|
| 1 | Supply, installation, testing and commisioning of FRP Pressure sand filter of 3500 LPH capacity, having vessel size 16\\" x 65\\" (D x H) with 2.5\\" top media removal opening, maximum working pressure 10 bar and operating temperature range of 1-500C. The filter shall be filled with graded silex and sand media for removal of odor, colour, organic impurities and residual contaminants from rainwater, Make Tata/ Equivalent. |
| 2 | Supply, installation, testing and commisioning of FRP Activated carbon filter of 3500 LPH capacity, having vessel size 16\\" x 65\\" (D x H) with 2.5\\" top media removal opening, maximum working pressure 10 bar and operating temperature range of 1-500C. The filter shall be filled with silex and activated carbon (IV 1050 grade), Make Tata/ Equivalent. |
| 3 | Providing and installation of chlorine dosing pump of capacity 6 LPH/ 4 Kg/cm2, make: E-Dose for chlorination of treated rain water including supply of chemical storage tank of capacity 50Ltr, injection assembly, suction and delivery tubing, mounting accessories, etc. complete. |
| 4 | Supply and installation of 1 HP single phase centrifugal pump of dischatge 4m3/hr@ 20m, suitable for clear water application, complete with electric motor, base plate, coupling and necessary accessories, complete as per instruction of Engineer-in-charge. Make Kirloskar/ CRI/ Havells/ Crompton. |
| 5 | Supply and installation of 1.5 HP single phase centrifugal pump of suitable for clear water application, complete with electric motor, base plate, coupling and necessary accessories, complete as per instruction of Engineer-in-charge. Make Kirloskar/ CRI/ Havells/ Crompton. |
| 6 | Supply and installation of 5 HP Three phase centrifugal pump with cast iron impeller, casing, CS shaft and gland packed suitable for 6 to 15 mtr head and 30 LPS for clear water application, complete with base plate, coupling and necessary accessories, complete as per instruction of Engineer-in-charge. Make Kirloskar/ CRI/ Havells/ Crompton. |
| 7 | Supply, installation, testing and commisioning of all related electrical works for the filteration system including float switch for automatic water level management, dry run protection and over flow protection for pump safety. The scope includes supply and laying of suitable size FRLS copper cables of length approx 50 mtrs, wiring from control panel to pumpand sensors, necessary conduits, terminations, earthing, MCB protection and complete electrical connections. Make of cables Finolex/RR or equivalent. |
| 8 | Providing and fixing of SS wire mesh size 25 x 25 mm and dia of rod 3 mm in position with tightening bolt, nut & washers as required complete as per the direction of Engineer-in-charge. |
| 9 | Supplying, providing and fixing 200 mm square type uPVC gutter with spouts at the eve of roof for collecting rain water, (over laps should be glued inorder to prevent leakage) including GI clambs for holding gutter fixing to line and level including cost and conveyance of all materials, labour, all leads and lifts, other incidentals etc. complete. |
| 10 | Supplying and fixing the 80 mm dia approved quality PVC flexible hose including cost and conveyance of all materials, labour charges, all other sundries etc. complete as directed by the Engineer-in-charge. |
| 11 | Supplying and fixing Brass ball valves approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels. |
| 12 | 25 mm size |
| 13 | 40 mm size |
| 14 | Supplying and fixing PVC ball valves approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels. |
| 15 | 32 mm size |
| 16 | 40 mm size |
| 17 | Supplying and fixing the 20 mm Chambal / approved make water meters by the Engineer-in-charge, including cost of materials, labour charges, all other incidentals etc. complete. |
| 18 | Supplying and installing 10000 Ltr water storage tanks of sintex - Reno / Megha / Wesfa with white coating inside or equivalent brand approved by Engineer-in-charge at all heights, including cost and conveyance of materials, all labour for lifting etc. complete. |
| 19 | Supplying and installing 5000 Ltr water storage tanks of sintex - Reno / Megha / Wesfa with white coating inside or equivalent brand approved by Engineer-in-charge at all heights, including cost and conveyance of materials, all labour for lifting etc. complete. |
| 20 | Supplying and fixing 110 NB PVC downwater pipe 4kg/cm2 to the correct line and level including cost of specials for fixing the pipes by means of necessary brackets in concrete/steel structurals, fabricating and fixing clamps @ 1.5m c/c, cost and conveyance of all materials, labour, all necessary fixtures, couplers, incidentals and applying zinc chromate primer & synthetic enamel paint on the brackets etc. complete, excluding cost of structurals. |
