|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | All kinds of soil |
| 5 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dial |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 12 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | Providing and Fixing of MS stand for water cooler made of MS angle 50x50x6mm with plate at bootom legs upto height of 1'-0'' etc comp in all respect at site. |
| 14 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 15 | 1:4 (1 cement: 4 fine sand) |
| 16 | Providing and fixing in position best indian make C.P. Jet alongwith flexible pipe complete in all respects of repue make to entire satisfaction of EIC |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 18 | 32 mm dia |
| 19 | Providing and fixing soil, waste and vent pipes : |
| 20 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 21 | 75 mm diameter : |
| 22 | Sand cast iron S&S pipe as per IS: 3989: (75 mm dia) |
| 23 | Providing and fixing heel rest sanitary bend as DSR. |
| 24 | 100 mm dia |
| 25 | Sand cast iron S&S as per IS - 3989 |
| 26 | Providing and fixing collar: |
| 27 | 100 mm |
| 28 | Sand cast iron S&S as per IS - 3989 |
| 29 | 75 mm |
| 30 | Sand cast iron S&S as per IS - 3989 |
| 31 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 32 | 100 mm inlet and 75 mm outlet |
| 33 | Sand cast iron S&S as per IS - 3989 |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 35 | 20 mm dia nominal bore |
| 36 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 37 | 20 mm dia nominal bore |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 39 | 20 mm dia nominal bore |
| 40 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). |
| 41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 42 | 20 mm nominal bore |
| 43 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 44 | 25 mm dia |
| 45 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 46 | 45 cm length |
| 47 | 15 mm nominal bore |
| 48 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 49 | 20 mm nominal bore |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 52 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 53 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 54 | With common burnt clay F.P.S. (non modular) bricks |
| 55 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 56 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
| 57 | 150 mm diameter |
| 58 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : |
| 59 | 150 mm diameter |
| 60 | Providing and Fixing of RCC MH cover & frame HD-20 circular with clear opening 560mm as per |
| 61 | HD 20 |
| 62 | 560 mm circular shape |
| 63 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 64 | Inside dimensions 600x 850 mm aline with three or more inlets : |
| 65 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 66 | Providing & fixing precast RCC road gully with frame in 1:2:4 with horizontal and vertical position (Size 21\\"X27'') complete in all respect. |
| 67 | Providing and fixing C.P. / Steel grating of approved quality and colour. Circular type 100 mm nominal dia Circular type . |
| 68 | 100 mm nominal dia |
| 69 | Providing and fixing of drinking water cooler suitable for operation on 230 volts+ 10% 50 cycle single phase AC supply storage type 380-400 litre capacity/ cooling capacity 150ltrs/hr make bluestar |
| 70 | Providing and fixing of water filter cum purifier including installation charges & of purifying capacity 3ltr/min make aquaguard/kent |
| 71 | Providing and Fixing of Voltage Stabilizers of Nominal output-230 Volts±10% Including cost of copper wire from stabilizer to AC unit with M.S. body of (powder coated), complete in all respects. Make:-Jewel/ V-guard/Deol. |
| 72 | 5 KVA capcity |
| 73 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC |
| 74 | Providing and Fixing of C.P. brass Bottle Trap of 190 mm long with both connecting legs for WHB of make Jaquar continental / cera / hindware / jal etc.as complete cost with all taxes & labour charges etc |
| 75 | Providing and fixing white vitreous china flat back half stall urinal of size 375 x 390 x 590 mm with fittings, standard size C.P. brass flush pipe, spreaders and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete in all respect to the entire satisfaction of EIC or same range of AORs of other approved make |
| 76 | Single half stall urinal |
| 77 | Providing and fixing of One piece floor mounted E.W.C. with other fittings including EWC,Cistern, Seat cover etc complete in all respect as suitable for actual site provision of HRB, of approved make CERA, HINDWARE, JAQUAR etc. or equivalent . |
| 78 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 79 | White Vitreous China Wash basin size 550x400 mm without a pair of 15 mm C.P. brass pillar taps |
| 80 | Providing and fixing of C.P. brass angle cock approved make jaquar continental / cera/ ess ess/ jal/ hindware etc. or equivalent complete cost with all taxes & labour charges etc. for kitchen,toilet and baths i.e.say 40 nos |
| 81 | Providing and fixing of C.P. brass Short body cock make jaquar continental / cera/ ess ess/ jal/ hindware etc. or equivalent complete cost with all taxes & labour charges etc. |
| 82 | Providing and fixing of C.P. brass Pillar cock of approved make jaquar continental/ cera/ ess ess/ jal/ hindware etc or equivalent complete cost with all taxes & labour charges etc. |
| 83 | Providing and Fixing of Towel Ring of approved make jaquar continental/ cera/ ess ess/ jal/ hindware etc. complete in all respects . |
| 84 | Providing and Fixing of Towel Rail 600mm long of approved make jaquar continental/ cera/ ess ess/ jal/ hindware etc. complete in all respects . |
| 85 | Providing and fixing of CP brass soap dish of approved Make jaquar continental/ cera/ ess ess/ jal / hindware etc. complete in all respects . jaquar continental/ cera/ ess ess/ jal/ hindware etc. |
| 86 | Providing and fixing Looking mirror of superior glass 5mm thick (of approved quality) complete with PVC Beeding of 1/4'' dia and thick hard board, fixed to wooden cleats and hook etc. complete at site. |
| 87 | P/F of C.P. Brass cups heavy duty comp. at site. ( As per CP fittings) |
| 88 | Providing and fixing MS girder 6\\"x3\\" ISI marked including priming, painting, welding and nut bolts as per requirement of site for PVC tank platform at terrace complete in all respect. |
| 89 | Providing and fixing MS sheet 5.0 mm or 10 guage including priming, painting, welding and nut bolts as per requirement of site for PVC tank platform at terrace complete in all respect. |
| 90 | Providing and fixing gun metal peet valve, ISI marked for pressure not less than 3kg/cm2 complete in all respects. Make : ISI Mark. |
| 91 | 15 mm nominal bore |
| 92 | Providing Drip Seal Joints to Sand Cast iron / Centrifugally cast (spun) iron pipes and fittings of : |
| 93 | diameter 100 mm |
| 94 | diameter 75mm |
| 95 | Providing and fixing square-mouth C.I. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type :With Sewer bricks conforming to IS : 4885 Please Enable Macros to View BoQ information |
