|
| 1 | REPAIR TO ALMIRAH STEEL LARGE WITH SHELVES (FD-67(M)/FD-339/FD-1031) : Dismantling of existing unserviceable CP handles. S&F new CP handles of approved quality. |
| 2 | Dismantling of unserviceable Lock without damaging the adjacent parts of almirah. S & F new 75mm Brass lock four levers approved by GE (ISI Marked including duplicate keys) of suitable size all as specified in drawing and as directed by GE/Engr-in-charge |
| 3 | Dismantling of unserviceable bottom legs. S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick MS sheet by welding as directed by the Engr-in-Charge. |
| 4 | S&F of MS cleats shall be made of 2 mm thick made shape to support the shelves complete as directed |
| 5 | Dismantling of unserviceable butt hinges. Supply and fixing of new Hinges 75mm medium grade as required/existing and as directed by Engr-in–Charge. |
| 6 | Dismantling of unserviceable locking assembly with complete mechanism. S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg or as directed by Engr-in Charge. |
| 7 | Dismantling of unserviceable Front shutter/Door (Left or Right) without damaging other parts. Supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing rest all as per drawing as directed by Engr-in–Charge. |
| 8 | Dismantling of unserviceable locking assembly cover. Supply and fixing of Cover for locking device made of 1mm thick MS sheet duly painted as existing/directed by Engr-in–Charge. |
| 9 | Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 10 | REPAIR TO ALMIRAH STEEL MEDIUM/SMALL ( FD-243/FD-1032 ) : Dismantling of existing unserviceable CP handles. S&F new CP handles of approved quality and approved by Engr-in-Charge. |
| 11 | Dismantling of unserviceable Lock without damaging the adjacent parts of almirah. S & F new 75mm Brass lock four levers approved by GE (ISI Marked including duplicate keys) of suitable size all as specified in drawing and as directed by GE/Engr-in-charge |
| 12 | Dismantling of unserviceable bottom legs. S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick MS sheet by welding as directed by the Engr-in-Charge. |
| 13 | Dismantling of unserviceable locking assembly cover. Supply and fixing of Cover for locking device made of 1mm thick MS sheet duly painted as existing/directed by Engr-in–Charge. |
| 14 | Dismantling of unserviceable butt hinges. Supply and fixing of new Hinges 75mm medium grade as required/existing and as directed by Engr-in–Charge. |
| 15 | Dismantling of unserviceable locking assembly with complete mechanism. S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg or as directed by Engr-in Charge. |
| 16 | Dismantling of unserviceable shelves. S&F shelves made of 1 mm thick MS sheet duly painted as existing shape and size as specified on drg. |
| 17 | Dismantling of unserviceable Front shutter/Door (Left or Right) without damaging other parts. Supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing rest all as per drawing as directed by Engr-in–Charge. |
| 18 | S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed |
| 19 | Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah med steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 20 | REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) : S&F in replacement of unserviceable ply top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & bolts with washers without having any joints after tightening of frame by welding. make : Green Ply/Century Ply/Archid Ply/Greenpanel shape and size as per drg and as directed by Engr-in-Charge. |
| 21 | REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest. S&F new board of Head rest to be made of 18 mm thick Ext grade MDF board both sides laminated of approved shade duly covered with beading all around (Make : Action Tesa/Novapan/Green Pannel) of size with suitable Screws with the cleats as specified on drg and as directed by Engineer-in-Charge. |
| 22 | REPAIR TO FOOT BOARD : All as per item Srl No. 3.01 but for foot board. |
| 23 | Dismantling of unservicable long rail. Supply and fixing of New Long rail of 25x65 mm CR rectangular pipe (18 gauge) medium grade in place of unservicable long rail all as specified duly arc welded as directed by Engr-in–Charge. |
| 24 | Dismantling of unservicable short rail. Supply and fixing of New short rail of 25x65 mm MS rectangular pipe (18 gauge) medium grade in place of unservicable short rail all as specified duly arc welded as directed by Engr-in–Charge. |
| 25 | Dismantling of unservicable stiffner. Supply and fixing of New stiffners 25x25 mm MS rectangular square pipe (18 gauge) medium grade in place of unservicable stiffners all as specified duly arc welded as directed by Engr-in–Charge. |
