Tender For Maintenance, Repairs And Execution Of Other Emergent Works Of Phe Sub-Division Kokernag (Stage-14Th) Section Larnoo 2026-27. Ceiling Cost Rs 2.75 Lacs
Tender Value
2.75 Lakhs
Estimated cost
Bid Submission
29 Apr 2026
0 days left
EMD
8250
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Larnoo → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance, Repairs And Execution Of Other Emergent Works Of Phe Sub-Division Kokernag (Stage-14Th) Section Larnoo 2026-27. Ceiling Cost Rs 2.75 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge:All kinds of soils |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soils |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil) |
| 4 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (ordinary rock |
| 5 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 6 | All kinds of soil : |
| 7 | ordinary rock |
| 8 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : |
| 9 | All kinds of soil : |
| 10 | Excavation in water bound macadam road including stacking of serviceable and unserviceable material separately and disposal ofunserviceable material lead upto 50 m and lift upto 1.5 m, disposedmaterial to be neatly dressed |
| 11 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 12 | 100 mm dia GI pipes |
| 13 | 80 mm dia GI pipes |
| 14 | 65 mm dia GI pipes |
| 15 | 50 mm dia GI pipes |
| 16 | 40 mm dia GI pipes |
| 17 | 25 mm dia GI pipes |
| 18 | 20 mm dia GI pipes |
| 19 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 20 | 25 to 40 mm nominal bore |
| 21 | 50 to 80 mm nominal bore |
| 22 | Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job |
| 23 | Hire charges of Hydraulic Excavator (JCB) with operator for emergent works during floods, frost or heavy rains as and when needed incl. operational charges and fuel for working hours involved. |
| 24 | Desilting of different hydraulic structures Viz SR's PST's , Clear Water Sumps etc incl disposal of excavted silt |
| 25 | Through Washout |
| 26 | Through Manual labours using rope and bucket |
| 27 | Fixing of M.S double collars/ arresting of leakages by way of welding including all sorts of carriages incl. cutting of available G.I pipes as per site requirement. |
| 28 | 80 mm dia |
| 29 | 100 mm dia |
| 30 | 150 mm dia |
| 31 | 200 mm dia |
| 32 | Providing / fixing of double collars, G.I./ M.S. for arresting of leakages by using lead & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) |
| 33 | 40 mm dia |
| 34 | 50 mm dia |
| 35 | 65 mm dia |
| 36 | 80 mm dia |
| 37 | 100 mm dia |
| 38 | 150 mm dia |
| 39 | 200 mm dia |
| 40 | Supply of unskilled labours |
| 41 | Supply of skilled labour |
| 42 | Hire charges of Welding machine with welder, gen set & helper including cost of electrods etc for welding of M.S Sheets , GI/ DI pipes etc including all carriages to & fro comp job. |
| 43 | Providing Inverter Welding Machine | MAG/MMA/TIG Lift | 200A Output | Electrodes 1.6-3.2mm & Flux Wire 0.8/0.9/1.0mm | Hot Start & Anti-Stick | Home/DIY/Workshop Use of approved brand ( Electrudes to be provided seperately) |
| 44 | Providing of Electrudes. |
| 45 | Dismantling C.I/DI pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer in-charge. (A) Including excavation and refilling trenches after taking out the pipes. |
| 46 | Upto 150 mm diameter |
| 47 | Above 150 mm diaupto 300 mm dia. |
| 48 | Above 300 mm diameter. |
| 49 | (B) Excluding excavation and refilling trenches after taking out the pipes. |
| 50 | Upto 150 mm diameter |
| 51 | Above 150 mm diaupto 300 mm dia. |
| 52 | Above 300 mm diameter. |
| 53 | Fixing charges of chain link fencing |
| 54 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. |
| 55 | Made of G.I. wire of dia 4 mm |
| 56 | Providing fixing & commissioning of 12 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever and carriages required .complete job |
| 57 | 80mm dia |
| 58 | 65mm dia |
| 59 | 50mm dia |