| 21 | Supplying and fixing 160 NB PVC downwater pipe 4kg/cm2 to the correct line and level including cost of specials for fixing the pipes by means of necessary brackets in concrete/steel structurals, fabricating and fixing clamps @ 1.5m c/c, cost and conveyance of all materials, labour, all necessary fixtures, couplers, incidentals and applying zinc chromate primer & synthetic enamel paint on the brackets etc. complete, excluding cost of structurals. |
| 22 | Supplying and fixing 200 NB PVC downwater pipe 4kg/cm2 to the correct line and level including cost of specials for fixing the pipes by means of necessary brackets in concrete/steel structurals, fabricating and fixing clamps @ 1.5m c/c, cost and conveyance of all materials, labour, all necessary fixtures, couplers, incidentals and applying zinc chromate primer & synthetic enamel paint on the brackets etc. complete, excluding cost of structurals. |
| 23 | Supplying, fixing, laying and jointing the 32 mm dia 10 Kg pasted type PVC pipes of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. |
| 24 | Supplying, fixing, laying and jointing the 40 mm dia 10 Kg pasted type PVC pipes of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. |
| 25 | Supplying, fixing, laying and jointing the 50 mm dia 10 Kg pasted type PVC pipes of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated soil and storing the excavated soil within a lead of 150 m for backfilling including costs / hire charges of excavator, tipper, labour other incidentals complete. |
| 27 | Disposal of stone rubble/ concrete/ moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 2.5 km for all lifts, complete as per directions of Engineer-in-charge. |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size) including mixing, laying, compacting, all labour charges, cost and conveyance and delivery, handling, unloading, storing of all materials etc. complete as directed by Engineer-in-Charge. |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources) including costs and conveyance of all materials, labour, mixing, laying, tools and plants etc complete. |
| 30 | Providing and laying in position ready mixed or site batched PCC/ RCC 1:1.5:3 using 20mm down graded metal including cost and conveyance of all materials, cost of formwork, labour for mixing, laying, consolidating, curing etc. complete all as directed by the Engineer in charge including cost of cement. |
| 31 | Plastering with CM 1:4, 12mm thick floated hard and trowelled smooth for walls including watering, curing, cost and conveyance of all materials and labour charges, handling, unloading, finishing, casing made in the wall for electrical/plumbing works other incidentals etc complete. including costs of cement. |
| 32 | Supplying, fabrication and fixing in position TMT reinforcement bars of grade Fe 500D of various diameters for RCC work including straightening, cutting, bending, binding with 22 SWG GI wires and providing concrete cover blocks, all complete upto plinth level. |
| 33 | Supplying, fabrication and placing in position structural frame using hollow sections and plates, work includes cutting & welding and applying one coat of Zinc chromate primer and 2 coats of synthetic enamel paint of approved colour and shade, hire charges of tools and plants, cost of electrodes, other incidentals etc. complete all as directed by the Engineer-in-charge. |
| 34 | Providing and constructing solid block masonry using best quality solid cement block of size 300x 200x150mm in CM 1:5 in foundation & superstructure including costs and conveyance of all materials, carriage, labour, curing, racking joints, handling, unloading, storing of all materials etc. complete as directed by the Engineer-in-Charge. |
| 35 | Providing & fixing 0.36 mm thick coloured Aluminium Troughed roofing/ cladding sheet at all height using self tapping and drilling carbon steel screws of 6x70mm size & 3mm thick EPDM sealing washers to be fixed on every alternate crest of sheets and overlaps of sheets to be fixed by stitch screws with minimum end overlaps of 150mm.(Finished area of roof sheet will only be measured and considered for payment. Overlaps will not be measured) |
| 36 | Demolishing stone rubble masonry/ cement concrete work/ brick masonry manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 150 metres lead as per direction of Engineer-in-charge Engineer-in-charge. Please Enable Macros to View BoQ information |