| 26 | S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. |
| 27 | M&L/Welding/Re-alignment/ loose components of whole parts , scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 28 | REPAIR TO CHAIR VERANDAH (FD-256) : Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane. |
| 29 | Taking out unserviceable 10 mm dia round bar. S & F in repairs 10mm dia round bars 450mm long welded 75mm below the bottom of seat to the front legs in Chair varandah all as directed by Engr-in–Charge. Engr-in-Charge. |
| 30 | M&L of welding to broken whole components and alignment of chair varandah so as to bring the whole item in serviceable condition, welding portion should be smoothed by mild grinder as directed by Engr-in-Charge. |
| 31 | M&L painting of chair steel frame with two coat of synthethic enamel paint of white shade Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding, applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 32 | S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. |
| 33 | REPAIR TO CHAIR CB STEEL WITH ARMS (FD-75(M) : Labour for removing the existing worn out/ unserviceable seat of chair CBA steel. S & F new seat frame of size 460 x 420 mm made from the commercial plywood 12 mm thick and 50 mm thick 32 D foam cushion, duly covered with tapestery cloth /rexine with Malmal cloth on the back of seat of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. |
| 34 | All as per Sl. No. 5.00 but for Back of Chair padded Steel of size 460x380mm |
| 35 | M&L for welding/nuts with 25 x 3.0 mm MS flat iron 510 mm long with holes/welding to fix Nuts and bolts to seat/back frame for fixing seat/back frame including nuts complete all as specified and as directed for Chair CBA Steel . |
| 36 | S&F new PVC Caps. |
| 37 | S&F new PVC arms as per sample. |
| 38 | M&L for Denting/bending/welding/repairs/damaged of whole parts, scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of Black/OG synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed for the Engr-in-Charge. |
| 39 | Dismantling of unserviceable shoes, S&F new PVC hard shoes as per drg and as directed by Engr-in-Charge. |
| 40 | REPAIR TO CHAIR COMPUTER (FD/E6/MAP/01) : S&F in repairs of maintenance free gas lift for Computer chair revolving rest all as shown in drg. |
| 41 | S&F in repairs of pedestral assy complete with injection moulded in black 50mm MS caster pin is of press fitted to each prong for holding the caster rest as per drg and directed by Engr-in Charge. |
| 42 | S&F in repairs of twin wheel castors as shown in drg and as directed by Engr-in-Charge. |
| 43 | Dismantling of unsv seat. S&F 12 mm TH hot pressed ply wood upholstered wih fabric and moulded Polyurethane foam with PVC liping all around all as per drg and as directed by Engr -in-Charge. |
| 44 | Dismantling of unsv seat. S&F 12 mm TH hot pressed ply wood upholstered wih fabric and moulded Polyurethane foam with PVC liping all around all as per drg and as directed by Engr -in-Charge. |
| 45 | Dismantling of unsv cloth of seat. S&F new cloth of approved shade with PVC liping all around all as per drg and as directed by Engr -in-Charge. |
| 46 | Dismantling of unsv cloth of back. S&F new cloth of approved shade with PVC liping all around all as per drg and as directed by Engr -in-Charge. |
| 47 | S&F in repair of handles of chair computer made of black integral skin polyurethane reinforced with with MS insert scratch proof complete as per drg and as directed by Engr-in-Charge. |
| 48 | REPAIR TO CHARPOY GI PIPE WITH PLY TOP ( FD-220) : Removing of old unserviceable ply top from existing charpoy GI pipe ply top and S&F the new 12mm thick BWR phenol bonded commercial plywood with unpolished edging(ISI marked) suitable for charpoy GI pipe having approximante size 1980mm x 900mmx12mm with mild steel galvanised MS nuts and bolts of size 70mm x 06mm with GI washer (Heavy Weight) & re-alignment of charpoy complete all as directed.by Engr-in-charge. Make : Green Ply/Century/Green Panel. |
| 49 | M&L Dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed . Make Jindal/TATA/PRAKASH. |
| 50 | M&L Dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 7.01 to the required size for short rail including threading at both ends complete all as specified and directed . |
| 51 | Removing of Old u/s legs of Charpoy and legs made out of old broken short rails retrieved from item Sr No 7.02 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge. |
| 52 | Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit. |
| 53 | Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx820mm long is measured as one unit. |
