|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 3 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain color PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified. |
| 4 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 5 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 6 | M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified. |
| 7 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 8 | M&L for providing and fixing steel roller for aluminium sliding window with necessary screws etc. complete all as specified. |
| 9 | M&L for providing and fixing metal body concealed handel-Cum-Latch Lock For aluminium sliding window with necessary screws etc. complete all as specified. |
| 10 | S&F 4.0mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 11 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified. |
| 12 | S&F Pressed steel frames of siza 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed. |
| 13 | S&F Pressed steel frames of siza 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed. |
| 14 | S&F 35mm thk second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 15 | S&F 35mm thk second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 16 | M&L Pre-cast cement concrete block masonry, Type C1 (1:3:6) (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified. |
| 17 | Taking down shutter of any description area exc 1.00 Sq.m but n exc 2.00 Sq.m each complete all as specified and directed. |
| 18 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 19 | Supply & Fix 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed. |
| 20 | Supply & Fix 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed. |
| 21 | Supply & fix 150 mm long extruded aluminium alloy handles fabricated type all as specified. |
| 22 | Supply & fix 100 mm long extruded aluminium alloy handles fabricated type all as specified. |
| 23 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 24 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel over a coat of zinc chromate primer complete all as specified and as directed. |
| 25 | M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 26 | Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work) all as specified and directed. |
| 27 | S&F clean sawn second class hardwood in scantlings complete all as specified and directed. |
| 28 | S&F Particle board 18/19mm thickness, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed. |
| 29 | S & F Continuous (piano) hinges of 30mm flap width, mild steel, bright finish or electrogalvanised |
| 30 | S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 31 | S&F 25 mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, Knobs and rollers etc. complete all as specified and directed. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 33 | S&F 3.0 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 34 | S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 35 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 36 | S&F in repairs 10 ltrs PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever complete all as specified and directed. |
| 37 | S&F in repairs CP brass shower rose 125 mm size with ferurlle of 150 mm long suitable for 15 mm bore pipe complete all as specified and directed. |
| 38 | S & F in repair 15 mm dia bib taps,chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 39 | S & F in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 40 | S&F PVC waste pipe of standard pattern, not less than 75cm long, 40 mm dia for steel sink waste cuppling complete all as specified and directed. |
| 41 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed |
| 42 | Supply and fix 15 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by Engineer-in-Charge. |
| 43 | S & F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including provision of lime concrete bedding and making good to floor complete all as specified and directed. |
| 44 | S & F in repair vitreous china, wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified. |
| 45 | S&F in repairs Vitreous China wash basin, white, flat back, size 550X400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 46 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified. |
| 47 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 48 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick Kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mmx450mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. |
| 49 | Demolition and breaking up drain pipes of 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified. |
| 50 | S&F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 51 | S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 52 | S&F 110 mm bore PVC (SWR) bend any radius with access door etc. complete all as specified. |
| 53 | S&F 75 mm bore PVC (SWR) bend any radius with access door etc. complete all as specified. |
| 54 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed. |
| 55 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed. |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises. |
| 57 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in cement plaster (1:6) complete all as specified and directed. |
| 58 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement plaster (1:3) rendering as backing layer complete all as specified and directed. |
| 59 | M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick in cement plaster (1:3) rendering as backing layer complete all as specified and directed. Please Enable Macros to View BoQ information |
| 60 | M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick in cement plaster (1:3) rendering as backing layer complete all as specified and directed. Please Enable Macros to View BoQ information |
