|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering including ridge complete all as specified and directed. |
| 2 | Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing, complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof ridge, rain gutter etc. fixed with self tapping screw complete all as specified and directed. |
| 5 | M& L for 300x300x10mm colour endura heat reflrctive cool roof (SRI) tiles having solar reflective index value > 90, colour & texture pettern as approved by Engr-in -charge, make: johnson or equivant, complete all as spcified. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided formid steel work of any description |
| 7 | Supply and Fix mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.s and similar work confrming to Fe 290.Gde E-165 |
| 8 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome to new steel surfaces of any description over 10 cm width or girh not otherwise described. |
| 9 | Preparation old surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) to stone and rubbish off the premises complete all as specified and directed. |
| 11 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed. |
| 12 | M& L for 300x300x10mm multi-colour matt finish type endura.Endura wall tiles in verticale surface having cube atep style ,colour & texture pettern as approved by Engr-in -charge,make: johnson or equivant, complete all as spcified |
| 13 | Demolition of concrete in ground floors and pavings n. exc 15 cm thick complete all as specified and directed. |
| 14 | M&L for Cement concrete typeD-2, 1:4:8 (40mm graded aggregate ) 75mm thick for sub base of floors complete all as specified and directed. |
| 15 | M&L for Screed bed or bedding layer of mortor 20 mm thick in CM 1:4 for laying floor finishes all as specified and directed. |
| 16 | M& L for 300x300x10mm multi-colour matt finish type endura.Endura floor tiles having cube atep style ,colour & texture pettern as approved by Engr-in -charge,make: johnson or equivant, complete all as spcified |
| 17 | M&L 75mm thick cement concrete type C-2 , 1:3:6 (using 40mm graded stone aggregate as in plinth protection in alternative bay and surface finish even and smooth with out using extra cement complete all specified and directed. |
| 18 | Taking down chowkhats or frames with out taking off the shutters from the frames not exc 1.50 sqm each and stacking for issuing under credit all as specified and directed |
| 19 | Supply and fix Solid PVC door frames size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS squre tube, fixed to openings all as specified and directed |
| 20 | M&L for Factory made solid panel PVC door shutter 30mm thick (styles) consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC 'C' channel having aPVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side& as gap insert for top rail and bottom rail; Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specfication & drawing all as specified and directed |
| 21 | Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc |
| 22 | M&L for Rendering in CM 1:6, 15 mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 23 | M&L for Rendering with WPC in CM 1:4, 15mm thick on other than fair faces of brick work or concrete surfaces all as specified and directed. Note : WPC shall be measured and paid separately |
| 24 | M & L prepation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed directed by Engr-in-charge. |
| 25 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of primer all as specified and as directed directed by Engr-in-charge. |
| 26 | M & L prepation of old wall surfaces and applying two coats of cement base paint complete all as specified and as directed directed by Engr-in-charge. |
| 27 | Demolition for Brickwork or stone/boulder masonry, built in lime mortar includingall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 28 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 29 | S&F for Liquid water proofing compound, complete all as specified |
| 30 | M&L 75 mm thick PCC (Plain cement concrete) type D-2 1;4;8 (40 mm graded aggregate ) as in sub base. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 32 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), includingmaking joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 33 | Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement. Please Enable Macros to View BoQ information |
