5 core |
| 97 | 70 Sqmm 3.5 core |
| 98 | Supply and fixing or laying galvanized steel tubing medium grade (ISI) marked for protection of under ground cable of size 50 mm bore, complete all as specified and directed by Engineer-in- Charge. |
| 99 | Supply and fixing or laying galvanized steel tubing medium grade (ISI) marked for protection of under ground cable of size 40 mm bore, complete all as specified and directed by Engineer-in- Charge. |
| 100 | M&L for cutting/boring the existing bitumen us road/payment/footpath upto 0.75 mtr in depth, 0.45 mtr in width and getting out excavated material and making good the damaged portion after laying the pipe, returning filling in mass concrete PCC 1:2:4 type B2 upto top of the road complete all as specified and directed by Engineer-in- Charge.Note :-(i) M&L for laying of pipe shall be measured and paid separately. |
| 101 | Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion, complete all as specified and directed by Engineer-in- Charge. (Concrete pit shall be 20 cm to 30 cm away from main pit). |
| 102 | Earthing complete with GI steel earth plate electrode 60cm x 60cmx6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI iron or steel earth wire 4mm dia (8 SWG) by means of nuts, volts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Part-I and testing after completion, complete all as specified and directed by Engineer-in- Charge. |
| 103 | Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 25x 4 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion, complete all as specified and directed by Engineer-in- Charge. (Concrete pit shall be 20 cm to 30 cm away from main pit). |
| 104 | Supply and fix earth pit chamber board of 3.15 mm thick mild steel sheet sheet of size min 45cmx30cm fixed with 12 mm thick MS rod two nos upto 90 cm height by nuts/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letter min 6 cm height i.e Earth pit No . Location Earthing test value and date and other letters complete all as specified and directed by Engineer-in- Charge. |
| 105 | Supply and fix in repair Earth continuity conductor or main earthing lead fixed to wal on batten or recess or chasses or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation of 25x4 mm galvanised iron strip, complete all as specified and directed by Engineer-in- Charge. |
| 106 | Supply and fix in repair Earth continuity conductor or main earthing lead fixed to wal on batten or recess or chasses or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation of 32x6 mm galvanised iron strip, complete all as specified and directed by Engineer-in- Charge. |
| 107 | Supply and fix in repair Earth continuity conductor or main earthing lead fixed to wal on batten or recess or chasses or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation of earthing lead of 4 mm dia galvanised, complete all as specified and directed by Engineer-in- Charge. |
| 108 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT Junction box (KIOSK) out door type, pole mounted,compertmantalised of size 600mmx450mmx200mm suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of PVC sheet with Bus bar electrolytic grade Copper 400 Amps and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 600 Amp,4 pole spadles to fitted complete with clamp of size 50x50x6 mm with nut and bolts having front openeable hinged with aprons for cable entry including PVC cable glands and locking arrangement complete all as specified and directed by Engineer-in- Charge. |
| 109 | Supply and fixing non transparent looping SMC kiosks pole box 3 phase of size 310×210×120 mm made out of engineering plastic one piece moulding siemens gray colour with hold fast including 4 Nos aluminium strips 60 amp of requird size fixed on unbrakable insulator and one no single pole MCB 1 to 3 amp 'C' curve including taking out of old unserviceable one, complete all as specified and directed by Engineer-in- Charge. |
| 110 | S & F PVC insulated and sheathed 2.5 sq mm Three core multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all as specified and directed by Engineer-in- Charge. |
| 111 | Supply and fixing in replacement GI bracket 40 mm dia 1.5 Mtr long light grade made to shape including taking down old and u/s existing fitting complete all as specified and directed by Engineer-in- Charge. |
| 112 | Supply and fixing of scotch 70 self fusing silicone rubber tape arc and track resistance self fusing 25 mm widex 30 meter long, complete all as specified and directed by Engineer-in- Charge. |
| 113 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings MCCBs are to busbar spadles to fitted complete base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following, complete all as specified and directed by Engineer-in-Charge:- Incoming(a) MCCB 160 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 No, |
| 114 | Outgoing (a) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 240 Amp,4 pole, not less than 75 cm long mounted on insulators 01 setNote- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level(iii) Outgoing MCCBs shall be fed with solid busbar connectors and (iii) Cables shall be terminated using gun metal /SS glands.(vi) including suitable thimbles/lugs, nut bolts ,washers fitted the cables(v) cable glands for incoming and out going suitable cables is including rate quated by vendover |
| 115 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15 mm CRCA MS sheet with Bus bar electrolytic grade Copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 600 Amp,4 pole spadles to fitted complete base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged with aprons for cable entry and locking arrangement complete all as specified and directed by Engineer-in-Charge. Make- Simens/ABB/Schneider |
| 116 | Supply, install, 150 amp copper Bus bar with enclouser wall mounted size 350 mmX300 mmX150mm ,suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 2 mm CRCA MS sheet for cable entry and locking arrangement complete complete all as specified and directed by Engineer-in-Charge. |
| 117 | Labour only for cutting/pruning the overhanging or adjacent branches of trees of any girth HT/LT overhead line including cutting the bamboos, removing the shrub from poles and cleaning the jungle below and upto 3.00 metre clear distance from the middle conductor of the line on either Side complete and removing rubbishes from Site complete all as specified and directed by Engineer-in-Charge. Note : (1) pole to pole distance from 40 to 60 mtrs will be measured as one span. (2) All the precautionary equipment like safety belt, earth road, hand gloves, ladder, and T&P shall be provided by the contractor. (3) The tree pruning will be start within 15 days of commencement of works, If he fails to attend the tree prunning complain the penalty of Rs. 2000 per span will be charged and deducted from the next due RAR. |
| 118 | Supply and fixing in replacement spreader terminal kits comprising of 04 Nos terminal for 4 pole mccb to increase the terminal pitch, ensure securing, reliale electrical connection and better phase seperation for larger cables of size 63 A to 160 Amps, complete all as specified and directed by Engineer-in-Charge. |
| 119 | Supply and fixing in replacement spreader terminal kits comprising of 04 Nos terminal for 4 pole mccb to increase the terminal pitch, ensure securing, reliale electrical connection and better phase seperation for larger cables of size 160 A to 250 Amps, complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply and fixing in replacement spreader terminal kits comprising of 04 Nos terminal for 4 pole mccb to increase the terminal pitch, ensure securing, reliale electrical connection and better phase seperation for larger cables of size 320 A to 400 Amps, complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and fixing in replacement spreader terminal kits comprising of 04 Nos terminal for 4 pole mccb to increase the terminal pitch, ensure securing, reliale electrical connection and better phase seperation for larger cables of size 400 A to 800 Amps, complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
