|
| 1 | 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. | 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. |
| 2 | Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet | Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet |
| 3 | Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. | Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. |
| 4 | Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. | Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. |
| 5 | Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery | Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery |
| 6 | Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle | Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle |
| 7 | Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. | Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. |
| 8 | Pin'up board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pin'up board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete | Pin'up board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pin'up board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete |
| 9 | Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. | Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. |
| 10 | Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet | Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet |
| 11 | Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. | Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. |
| 12 | Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) | Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) |
| 13 | Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms. | Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms. |