| 60 | Replacement of old damaged G.I. Gate valves by way of new Gate valves of reputed make including cost of nuts, bolts, rubber insulations of ISI marked standard make incl. all carriages upto site of works, complete.(The unserviceable material shall be returned to Divl. store under proper R.I) |
| 61 | 100 mm dia Gate valve |
| 62 | 80 mm dia Gate valve |
| 63 | 65 mm dia Gate valve |
| 64 | 50 mm dia Gate valve |
| 65 | 40 mm dia Gate valve |
| 66 | 25 mm dia Gate valve |
| 67 | 20 mm dia Gate valve |
| 68 | Hire charges of dewatering motor incl. cost of fuel & all carriges complete. |
| 69 | Re-threading of damaged pipe ends including carriage from site to workshop and back. |
| 70 | 20 mm dia |
| 71 | 25 mm dia |
| 72 | 40 mm dia |
| 73 | 50 mm dia |
| 74 | 65 mm dia |
| 75 | 80 mm dia |
| 76 | Restoration of damaged pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Upto 20mm to 100mm dia by using blue lamp including cost of K.oil) |
| 77 | Providing and fixing C.I. sluice valves class 1st (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paidseparately). |
| 78 | 100 mm dia |
| 79 | 125 mm dia |
| 80 | 150 mm dia |
| 81 | 200 mm dia |
| 82 | 250 mm dia |
| 83 | Providing and fixing of NRV Valves complete job |
| 84 | 25 mm dia Gun metal non return valve- |
| 85 | 32 mm dia Gun metal non return valve- |
| 86 | 40 mm dia Gun metal non return valve- |
| 87 | 50 mm dia Gun metal non return valve- |
| 88 | 65 mm dia Gun metal non return valve- |
| 89 | 80 mm dia Gun metal non return valve- |
| 90 | Providing of fire wood for defreezing/ insulator |
| 91 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 92 | Illumenation of Divisional/ Sub Divisional Buildings during Republic/ Independence Days |
| 93 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 94 | Supply of wire crates 4mm thick wire with mesh size 100x100,4mm wire |
| 95 | Supply of stones (Nallah Stones) in wire crates excluding cost of wire crates. |
| 96 | Empty Cement Poly Bags |
| 97 | Providing and fixing of Wire Mesh & Gratings > Metal Mesh > GI Wire MeshCold Rolled Mill Finish Galvanized Iron Square Welded Wire Mesh, of 25x25mm and 2mm thick. |
| 98 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (welded) |
| 99 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 100 | Providing of Medals for the distribution among Employies for extra ordinary work |
| 101 | Providing of momentoes10x12 inch for the distribution among Employies for extra ordinary work |
| 102 | Providing fixinfg of new nuts, bolts,washers etc. complete job including replacement of old |
| 103 | Hiring charges of canvas pipes for pump set including carriage complete job (100 ft of 75mm/100mm) |
| 104 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 105 | Dismantling G.I.pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 106 | Above 40 mm nominal bore |
| 107 | 15 - 40 mm nominal bore |
| 108 | 80-100mm dia D.I pipes |
| 109 | Above 100mm dia D.I pipes |
| 110 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 111 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. |
| 112 | 100 mm dia pipes |
| 113 | 125 mm dia pipes |
| 114 | 150 mm dia pipes |
| 115 | 200 mm dia pipes |
| 116 | 250 mm dia pipes |
| 117 | 300 mm dia pipes |
| 118 | Supply of oxygen cylender incl. all carriages upto the site of work (for clearance of blockages from pipe) |
| 119 | a. 20 pound Cylinder |
| 120 | b. 120 pound Cylinder |
| 121 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve |
| 122 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel only . The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve |
| 123 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve |
| 124 | Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job.(The job is to be paid as per actual details at site) |
| 125 | Providing lighting arrangements during night |
| 126 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 127 | P/F & Supply of 24 wt. LED of standard make |
| 128 | P/F & Supply of 9 wt. LED bulbs of standard make |
