|
| 1 | Excavation in trenches, not execeeding 1.5m wide and not exceeding 1.5m deep for foundation, laying of pipes etc., or for shafts, wells, cesspits , manholes etc., n.exc 10 sqm on plan and n.exceeding 1.5 m depth and getting out in soft/ loose soil, etc. complete all as specified and as directed. |
| 2 | Excavation in trenches, not execeeding 1.5m wide and exc 1.5m but not exceeding 3.00m deep for foundation, laying of pipes etc., or for shafts, wells, cesspits , manholes etc., n.exc 10 sqm on plan and n.exceeding 1.5 m depth and getting out in soft/ loose soil, etc. complete all as specified and as directed. |
| 3 | Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick, etc. complete all as specified and as directed. |
| 4 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exe 1.5 m above the starting point, etc. complete all as specified and as directed. |
| 5 | M&L for Supply and pour natural river sand for cushioning of underground cable in trenches 8 cm below the cable and 15 cm thick over the cable all as directed and specified including watering and consolidation etc. complete all as specified and as directed by Engineer-in-Charge. Note: Punned thickness of sand to be consider for measurement purpose. |
| 6 | M&L for Sub class ‘B’ old size well burnt brick laid flate in trenches over the cable for protection of LT cable etc. complete all as specified and as directed. |
| 7 | Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish, M&L etc. complete all as specified and as directed. |
| 8 | M&L for plain cement concrete (1:4:8) mix, type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and as directed. |
| 9 | M&L Plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement, etc. complete all as specified and as directed. |
| 10 | Dismantling/Taking out Unserviceable LT cables of size upto 150 sqmm any core from any position i.e ground / walls / poles / culverts etc complete with protection pipe etc. complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 150 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 12 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 70 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 13 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 50 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 14 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 35 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 15 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 25 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 16 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 16 sqmm 4 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 17 | Supply, laying, jointing, testing and fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, and laid in trenches of 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 10 sqmm 4 core ISI marked ( IS - 7098 Part-1) and its latest amendments etc. complete all as specified and as directed. |
| 18 | M&L for 50mm bore GI pipe light grade with all fittings laid in trenches or in floors/fixing with pole including taking down existing steel tubing and connections etc. complete all as speciffied and as directed. |
| 19 | M&L for 40mm bore GI pipe light grade with all fittings laid in trenches or in floors/fixing with pole including taking down existing steel tubing and connections etc. complete all as speciffied and as directed. Please Enable Macros to View BoQ information |
| 20 | M&L for 40mm bore GI pipe light grade with all fittings laid in trenches or in floors/fixing with pole including taking down existing steel tubing and connections etc. complete all as speciffied and as directed. Please Enable Macros to View BoQ information |
