|
| 1 | Earthwork in excavation by Manual means in trenches for foundation, drians, pipes, cables etc., not exceeding 1.5m in width and for shafts wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within lead of 50meters All kind of soil |
| 2 | Earthwork in excavation by mechanical means( hydraulic excavator) foundation trenches and drians,(not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within lead of 50meters All kind of soild |
| 3 | Dismantaling manually /mechanically including stacking of serviceable materialand disposal of unserviceable material within 50 meter lead .i)Bituminous Road |
| 4 | ii)Water Bound Macadam Road |
| 5 | Demolishing cement concrete manually /by mechanical means including disposal of material with 50mtrs as per the direction of engineer I/C a)1:3:6 or richer mix |
| 6 | b)1:4:8 leaner mix |
| 7 | Laying and fitting of GI pipes complete excluding cost of pipes and earthwork 15mm and 20mm dia .GI pipes |
| 8 | 25mm and 32mm dia G.I pipes |
| 9 | 40mm and 50mm dia G.I pipes |
| 10 | 65mm and 80mm dia G.I pipes |
| 11 | 100mm and 150mm dia G.I pipes |
| 12 | Providing and fixing G.I pipes complete with G.I fitting excluding trenching and refilling etc.(eternal work )15 mm dia .nominal bore |
| 13 | 20 mm dia .nominal bore |
| 14 | 25mm dia .nominal bore |
| 15 | Laying and fitting of HDPE pipes ((excluding cost of pipe)a)25mm dia |
| 16 | c)32mm dia |
| 17 | d)40mm dia |
| 18 | e)50mm dia |
| 19 | f)65mm dia |
| 20 | g)80mm dia |
| 21 | h)100 mm dia |
| 22 | Laying and fitting of HDPE compression coupler /jointer 110mm |
| 23 | Providing and fitting of HDPE MTA 50MM |
| 24 | Providing and fitting of GI union 15mm and 20mm dia GI pipes |
| 25 | 25mm and 32mm |
| 26 | 40mm and 50mm |
| 27 | 65mm and 80mm |
| 28 | 100mm and 150mm |
| 29 | Providing and fitting of G.I nipples 15mm |
| 30 | 100mm |
| 31 | Providing and fixing Gunmetal with wheel of approved quantitiy 63mm |
| 32 | Filling available excavated earth (excluding rock )in trenches ,plinth sides of foundation etc. layers not exceeding 20cm in depth ,consolidated each deposite layers lead upto 50m and lift upto 1.5 m |
| 33 | Disposal of surplus excavated earth complete job upto 1km by Mech Transport (carriage) |
| 34 | supply of fitter /Mazdoor/Mason etc. supply of fitter (2nd class ) |
| 35 | supply of labour (Mazdoor) |
| 36 | Supply of masson a)1st class |
| 37 | 2nd Class |
| 38 | Providing and making MDPE pipes preinsulated /MDPE consumer service connection HDPE /G.I pipe with the help of electrofusion machine MDPE specials like electrofusion TEE ,double compression elbow female threaded adapter with metal insert service saddle reducer etc.complete a)20mm dia MDPE pipe (50mm to 25mm dia ) |
| 39 | b)20mm dia MDPE pipe (110mm to 63mm dia ) |
| 40 | Providing and supplying and insulation of C.P brass tap |
| 41 | Providing and supplying and installation of pre insulated MDPE PIPE 20MM DIA |
| 42 | Providing and making MDPE pipes preinsulated /MDPE consumer service connection HDPE /G.I pipe with the help of electrofusion machine MDPE specials like electrofusion TEE ,double compression elbow female threaded adapter with metal insert service saddle (with road crossing ) |
| 43 | For connection of HDPE Pipe with out road crossing |
| 44 | Providing and laying in position specific grade excluding the cost of centreing and shuttring 1:2:4 20mm nominal size |
| 45 | Providing and laying in position specific grade of reinforced cement concrete excl.the cost of centering and shuttering 1:1.5:3 20mm N/S |
| 46 | Providing and fixing of 3 layer PPR pipe 50mm |
| 47 | Reinforced cement concrete work in walls any thickness incl.attached plaster 1:1.5:3 20mm N/S |
| 48 | Deployment of extra fitters /Mazdoor for restoration of damaged GI pipes on account of emergent nature of works |
| 49 | Carriage of departmental material from stacking placeto site of work average 500mtrs by head load (paid as per actual distance involved at site)a)GI Pipes and fitting . |
| 50 | b)cement |
| 51 | Steel |
| 52 | Providing and laying in position specific grade of reinforced cement concrete excl.the cost of centering and shuttering -all work upto plinth level 1:3:6(cement :3coarse sand 6graded stone aggregateof 20mm nminal size )crush |