| 129 | P/F & Supply of flood lights at plant site of standard make |
| 130 | Supply of transformer oil incld. All carriages complete |
| 131 | Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job. |
| 132 | 10 KVA |
| 133 | 20 KVA |
| 134 | 25 KVA |
| 135 | 30 KVA |
| 136 | 40 KVA |
| 137 | 50 KVA |
| 138 | 3 phase Starter along with necessary wiring upto motor |
| 139 | Supply installation of 30 wt. Solar street lights with pole, 30Ah Lethyum battery and 75 wt Solar pannel |
| 140 | Cutting of Macadam (Bitiminous portion) incl. disposal of unservicable & making the same good with rich mix of cement concrete upto the depth of 0.30 M |
| 141 | Supply of rubber tubes (cycle rubber tubes) for cheaking of leakages incl. all carriages etc. complete job |
| 142 | Supply of Standard plastic chairs approved by Engineer incharge incld. All carriages complete |
| 143 | Supply of Standard Table approved by Engineer incharge incld. All carriages complete |
| 144 | Supply of Standard Chair approved by Engineer incharge incld. All carriages complete |
| 145 | Supply of 19.50 kg gass clynder incld. All carriages complete |
| 146 | P/f of Bib cock 15mm nominal size of brass complete |
| 147 | Supply of grass cutter of standard quality incld. All carriages complete |
| 148 | Supply of Tool Kit viz. wranch of different size, Plyer, Spanner set of standard quality incld. All carriages complete |
| 149 | Supply of Distiled water incld. All carriages complete |
| 150 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials viz tees, bends ,sockets,step collars etc made out of 6 mm thick M.S sheet including cost of Nuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job.(the item is to be paid in fitted and finished form) |
| 151 | Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit) |
| 152 | Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit) |
| 153 | Providing and fixing of pipe specials of approved make manufacture including cutting and threading the pipe and making long screws etc incl. all sorts of carriages involved complete. |
| 154 | 100 mm dia G.I. Union |
| 155 | 80 mm dia G.I. Union |
| 156 | 65 mm dia G.I. Union |
| 157 | 50 mm dia G.I. Union |
| 158 | 40 mm dia G.I. Union |
| 159 | 25 mm dia G.I. Union |
| 160 | 20 mm dia G.I. Union |
| 161 | 15 mm dia G.I. Union |
| 162 | 100 mm dia G.I. Elbow |
| 163 | 80 mm dia G.I. Elbow |
| 164 | 65 mm dia G.I. Elbow |
| 165 | 50 mm dia G.I. Elbow |
| 166 | 40 mm dia G.I. Elbow |
| 167 | 25 mm dia G.I. Elbow |
| 168 | 20 mm dia G.I. Elbow |
| 169 | 15 mm dia G.I. Elbow |
| 170 | 80 mm dia G.I. Nipple 6\\" |
| 171 | 65 mm dia G.I. Nipple 6\\" |
| 172 | 50 mm dia G.I. Nipple 6\\" |
| 173 | 40 mm dia G.I. Nipple 6\\" |
| 174 | 25 mm dia G.I. Nipple 6\\" |
| 175 | 20 mm dia G.I. Nipple 6\\" |
| 176 | 15 mm dia G.I. Nipple 6\\" |
| 177 | 100 mm dia G.I. equal Tee |
| 178 | 80 mm dia G.I. equal Tee |
| 179 | 65 mm dia G.I. equal Tee |
| 180 | 50 mm dia G.I. equal tee |
| 181 | 40 mm dia G.I. equal tee |
| 182 | 25 mm dia G.I. equal tee |
| 183 | 20 mm dia G.I. equal tee |
| 184 | 15 mm dia G.I. equal tee |
| 185 | 20x20x15 mm dia G.I. Tee |
| 186 | 25x25x20 mm dia G.I. Tee |
| 187 | 40x40x25 mm dia G.I. Tee |
| 188 | 50x50x40 mm dia G.I. Tee |
| 189 | 65x65x50 mm dia G.I. Tee |
| 190 | 80x80x65 mm dia G.I. Tee |
| 191 | 20x15 mm dia Socket/ Reducer |
| 192 | 25x20 mm dia Socket/ Reducer |
| 193 | 40x25 mm dia Socket/ Reducer |
| 194 | 50x40 mm dia Socket/ Reducer |
| 195 | 65x50 mm dia Socket/ Reducer |
| 196 | 80x65 mm dia Socket/ Reducer |
| 197 | 20x15 mm dia Elbow/ Reducer |
| 198 | 25x20 mm dia Elbow/ Reducer |
| 199 | 40x25 mm dia Elbow/ Reducer |
| 200 | 50x40 mm dia Elbow/ Reducer |
| 201 | 65x50 mm dia Elbow/ Reducer |
| 202 | 80x65 mm dia Elbow/ Reducer |
| 203 | P/F of washers/rubber insertions of different dias incl. all sorts of carriages complete.200/150/100/80/65/50mm dia |
| 204 | Supplying of spun yarn at site |