| 54 | M&L for Dismantling of existing unserviceable elbow GI three way. S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed . |
| 55 | M&L for Dismantling of existing unserviceable check nut 6 mm thick suitable for 32 mm bore. S&F new check nut 6 mm thick suitable for 32 mm GI pipe charpoy of approved make complete all as specified and directed . |
| 56 | M&L for welding/Painting of FMN Set whole parts, scraping of existing coat of paint complete filling, finishing and painting with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 57 | CHAIR REVOLVING, CHAIR EXECUTIVE MED/HIGH BACK (TP) : M&L for removing the existing worn out/ unserviceable seat of chair revolving. S & F new seat upholstred with leatherite duly finished, seat cushion made from moulded PU foam of 80 mm thick 32 density as per existing shape and size and as directed by Engineer-in-Charge. |
| 58 | M&L for removing the existing worn out/ unserviceable Back of chair revolving. S & F new seat upholstred with leatherite duly finished, seat cushion made from moulded PU foam of 80 mm thick 32 density as per existing shape and size and as directed by Engineer-in-Charge. |
| 59 | S&F in replacement of unsv Arm Rest of chair as per existing and as directed by Engr-in-Charge. |
| 60 | S&F in replacement of unsv hydraulic system of chair as per existing and as directed by Engr-in-Charge. |
| 61 | S&F in replacement of unsv pedestral assy complete with SS injection system as per existing shape and size to make the whole system serviceable and directed by Engr-in Charge. |
| 62 | Dismantling of unsv rollers (wheel) castors of padestral system S&F new rollers of twin as per existing shape and size and as directed by Engr-in-Charge. |
| 63 | DESK BENCH SCHOOL STUDENT COMBINED TYPE \\"A\\" & \\"B\\" STEEL : M&L continuous welding with gas welding to broken whole components of desk steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by mild grinding as directed by Engr-in-Charge. |
| 64 | Dismantling of unserviceable top of desk. S& F new top of desk and new top of size 40\\"x18\\" made of prelaminted MDF board exterior grade (both sides) with suitable size of nuts and bolts. 4mm teak wood/PVC beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top and as directed by Engr-In-Charge. |
| 65 | Dismantling of unserviceable seat of bench. S& F New Seat of bench of size 36\\"x10\\" made of prelaminted MDF board exterior grade (both sides) with suitable size of nuts and bolts. 4mm teak wood beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top and as directed by Engr-In-Charge. |
| 66 | Dismantling of unserviceable back of bench. S& F New back of bench of size 36\\"x6\\" made of prelaminted MDF board exterior grade (both sides) with suitable size of nuts and bolts. 4mm teak wood beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top and as directed by Engr-In-Charge. |
| 67 | Dismantling of unservicable long rail of size 40\\"x25 mm. S&F of long rail 40\\"x25mm Conduit pipe of mild steel of 1.6mm wall thickness in all respect and as directed by Engr-in–Charge. |
| 68 | Dismantling of unservicable Short rail of size 9\\"x25 mm. S&F of short rail 9\\"x25mm Conduit pipe of mild steel of 1.6mm wall thickness in all respect and as directed by Engr-in–Charge. |
| 69 | M&L, welding of loose components of whole parts, scraping of existing coat of paint complete filling, finishing and painting with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 70 | Dismantling of unservicable PVC Shoes. S&F new PVC Shoe of suitable size and as directed by Engr-in-charge. |
| 71 | Dismantling of unservicable PVC Cap. S&F new PVC cap of suitable size and as directed by Engr-in-charge. |
| 72 | REPAIR OF FORM WITH AND WITHOUT BACK (FD-77 and FD-78) : Dismantling of unservicable seat of form. S&F of new seat of suitable size of teakwood first class plank in one piece of thickness 25mm and french polished in high gloss as per drg and as directed by Engr-in–Charge. |
| 73 | Dismantling of unservicable back of form. S&F of New back of suitable size of teakwood first class plank one piece of minimium thickness 25mm french polished in high gloss finish as specified and directed by Engr-in–Charge. |
| 74 | S&F of Black PVC shoes suitable for legs of size 25mm square tube as approved by Engr-in-charge |
| 75 | Dismantling of unserviceable angle rail left or right of form. S&F of angle rail of suitable size made from 25 mm squared tube of thickness 1.6 mm as directed by Engr-in–Charge. |
| 76 | Dismantling of unserviceable stiffner of form. S&F of stiffner made to shape of suitable size made from 25 mm squared tube of thickness 1.6 mm as directed by Engr-in–Charge. |
