|
| 1 | Rewinding of complete motor as per details given in the scope of work at Sr.No.1 for the following ratings. |
| 2 | a)Up to 1 KW rating |
| 3 | b)Above 1 KW but up to 2.2 KW |
| 4 | c)Above 2.2 KW but up to 5 KW |
| 5 | d)Above 5 KW but up to 10 KW |
| 6 | e)Above 10 KW but up to 15 KW |
| 7 | f)Above 15 KW but up to 25 KW |
| 8 | g)Above 25 KW but up to 37 KW |
| 9 | h) i Above 37 KW but up to 55 KW |
| 10 | h) ii DO BUT ID FAN 55KW/60KW 750RPM |
| 11 | i) Above 55KW but up to 75KW |
| 12 | j) Above 75KW but up to 110KW |
| 13 | k) Above 110KW but up to 160KW/200KW |
| 14 | Partial repairing of motor winding as per details contained in the scope of work as at Sr.No.2 for the following ratings: |
| 15 | a) Upto 1 KW |
| 16 | b) Above 1 KW but upto 2.2 KW |
| 17 | c) Above 2.2 KW but upto 5 KW |
| 18 | d) Above 5 KW but up to 10 KW |
| 19 | e) Above 10 KW but up to 15 KW |
| 20 | f) Above 15 KW but up to 25 KW |
| 21 | g) Above 25 KW but up to 37 KW |
| 22 | h) i Above 37 KW but up to 55 KW |
| 23 | h) ii DO BUT ID FAN 55KW/60KW 750RPM |
| 24 | i) Above 55KW but up to 75KW |
| 25 | j) Above 75KW but up to 110KW |
| 26 | k) Above 110KW but up to 160KW/200KW |
| 27 | l) Above 160KW but up to 600KW |
| 28 | Rewinding of control Transformers & Coils as per details contained in scope of work as at Sr. No. 3 for the followings: |
| 29 | a) Control Transformers up to 250VA |
| 30 | b) '-do- but above 250VA but up to 500VA |
| 31 | c) Coils of Brake of Cranes |
| 32 | d)'-do- of ACB, MOCB etc |
| 33 | Repairs of submersible Pumps |
| 34 | a) Complete repairs of submersible pumps as defined in Scope of work at Sr. No. 4 (a) |
| 35 | b) Partial repairs of submersible pumps as defined in Scope of work at Sr. No. 4 (b) |
| 36 | Rewinding of ceiling fan of any make and size as defined in Scope of Work at Sr. No. 5 |
| 37 | Rewinding of exhaust/ pedestal/ bracket fans of any size as defined in Scpe of Work at Sr. No. 6 of following sizes: - |
| 38 | a) Up to & including 12” Sweep |
| 39 | b) Above 12 “ but up to & including 18” |
| 40 | c) Above 18” but up to & including 24” Sweep |
| 41 | Repair of Ceiling / Exhaust/ Pedestal/ Bracket fans as defined in Scope of work at Sr. No. 7. |
| 42 | Repainting of ceiling/ Exhaust/ Pedestal/ Bracket fans as defined in Scope of work at Sr. No. 8. |
| 43 | Fabrication of new Rotor Shaft for ceiling/ Exhaust/ Pedestal/ Bracket fans as defined in Scope of work at Sr. No. 9. |
| 44 | Repairs of Welding Generator Set of any make & size as defined in Scope of work at Sr. No. 10. |
| 45 | a) Rewinding of Motor or Generator portion |
| 46 | b) Repairing of Leads of Motor or Generator portion |
| 47 | c) Misc. repairs of Welding Generator Set as defined in Scope of work |
| 48 | Repairs of Portable Power Tools as defined in Scope of work at Sr. No. 11 |
| 49 | Repair of reflector type single/ double rod room heaters on unit rate basis by repairing/ replacing heater rod, insulator, wiring etc. as required as per instructions of Engineer in charge. |
| 50 | Repair of hot air blowers/ hot plates of any make by way of repairing/ replacing of defective items (Switch, Element, Motor, Blower wheel, Thermostat) as detailed below as per instructions of Engineer in charge. |
| 51 | a) By replacing only one item |
| 52 | b) By replacing two or more items in one equipment |
| 53 | c) Replacement/rectification of wiring |
| 54 | Repair of geysers of any capacity and by way of repairing/ replacing of defective items (Heating Element, Thermostat, gasket) as detailed below as per instructions of Engineer in charge. |
| 55 | a) By replacing one item |
| 56 | b) By replacing two or more items in one equipment |
| 57 | Repair of electric kettle/replacement of heating element |
| 58 | Dismantling and assembling of complete motor as per details given in the scope of work at Sr.No.16 for the following ratings. |
| 59 | a) Above 55KW but up to 75KW |
| 60 | b) Above 75KW but up to 110KW |
| 61 | c) Above 110KW but up to 160KW/200KW |
| 62 | d) Above 160KW but up to 600KW |
| 63 | Repair/replacement of HT Motor coil from 160KW to 600KW |
| 64 | a)For first coil |
| 65 | b) For Successive coil |
| 66 | Re-Straggering Job of Stator |
| 67 | a) upto37KW |
| 68 | b) Above37KW but upto75KW |
| 69 | c) Above 75KW but up to 160KW Please Enable Macros to View BoQ information |