| 205 | Providing refreshment to the partcipants of the Indenpadnace Day , Republic day or other official Functions complette job including packing at venue with following Menu. |
| 206 | Water Bottle One litre |
| 207 | Water Bottle 500 ml |
| 208 | Water bollte 250 ml |
| 209 | Juice pack/ tin 100 ml to 180 ml of Standard Quality |
| 210 | Boiled Egg |
| 211 | Biscuit standard Quality of 50 g |
| 212 | Dal 50 g Pac |
| 213 | Banana |
| 214 | Butter Toastes each pair |
| 215 | Toastes without Butter each pair |
| 216 | Tea Sugar each Cup |
| 217 | Tea Namkeen each Cup |
| 218 | Normal Chicken Biryani/fried rice one plate for person |
| 219 | Rice Plate with Dal , vegetables & curd for each person |
| 220 | Rice Plate with vegetables, Single piece meat & curd for each person |
| 221 | Disposable glass |
| 222 | Tissue paper |
| 223 | Hire charges of water dispensor incl. all sorts of carriages involved to & fro. |
| 224 | Supplying of 20 ltr water bottle for dispenser |
| 225 | Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity and shall be paid as per actual details at site. |
| 226 | For 0.50 HP to 2.00 HP |
| 227 | For 3.00 HP to 5.00 HP |
| 228 | For 5.00 HP to 10.00 HP |
| 229 | Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job) |
| 230 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. |
| 231 | 5 KV to 10 KV |
| 232 | 10 KV to 20 KV |
| 233 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution incl. hire charges of all T&P complete job. |
| 234 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 235 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 236 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 237 | Providing and laying hand packed stone soling of suitable size nominal size including ramming and dressing including all leads lifts and all carriages complete. |
| 238 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 239 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 240 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 241 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 242 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 243 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 244 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 245 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 246 | Replacement /Providing/fixing of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes of ISI marked standard make incl cost of all fittings required and carriage complete. |
| 247 | 20 mm dia Gate valve |
| 248 | 25 mm dia Gate valve |
| 249 | 32 mm dia Gate valve |
| 250 | 40 mm dia Gate valve |
| 251 | 50 mm dia Gate valve |
| 252 | Providing/fixing of PVC pipes of ISI marked standard make incl cost of all fittings required and carriage complete. |
| 253 | 20 mm dia PVC pipe (B-class) |
| 254 | 25 mm dia PVC pipe (B-class) |
| 255 | 32 mm dia PVC pipe (B-class) |
| 256 | 40 mm dia PVC pipe (B-class) |
| 257 | 50 mm dia PVC pipe (B-class) |
| 258 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.incl. all sorts of carriages involved complete. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments. |
| 259 | 80 mm dia. Class 1 |
| 260 | 100 mm dia. Class 1 |
| 261 | 125 mm dia. Class 1 |
| 262 | 150 mm dia. Class 1 |
| 263 | 200 mm dia. Class 1 |
| 264 | 250 mm dia. Class 1 |
| 265 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work, Complete job |
| 266 | 200 mm dia |
| 267 | 150 mm dia |
| 268 | 100mm dia |
| 269 | 80mm dia |
| 270 | 50mm dia |
| 271 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport |
| 272 | Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms |
| 273 | Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms |
| 274 | Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms |
| 275 | Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms |
| 276 | Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms |
| 277 | Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 278 | Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 279 | Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km |