| 77 | L&M for scrapping/welding/Painting whole parts of form down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer, all as specified and directed for the Engr-in-Charge. |
| 78 | REPAIR TO LOCKER BED SIDE STEEL (FD 1029) : M&L Dismantling of existing unserviceable Hasp and Stapple. S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed by Engr-in-charge. |
| 79 | M&L Dismantling of of existing unserviceable MS Butt Hinges. S&F new MS Butt Hinges with suitable MS screws as per specification and as per drg. 75 mm long medium, quality of approved pattern complete all as specified and directed by Engr-in-charge. |
| 80 | M&L Dismantling of existing unserviceable legs. S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick MS sheet by welding/rivittes and finishing with mild griding as per drg and as directed by the Engr-in-Charge. |
| 81 | Dismantling of unserviceable shelf. S&F shelves made of 1 mm thick MS sheet duly painted shape and size as specified on drg. |
| 82 | M&L Dismantling of existing unserviceable Handles. S&F new handles CP steel 75mm long with suitable MS secrews of approved quality complete all as specified and directed by Engr-in-charge. |
| 83 | Dismantling of unserviceable Front shutter/Door (Left or Right) without damaging other parts. S&F of front shutter complete in all respects made of 1mm thick MS steel made to shape existing duly painted with two coats of synthetic enamel paint over a coat of red oxide or according to drawing rest all as per drawing as directed by Engr-in–Charge. |
| 84 | Dismantling of unserviceable hanging conduite pipe. S&F new hanging SS conduite pipe of size 15 mm thickness 1.6 mm with the existing bracket as shown in drg and as directed by Engr-in-charge. |
| 85 | Denting/bending/welding of whole parts of locker bed side steel, repairs of damaged parts, fixing loose shelves and scraping of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint colour/shade approved by Engr-in-charge (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge. |
| 86 | SHOE RACK STEEL (FD/E6/MAP/02/R) : Taking out the unserviceable pipe of 25mm dia of legs. Supply & fixing by way of arc welding 25mm dia MS Pipe of 18 gauge in all respects and all as per drawing and directed by Engr-in–Charge. |
| 87 | Dismantling of UNSV jali of shoes rack S&F new jali of shelves of existing size of black powder coated as per drg and as directed by Engr-in-charge. |
| 88 | Dismantling of unserviceable 19mm dia MS Pipe 18 guage. Supply & fixing 19mm dia MS Pipe 18 guage of suitable size made to shape as existing by way of gass welding to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing. |
| 89 | M&L with gas welding whole parts of shoe rack steel to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder and touched with enamel synthetic paint as directed by Engr-in-Charge. |
| 90 | Supply & fixing PVC Shoe of suitable size and 3 mm thickness to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing. |
| 91 | M&L painting of shoes rack steel frame with two coat of synthethic enamel paint of black Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 92 | TABLE OFFICE CLERK STEEL (FD-84M/FD-1004) :- Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Action Tesa/Green Panel / Novapan (ISI Marked) including welding of loose joints of existing frame before fixing the top 4mm teak wood/PVC beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top. Shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 93 | Dismantling of Unserviceable drawer, S&F New drawers with appropriate size of sheet as existing, shade of colour of synthetic enamel paint with locking device as per drg and as directed by Engr-in-Charge |
| 94 | Dismantling of unservicable leg in any condition. Supply and fixing of legs 25 mm square tube of mild steel of 1.6mm wall thickness make the whole unit in serviceable condition shown in drg dully painted with synthetic enamel paint of existing color/shade and directed by Engr-in–Charge. |
| 95 | Dismantling of unservicable unservicable PVC/ hard rubber shoes. Supply and fixing of PVC shoes suitable for legs of size 25mm square tube of minimum thickness 3 mm as approved by Engr-in-Charge. |
| 96 | Denting/bending/whole parts of rewelding with Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade Grey/OG colour (Make: Berger/ Asian Paint) using spray after giving a primer coat with red oxide as per speciaification and as shown on drg and directed by Engr-in-Charge. |
| 97 | REPAIR TO TABLE DINING ORs STEEL (FD-165) : - Dismantling of unsv top of Table S&F new top of table made up of 18/19 mm plywood of size 1900mmx685 mm best quality fixed with 22 guage of aluminium sheet with suitable screws on the top as per drg and as directed by the Engr-in-charge. |
