|
| 1 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 2 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 3 | Dismantling G.I. Sheets roofing including ridges hips valleys and gutters etc. and stacking the material within 50 meters lead. |
| 4 | Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:;Ordinary soil |
| 5 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 6 | Providing and laying in position cement concrete 1: 2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shutteringand finishing :;All works upto plinth level |
| 7 | Precast plain cement chequered tiles 22 mm thick of required shades laid in floors treads of steps and landing on 20 mm thick bed of Cement mortar 1:4 (1cement : 4 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete.;Medium shade using pigment with 50% white cement 50% Grey cement |
| 8 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in -charge: windows with two sliding shutters using 18 mm series shutters section.; Plain glass |
| 9 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 10 | Steel work in single sections (SAIL TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting hoisting fixing in position and applying a priming coat of red lead paint.;In R.S. joists channels angles tees |
| 11 | Steel work in single sections (SAIL TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting hoisting fixing in position and applying a priming coat of red lead paint.;In flats of all sizes |
| 12 | Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. |
| 13 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins rafters trussesflashings etc. complete as per the directions of the Engineer in charge. |
| 14 | Add for providing & fixing Flashings -[Corners Ridges valleys gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 15 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 16 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.;Plain grill |
| 17 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete includingdisposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand) |
| 18 | Removing white or colour wash by scrapping sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 19 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 20 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. Please Enable Macros to View BoQ information |