| 280 | Sand & Agg. 20 mm avg. lead of upto 01 Kms |
| 281 | Sand & Agg. 20 mm avg. lead upto 02 Kms |
| 282 | Sand & Agg. 20 mm avg. lead upto 03 Kms |
| 283 | Sand & Agg. 20 mm avg. lead upto 04 Kms |
| 284 | Sand & Agg. 20 mm avg. lead upto 05 Kms |
| 285 | Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 286 | Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 287 | Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km |
| 288 | 40 mm Agg. avg. lead of upto 01 Km |
| 289 | 40 mm Agg. avg. lead upto 2 Kms |
| 290 | 40 mm Agg. avg. lead upto 3 Kms |
| 291 | 40 mm Agg. avg. lead upto 4 Kms |
| 292 | 40 mm Agg. avg. lead upto 5 Kms |
| 293 | 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 294 | 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 295 | 40 mm Agg. avg. lead beyond 20 Kms per additional Km |
| 296 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour |
| 297 | Cement for an avg. lead upto 50 mtr. |
| 298 | Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 299 | Steel for an avg. lead upto 50 Mtr |
| 300 | Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 301 | Pipe for an avg. lead upto 50 Mtr |
| 302 | Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 303 | Sand & Agg.20mm for an avg. lead upto 50 Mtr |
| 304 | Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 305 | 40mm Agg. for an avg. lead upto 50 Mtr |
| 306 | 40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 307 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 308 | Foundations, footings, bases of columns etc. for mass concrete. |
| 309 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 310 | Columns, pillars, piers, abutments, posts and struts. |
| 311 | Suspended floors, roofs, landings, balconies and access platforms. |
| 312 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 313 | Clearing snow (without frost) from roads manually. |
| 314 | Snow depth upto 150 mm |
| 315 | Snow depth over 150 mm but upto 250mm |
| 316 | Snow depth over 250 mm but upto 350mm |
| 317 | Snow depth over 350 mm but upto 450mm |
| 318 | Snow depth over 450 mm but upto 550mm |
| 319 | Snow depth over 550 mm but upto 650mm |
| 320 | Snow depth over 650 mm but upto 750mm |
| 321 | Snow depth over 750 mm but upto 850mm |
| 322 | Snow depth over 850 mm but upto 950mm |
| 323 | Snow depth over 950 mm but upto 1050mm |
| 324 | Snow depth over 1050 mm but upto 1150 mm |
| 325 | Snow depth over 1150 mm but upto 1250 mm |
| 326 | Clearing snow (with frost) from roads, manually using picks and shovels; snow depth upto 150 mm |
| 327 | Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site |
| 328 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 329 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Water bound macadam road |
| 330 | Supplying/laying of GSB/ nallah muck incl. spreading, placing in position and all sorts of carriages involved.complete. |
| 331 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 332 | Repairs / replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessaries etc. incl all carrages complete job |
| 333 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 334 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 335 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 336 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 337 | Providing and fixing of PGI sheets for soffit including carraige all fixtures |
| 338 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 339 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 340 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 341 | Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job |
| 342 | 03 Pole 200 Amp. |
| 343 | 03 Pole 100 Amp. |
| 344 | 04 Pole 100 Amp. |
| 345 | Providing and Fixing of 7.5 H.P. Starter of ISI marked standard Make, the job includes dismantling of damaged /non functional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job. |