| 98 | M&L with gas welding to whole parts of broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 99 | Dismantling of unservicable long stiffner/rail. Supply and fixing of long stiffner/rail 25mm square tube of mild steel of 1.6mm wall thickness duly painted to match the existing shade/color of the table as directed by Engr-in–Charge. |
| 100 | Dismantling of unservicable short stiffner. Supply and fixing of short stiffner 25mm square tube of mild steel of 1.6mm wall thickness duly painted to match the existing shade/color of the table as directed by Engr-in–Charge. |
| 101 | Dismantling of unservicable leg in any condition. Supply and fixing of legs 25 mm square tube of mild steel of 1.6mm wall thickness make the whole unit in serviceable condition shown in drg dully painted with synthetic enamel paint of existing color/shade and directed by Engr-in–Charge. |
| 102 | Dismantling of unservicable unservicable PVC/ hard rubber shoes. Supply and fixing of PVC shoes suitable for legs of size 25mm square tube of minimum thickness 3 mm as approved by Engr-in-Charge |
| 103 | Denting/bending/rewelding Repairs of broken joints, of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) using spray after giving a primer coat with red oxide directed by Engr-in-Charge. |
| 104 | REPAIR TO TABLE STEEL 900mm x 900mm (FD 1009) : - Removing of unserviceable top of table. S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan/Green panel (ISI Marked) including welding of loose joints of existing frame before fixing the top 4mm teak wood/PVC beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top. shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 105 | Dismantling of unservicable leg. S&F of legs 25 mm square tube of mild steel of 1.6mm wall thickness make the whole unit in serviceable condition shown in drg dully painted with synthetic enamel paint of existing color/shade and directed by Engr-in–Charge. |
| 106 | Dismantling of unservicable rail. S&F of long/Short rail 25mm square tube of mild steel of 1.6mm wall thickness match the unit duly painted as per drg and as directed by Engr-in–Charge. |
| 107 | Dismantling of unservicable Shoes. S&F of PVC shoes of thickness 3 mm suitable for legs of size 25mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes. |
| 108 | Removing of existing coat of paint from steel parts by scraping, filling and repainting after removing the unserviceable PVC shoes, with two coats synthetic enamel paint of approved shade using spray after applying a primer coat of red oxide. (Make: Berger/ Asian Paint) of as directed by Engr-in-Charge |
| 109 | M&L welding to broken whole components and alignment of Table dining so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 110 | TEAPOY VERANDAH (FD-255, FD-383) :- Removing of unserviceable top. S&F new top made out of 18/19 mm thick Ext grade prelaminted both sides MDF board of approved shade Action Tesa/Novapan/Green Panel (ISI Marked) of existing frame before fixing the top 4mm teak wood/PVC beading all around the top to be fixed with fevicol and nails of suitable size & well polished to match the shade of the top . shape and size all as specified on drg and as directed by Engr -in-Charge. |
| 111 | M&L with gas welding to broken whole components of steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 112 | M&L painting of Teapoy Verandah steel frame with two coat of synthethic enamel paint of white shade of Make : Berger/Asian paints after removing the rubber shoes including preparation of old surface by mild grinding, applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 113 | S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. |
| 114 | REPAIR TO TABLE BED SIDE STEEL (FD/E6/MAP/15(R)- Removing of unserviceable sides in any position, S&F new sides made out of 18/19 mm thick exterior grade both sides laminated MDF board of approved shade Make : Action Tesa/Novapan/Green Pannel Max (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge. |
| 115 | All as per Sl. No. 17.00 but for Back of Table Bed side. |
| 116 | All as per Sl. No. 17.00 but for top of Table Bed side. |
| 117 | S&F new top drawers made of MDF prelaminted board of exterior grade. |
| 118 | Removing of unserviceable telescopic channels in any position, S&F new SS telescopic channels with screws (ISI Marked). |
| 119 | S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge. |
| 120 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. Please Enable Macros to View BoQ information |
