|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia |
| 2 | Engaging of Earth work excavator for road cuttings,hard soil excavation during laying of HDPE pipeline |
| 3 | Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.). 160mm dia(8.0 kg/sqm SDR 17) |
| 4 | Laying and jointing of HDPE pipes in ready made trench by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing from time to time to the alignment and gradient and testing 160mm dia |
| 5 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. BENDS OD 160 mm |
| 6 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Tees OD 160 mm |
| 7 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. reducer OD 140 mm x 160 mm |
| 8 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Pipe ends long neck 160mm dia |
| 9 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes.MS Flanges 160mm dia |
| 10 | Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Supply and Fixing Electro Fusion Tapping saddle complying with BS EN 12201-3-2011, PN 12.5 rating & WRAS approved raw material as per BS 6920, manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade compounded raw material for usage in drinking water system and having working pressure of 10 bar. The cost shall includetesting of all materials, labour, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding of all taxes. SIZE 160 x 1” |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25mm nominal dia pipes |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50mm nomina dia pipes |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall 25 mm nominal dia Pipes |
| 14 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 15 | Supplying and fixing of CI sluice valve of PN-1.6 flnaged Hand wheel operated non raising SS stem quality complete with bolts,nuts,rubber insertions and tail pieces for jointing of Zoloto/ equivavlent brand as directed by Engineer in charge. |
| 16 | Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with FRP chamber cover size 765mm* 765mm with frame and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design bricks of class designation 7.5 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 17 | Engaging of Labour for earth work excavation at critical electrical/ telephone/internet cable locations, attending water pipeline(RCC,HDPE,GI) leakage works damaged while working and duct portions during laying of pipeline as per the directions of the Engineer-in-charge |
| 18 | Supply and fixing of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions.All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept 25mm |
| 19 | providing and fixing of rendroc plug cement for arresting the water leakage in varioues water supply lines including labour,plumber,helper and dewatering at the site location and other items like jute,rubber sheets,clamps with bolts etc as per necessity etc complete |
| 20 | Engaging of water tanker along with driver and along with two helpers,pumping motor and necessasry hose pipe for pumping water from water tanker to each individual quarters overhead tank incase of any sudden breakdown of pipeline during laying of pipeline, where the water will be taken from any existing sump inside the campus with additional necessasy items required as per direction of Engineer in charge |
| 21 | Providing and fixining bronze gate valve of zoloto brand 50mm gate valves |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 23 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 25 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 26 | providing and fixing of CPVC ball valve of approved brand |
| 27 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge. |
| 28 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of EngineerinCharge (a) Internal Work Exposed on wall |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineerincharge, beyond 50 m initial lead, for all leads including all lifts involved |
| 30 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 31 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerincharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 32 | Supplying, laying and fixing of 80 mm dia CPVC pipe (SDR-11), including all brass and plain threaded fittings, jointing, testing and commissioning, complete as per site requirements and as directed by the Engineer-in-Charge |
| 33 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineerincharge : Above 40 mm nominal bore |
| 34 | Proving and fixing the female brass threaded adapter of approved brand eith all necessary fittings. 50 mm dia |
| 35 | Proving and fixing the male brass threaded adapter of approved brand eith all necessary fittings. 50 mm dia Please Enable Macros to View BoQ information |