| 346 | Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones incl. successful testing, commissioning. All types of carriage complete |
| 347 | P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work |
| 348 | 25mm dia Air Valve |
| 349 | 20mm dia Air Valve |
| 350 | Removal of dead animals from off take points including disposal within 50 mts comp job |
| 351 | Supplying,laying and spresding of thick polythene sheets for protection of water leakage at head sites/offtake points during lean discharge incl. all sorts of carriages involved complete. |
| 352 | Opening out old wire crates those and re-binding after filling. |
| 353 | Filling empty cement bags with sand/ earth; including cost of sewing and strings; incl. cost of bags, Loading/Unloading sand/ earth filled bags lead upto 50m.( Earth or sand to be locally excavated within 50 Mts head load) incl. placing in position and all leads/ lifts complete. |
| 354 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively): |
| 355 | Slip clearance in ordinary soils disposal lead upto 50 m and lift upto 1.5 m |
| 356 | Silp clearance in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m |
| 357 | Supplying/laying of filter media from approved source Ganderbal duly screened, washed / sieved conforming to approved standards/specifications and laying in filter beds as per required grades including all carriages by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job. |
| 358 | Removing, washing of old filter media including washing of filter beds and laying of same in position complete job. |
| 359 | Supplying & fixing as per site requirement of Nylon rope of 10 mm dia of Standartd make including all carriages complete job |
| 360 | Providing/spreading of salt to be used during frost days incl. all carriages complete. |
| 361 | Repairing of Damaged 100KVA / 63 KVA oil filled transformers installed at site including replacement of worn out / damaged accessories and filling with fresh T-oil in place of old carbonised T-oil. The job also includes Skilled / unskilled labour charges and all sorts of carriages from site of work upto the workshop & back to actual site of work including uninstallation & installation at site & testing, successful commissioning complete job |
| 362 | HV Coils |
| 363 | LV Coils |
| 364 | Lethoride Paper |
| 365 | HT Insulation Paper |
| 366 | Hard Card Board |
| 367 | Glass Sleeves |
| 368 | Fiber Tubes |
| 369 | LT Bush Rods |
| 370 | HT Bush Rods |
| 371 | HT Bush |
| 372 | LT Bush |
| 373 | AI Thimble |
| 374 | Cotton tape/ Nawar |
| 375 | cork washers |
| 376 | Oil Seals |
| 377 | Cork Sheet |
| 378 | Insulating gum |
| 379 | Nuts & bolts |
| 380 | T.Oil |
| 381 | Clamps |
| 382 | Insulated cable 10mm ( Service line) |
| 383 | Insulated cable 16mm ( Service line) |
| 384 | Supplying/installation/testing & commisioning of Desludge motor (7.5 HP-80mm) 3-phase of Reputed/Standard Make incl. all sorts of carriages involved.complete job. |
| 385 | Supplying/installation/testing & commisioning of 3 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job. |
| 386 | Supplying/installation/testing & commisioning of 4 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job. |
| 387 | Supplying of electrodes of approved make (ISI marked) for departmental welding machine. |
| 388 | Supplyying/installation of foldable & reusable Canopy Box type stall with JJM logo for laboratory staff during various programmes (Block Divas,B2V,VBSY etc) incl. all carriages complete. |
| 389 | Providing installation of Flex printing sign board with frame as instructed by Engineer Engineer |
| 390 | Providing installation of Flex printing sign board without frame as instructed by Engineer Engineer |
| 391 | Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc. including copper thimbles, earth work excavation and filling for laying of cable complete. |
| 392 | Supply & installation of white board of required size with eassel & pointer incl. all carriages complete. |
| 393 | 4'x6' |
| 394 | 6'x8' |
