Name of Work:- Githni Chaurahe par High Mast Light ke Asthpna karya
Sl. No.
Item Description
1
Supply and fixing of 16.0 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 3mm, top minimum100mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3. & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 8 luminaries & its control gear boxes,0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates etc Complete in all respect. as per direction and satisfaction to the Engineer-in-charge. as per 21.3.1(291599*0.8475=247130.15)
2
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. 5 year warernty as perd.s.r 2025 8.17.5(5504*0.8475=4664.64)
3
Supply and Fixing of LED aviation obstruction light sr no 409
4
Supply and laying of 35 sq. mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be roperly connected with the earth conductor by clamps etc. as per 20.1.11(405*0.8475=343.24)
5
Wiring for circuit/submain wiring along with earth wire with the following size of FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduct as required (2*4 sq.mm+1*4 sq.mm)as per dsr 2025 -1.14.3 (373*0.755*0.97=273.17)
6
Earthing with G.I earth pipe 4.5Meter long 40 mm dia including accessoaries and providing masonry enclousre with copper plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.dsr 2025-5.2(7658.00*0.755*0.97=5608.34)
7
Supply and erection of factory fabrication and wired metal clad dust and vermin proof mounting panel TPN switch board complete sr no sor 801 aii
8
Cable Laying Looping and Fitting Charges as per MR
9
SITC of designer Light for laying around the pole in all respect as per MR
10
S/F Shilanayash Board Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
