|
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 3 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 6 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 9 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 10 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed |
| 12 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 15 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed |
| 16 | Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embeded in natural ground etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed |
| 17 | Dismantling of fencing wire mesh, any type etc complete all as specified and as directed |
| 18 | Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed. |
| 19 | Material and labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 20 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 21 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 22 | Supply and fix in repairs 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 23 | Supply and fix in repairs 7 to 8 mm Hollow Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall cladding / Vertical surface and fixing at site incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 24 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee (15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 25 | Material and labour for providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 26 | Material and labour for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed Notes: WPC shall be measured and paid seperately under relevant itesm |
| 27 | Material and labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminum paint on top @ 0.10 litre/sqm incl taking down existing HP tiles or any other treatment etc complete all as specified and as direted |
| 28 | Material and labour for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 29 | Material and labour for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 30 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 31 | Material and labour for Rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed |
| 32 | Material and labour Glossy Finished Glazed ceramic tiles (Coloured) as in vertical surface 300X450Xmm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 33 | Material and labour for Glossy Finished Non - skid ceramic coloured tiles of size 600mmX600mmX8mm thick as in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 34 | All as per item no 33 avove but as in vertical surface etc complete all as specified and as directed |
| 35 | Material and labour for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) Granite (of any type) work for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round etc complete all as specified and as directed |
| 36 | Material and labour for 50mm thick Sand filling under floors or in foundations including watering and consolidation under bedding for interlocking tiles etc complete all as specified and as directed |
| 37 | Material and labour for machine presssd Pre-Cast concrete rubber moulded interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed |
| 38 | Supply and fix for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 39 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 40 | Material and labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 41 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 42 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 43 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 44 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 45 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items. |
| 46 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items. |
| 47 | Supply and fix in repair 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, incl pivet, hinges , Stainless steel handle 02 nos (250mm long) incl fixing arrangements, etc complete all as specified and as directed . |
| 48 | Supply and fix in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed |
| 49 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 50 | Supply and fix for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold the doors properly for a long life) |
| 51 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 52 | Supply and fix 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 53 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 54 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 55 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 56 | Supply and fix 8 mm Aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed |
| 57 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 58 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 59 | Supply and fix Fancy type Brass barrel tower bolts bolt 200mm long of extruded section etc complete all as specified and as directed |
| 60 | Supply and fix Fancy type Brass handles 150mm long, cast type, anodised etc complete all as specified and as directed |
| 61 | Supply and fix Fancy type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed |
| 62 | Supply and fix Fancy type Brass Door stopper Overall length of cover plate 150 mm long Ditto, but of brass body and tongue with hard drawn steel spring etc complete all as specified and as directed |
| 63 | Supply and fix in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed, Make Cat no 4018 of Prayag of equlavent make of Cera) |
| 64 | Supply and fix in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed |
| 65 | Supply and fix in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 66 | Supply and fix in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 67 | Supply and fix in repairs PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equlavent make of Cera) |
| 68 | Supply and fix in repairs 15 mm pillar taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6803 Marcus series of Prayag or equivalent make as specified in CA) |
| 69 | Supply and fix in repairs 100mm (4\\") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 of Prayag or equivalent make as specified in CA) |
| 70 | Supply and fix in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No 6810 Marcus series of Prayag or equivalent make as specified in CA) |
| 71 | Supply and fix Bib Cock two way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA) |
| 72 | Supply and fix chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make as specified in CA) |
| 73 | Supply and fix in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA) |
| 74 | Supply and fix in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA) |
| 75 | Supply and fix in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction. |
| 76 | Supply and fix in repairs 5mm thick Looking mirror of selected quality area exc 0.72 Sqm but not exc 1.00 sqm etc fixed to 4 Nos of Studs etc complete all as specified and as directed |
| 77 | Supply and fix GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 78 | Supply and fix GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 79 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 80 | Supply and fix in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 81 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 82 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floors etc complete all as specified and directed |
| 83 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floor etc complete all as specified and directed |
| 84 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 85 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 86 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 87 | Supply and fix in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) Length exc 1.30 mtr but not exc 1.80 mtr etc complete all as specified and as directed |
| 88 | Supply and fix in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia thikness 0.80 mm made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 89 | Supply and fix in repairs 1.25mm thick rolling shutter gear opeated type with level gear box and crank handle as specified including top cuver, anchoring rod, hasp and staple and one shop coat of primer erected in postion as indicated, complete all as specified and as directed |
| 90 | Repair and servicing of rolling shutters including taking down shutters and refixing in same opening of size exc 5 Sqm N.exc 10Sqm complete duly greasing, oiling, welding as required complete all as specified and directedNotes: Ball bearing, Saftey Lever Lock, hood, anchroing rod and any other accessories reqd to function the shutter inclusive in the rate. Nothing extra shall be admission on this account |
| 91 | Supply and fix in repair Safety lever locks mild steel with 4 levers for rolling shutters etc complete all as specified and as directed |
| 92 | Supply and fix in repair Ball bearing for rolling shutters etc complete all as specified and as directed |
| 93 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 94 | Material and labour for preparing newely plastered surface of ceiling and applying two of acrylic coats distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 95 | Material and labour for Preparing new plastered suface of walls and applying two coats of acrylic distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 96 | Material and labour for preparation New plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 97 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 98 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed |
| 99 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. etc complete all as specified and as directed |
| 100 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed et complete all as specified and as directed |
| 101 | Excavating in post holes(or similar holes) each n exc .5 cum getting out in Hard / Dense soil soil,returning, filling in and ramming earth in layers n exc 25 cm etc complete all as specified and as directed |
| 102 | Material and labour for Hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc all as specified and as directed |
| 103 | Material and labour for plain cement concrete Type D-2 1:4:8 (with using 40 mm graded stone aggregates) as in foundations and mass concrete etc complete all as specified and as directed |
| 104 | Material and labour for plain cement concrete 1:2:4 type B-1, with using 20 mm grades stone aggregates as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and base) incl form work etc complete all as specified and as directed |
| 105 | Material and labour for formwork with square / rectangular pillars, posts, struts, piers, columns and, ftg etc, stanchions with rough finished surface of concrete etc complete all as specified and as directed |
| 106 | Material and labour for Reinforced cement concrete (nominal mix) type B-1 (1:2:4) with using 20 mm graded stone aggregates as Columns, pillars, piers, posts, ftg, etc struts etc complete all as specified and as directed |
| 107 | Material and labour TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 108 | All as per item No 107 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed |
| 109 | Supply and fix framed work such as grills, gratings, guard bars etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 incl dismantling of existing Mild steel work work etc complete all as specified and directed. |
| 110 | Supply and fix posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed |
| 111 | Supply and fix mild steel screw bolts (machine made) with hexagonal or spuare heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not n.exc 5 cm long and diameter of shank 5 to 10 mm complete all as directed |
| 112 | Supply only galvanised chain link fencing of mesh size (75mmX75mmX3.15mm) etc complete all as specified and as dicected |
| 113 | Fixing only galvanised chain link fencing of mesh size (/75mmX75mmX3.15mm)) size and any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and as directed |
| 114 | Supply and fix PVC coated chain link fencing, size of mesh 75 mmx 75 mm made out of 3.15mm dia GI wire (conforming to relevant IS) excluding thickness of PVC coated , colour as approved, fixed to any type of fencing pots, standard rails, straining bolts etc complete all as specified and directed . |
| 115 | Supply only Mild Steel TMT round bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed |
| 116 | Supply and fix in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and orovising of galvanised mild steel wire, staples or steel pins, etc. complete all as directed. (each line wire measured) |
| 117 | Supply and fix in repairs barbed razor type concertina coil of 610 mm dia (when unstretched) fixed between the existing ‘V’ angle post and barbed wire over security wall /PCC /ground as per requirment with coil of coverage 6.00 running metre per coil, weight of each coil 9.50 to 10.00 Kg hot dip galvanized and binding with and including MS annealed wire of 0.90 mm , complete all as specified and directed . Please Enable Macros to View BoQ information |