| 395 | P/F of wood work in frames etc complete job (Imported Wood) |
| 396 | Wood work in doors, shutters, window panes panelled/glazed/glass paned etc incl tower bolts, brass handles etc complete job (Imported Wood,35 mm thick) |
| 397 | Providing fixing of ply wood of approved make and quality |
| 398 | 6 mm thick |
| 399 | 9 mm thick |
| 400 | 12 mm thick |
| 401 | Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet/patchy portion of plastered surfaces (two or more coats) |
| 402 | Finishing with epoxy paint one or two coats at all locations etc complete. |
| 403 | On Steel Work |
| 404 | On Concrete Work |
| 405 | Providing and applying fire retardent paint on cleaned surface (wood/ply) @ 3.5sqm per litre per coat incl preparation of surface |
| 406 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. (Havels Make ) |
| 407 | Lighting points |
| 408 | Heating points |
| 409 | Felling trees of girth ( measured at a hieght of 1 meter from the GL) incluiding cutting of trunk and branches removing the roots, stacking of serviceable material and disposal of unserviceable material |
| 410 | Beyond 30 cm girth upto and including 60 cm girth |
| 411 | Beyond 60 cm girth upto and including 120 cm girth |
| 412 | Beyond 120 cm girth upto and including 240 cm girth |
| 413 | Above 240 cm girth |
| 414 | Carriage of bleeching powder/itmes which are large in size by low in weight only by means of trips. |
| 415 | 1st 5Kms |
| 416 | beyond 5 - 10kms |
| 417 | beyond10-15kms |
| 418 | beyond15-20kms |
| 419 | beyond 20-25kms |
| 420 | beyond 25-30kms |
| 421 | beyond 30-40kms |
| 422 | beyond 40-50kms |
| 423 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1 1:3:6 or richer mix (i/c equivalent design mix) |
| 424 | 1:4:8 or leaner mix (i/c equivalent design mix) |
| 425 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 426 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge : in cement motar |
| 427 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : in cement motar |
| 428 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement motar |
| 429 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 430 | Providing and laying of baramullah slab of 75 to 100 mm thinck complete job . |
| 431 | Supply of Bib Cock / Taps (Brass type) of approved brand ISI mark as approved by Engineer In Charge Complete Job |
| 432 | Hard pipe threader Ratchet pipe dia Tool set (TAPARIA) (Incl.1/2'' 3/4'' & 1'') |
| 433 | Hard pipe threader Ratchet pipe dia Tool set (TAPARIA) (Incl.1.25'',1.5''& 2'') |
| 434 | 36'' Pipe wrench heavy duty sided (TAPARIA) |
| 435 | 24'' Pipe wrench heavy duty sided (TAPARIA) |
| 436 | 18'' Pipe wrench heavy duty sided (TAPARIA) |
| 437 | 14'' Pipe wrench heavy duty sided (TAPARIA) |
| 438 | 12'' Pipe wrench heavy duty sided (TAPARIA) |
| 439 | Warm Track Suits |
| 440 | Rain Coats fully waterproof (upper and Lower) |
| 441 | Umbrellas |
| 442 | Warm Socks long |
| 443 | Warm Shoes Waterproof (tracking type) |
| 444 | Pressure Cooker (Hawkins ) Stainless Steel |
| 445 | Rice Cooker 5.10 Lt |
| 446 | Cup set Bone China |
| 447 | Cello Tea Flask 2lt |
| 448 | Cello Tea Flask 5lt |
| 449 | Cutlery Set 24 Pieces |
| 450 | Rice Bowl (Big Size) Hot Box |
| 451 | Tea Pan Aluminium |
| 452 | Tray Big Size |
| 453 | Tray Medium Size |
| 454 | Providing 4inch output of approved or honda 6HP dewatering motore including 25 mtrs canvas pipe.for Kokernag town including all carriage and installation complete job. |
| 455 | Supply of blow lumps for defreezing of pipes during winter (gas or kerosene) |
| 456 | Supply of Kerosene incl. all sorts of carriage involved. |
| 457 | Supply of petrol incl. all sorts of carriage involved. |
| 458 | Clearing jungle including uprooting of rank vegetation grass, brush wood, trees and saplings of girth upto 30 cm measured at a hieght of 1 meter grom GL and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedApr 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender