|
| 1 | Excavation in trenches in hard / dense soil n.exc. 1.5M wide and n.exc. 1.5M deep and getting out etc., complete all as specified and as directed. |
| 2 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5M etc., complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils etc., complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed. |
| 5 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40mm graded stone aggregate all as specified. |
| 6 | Dismantling stone slabs and tiles of any description or thickness laid in cement mortar bedded and aprons etc complete all as specified and directed. |
| 7 | M & L for PCC (1:2:4) type C-2 using 20mm graded stone aggregate as in padding on roof correction of slope complete all as specified. |
| 8 | M & L for 600 x 600 x 15mm thick coloured heavy duty vitrified exterior tiles as in floor set and jointed in cement slurry and pointed in coloured cement to match laid over 15 mm thick cement mortar in CM 1:4 complete all as specified and directed. |
| 9 | -Ditto- all as per item No. 8 above but as in skirting over 10mm thick rendering complete all as specified and as directed. |
| 10 | S & F in repairs PVC (SWR) floor trap, 100 mm with grating plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed. |
| 11 | Taking down eaves gutters and rainwater pipes (any size or pattern), or any PVC (SWR) pipe fixed in any position including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed. |
| 12 | S & F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and as directed. |
| 13 | S&F 110 mm PVC (SWR) bends (any radius), complete all as specified and as directed. |
| 14 | S & F PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 15 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge. |
| 16 | Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and and directed. |
| 17 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 19 | S&F for 150 mm long and 30/35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as directed. |
| 20 | S&F for 150mm long bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete all as directed. |
| 21 | S&F for 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled cast bolts &make with necessary scews etc complete all as spd and directed. |
| 22 | S&F for 140mm stainless steel stopper and Tongue anodized with hard drawn steel spring fixed in floor with necessary screws etc. single rubber stopper complete all as directed. |
| 23 | S&F for 300 mm long and 16 mm dia rod Matt finished stainless steel sliding doors bolts (ALDROP),with s.s nuts and screws etc. incl ISI Mark Complete all as directed. |
| 24 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 25 | S&F for 5mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sq.m in each pane etc., complete all as specified and as directed. |
| 26 | S&F for 5mm thick figured glass pin head type and glazing with oil putty in squares exc 0.5 sq.m in each pane etc., complete all as specified and as directed. |
| 27 | Supply only Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples for mosquito proofing complete all as specified |
| 28 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening etc., complete all as specified and as directed. |
| 29 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant |
| 30 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 31 | S&F for 100 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 32 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 33 | S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc all as directed. |
| 34 | S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed. |
| 35 | Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified and as directed. |
| 36 | M & L for providing, cement concrete with type BO 1:2:4 (12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 37 | M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc.10 cm in width and setting in cement mortar 1:6, etc., complete all as specified and as directed. |
| 38 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 39 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 40 | M & L preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed. |
| 41 | Supply only Liquid water proofing compound complete. |
| 42 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed. |
| 43 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements) etc., complete all as specified and as directed. |
| 44 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.(Note : Height of the bldg up to G+3 storey including necessary safety arrangements) etc., complete all as specified and as directed. |
| 45 | S&F Aluminium flat iron work in wind ties 40x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed.(Note :- Height of the bldg up to 15 mtrs including necessary safety arrangements) etc., complete all as specified and as directed. |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 47 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe.290.Gde-E-165 etc., complete all as specified and as directed. |
| 48 | S&F MS framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as directed. |
| 49 | S&F Framed work such as grills, gratings gates , etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 50 | Preparing new steel or iron Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 51 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 52 | S&F galvanised, 2 strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with provision of galvanised mild steel wire, staples or steel pins etc complete all as directed. |
| 53 | S&F 600/610 mm dia punched tape concertina coil as per IS: 4454 with galvanised coating and punched tape material as per IS:513 deep drawn quality with galvanised coating having medium barbs (bars length: 24+1mm, pitch between two barbs 35+1mm) fixed in position and secured to both sides of shaped angle iron post, stretched to a length of 6 to 8 mm to achieve 600/610mm dia, weighing 8 kg (+5% as in fencing to steel post and another coil/ MS ribs including fixing with special galvanised fasteners such as J clips C clips U clips all as specified and directed having 4 rings between angle iron frame of dia 1.40 mtr specified and as directed. |
| 54 | S&F for mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as directed. |
| 55 | Refixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as directed. Please Enable Macros to View BoQ information |