| 53 | Providing and laying in position specific grade of reinforced cement concrete excl.the cost of centering and shuttering finishing and reinforcenment -all work upto plinth level 1:1.5:3(1cement :1.5coarse sand 3 graded stone aggregateof 20mm nminal size )crush |
| 54 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 55 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain windowsills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with1:2:4 (1 cement : 2:coarse sand(zone-III) : 4 graded stone aggregate 20 mmnominal size) |
| 56 | Centering and shuttering including strutting propping etc.and removal of form for a)Foundations footings,bases of column etc for mass concrete |
| 57 | b)Walls (any thickness )including attached pilasters,plinth and and string course etc. |
| 58 | c)Lintels ,beams, plinth beams girders bressumers and cantilevers. |
| 59 | d)Arches ,domes, valutsupto 6m span |
| 60 | Edges of slabs and breaks in floors,and walls under 20cm wide |
| 61 | Suspended floors roofs landing balconies and access plateform |
| 62 | Dry stone pitching (any thickness )excluding cost of stone :- on horizontal |
| 63 | 12mm cement plaster of mix 1:4 (1cement :4course sand |
| 64 | Cement concrete flooring 1:2:4 (1cement :2coarse sand :4 graded stone aggregate 20 mmnominal size) finished with a floating coat of neat cement slurry but excluding the cost of nosing of step etc complete 50mm thick with 20mm nominal size crush stone aggregate a)crushed. |
| 65 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required .In grating frames guard bar ,ladders railing ,brackets gates and smilar works, |
| 66 | 1.8m high fencing with 2.4m angle iron 50x50x6mm post placed every 3m centre to centre embeddded in cement concrete blocks ,every 15th post ,last but one end post and corner post shall be strutted on both sides and end post one side and provided with 12 horizontal wires of barbed wire 9.38 kgs per 100m (min )between tow posts fitted and fixed with GI staples turn buckles etc.complete (const of post struts ,earth work and concrete to be paid for separately )with G.I BARDED WIRE |
| 67 | Deployment of extra fitters /Mazdoor for restoration of damaged GI pipes on account of emergent nature of works a)fitter |
| 68 | b)Mazdoor |
| 69 | Carriage of sand ,Bajri, stones bricks/tilles from nearest source to site of work incl.loading ,unloading and stacking complete (paid as per actual distance involved at site)a)Sand average distance 15km |
| 70 | b)Bajri above 40mm average distance 15km |
| 71 | c)Bajri below 40mm average distance 15km |
| 72 | d)Stone average distance 15km |
| 73 | e)Bricks average distance of 10km |
| 74 | Dry Random rubble masonary with hard stone from nallah with bond stone |
| 75 | Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 gradedstone aggregate 20 mm nominal size) upto plinth level with :1 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 76 | Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position cement morter 1:3(1 cement : 3 coarse sand cost of required centring and shuttring and curing complete |
| 77 | Providing glass wool 50mm thick resin bonded density 24kg/ cum with chicken mesh bindind wire wrapping of polythene sheet (120GSM) AND ALUMINIMUN 24 GAUGE all round the pipe of various dia including cost of all labour charges complete job .Supplying ,laying ,fixing of 50mm thckness closed cell electrometric nitrite rubber /polythene of class o applied by suitable adhesive as per specification and as required complet in all respect . |
| 78 | Providingand fixing of pipe with heat wire cable all fixture adhesive clamps cost of material and labour complete job as per direction of engineer bin charge (quality not below denforcen crompton ,equivalent ) |
| 79 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS U V stabilized & anti -microbial fusion welded, having thermal stability for hot& cold water supply including all PP - R plain & brass threaded polypropylenerandom fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includestesting of joints complete as per direction of Engineer in Charge. PN-16 pipe, 25mm OD (SDR-7.4) |
| 80 | PN-16 pipe, 32mm OD (SDR-7.4) |
| 81 | PN-16 pipe, 40 mm OD (SDR-7.4) |
| 82 | PN-16 pipe, 50mm OD (SDR-7.4) |
| 83 | Excavating, supplying and filling of local earth (including royalty) by mechanicaltransport upto a lead of 5km also including ramming and watering of the earth inlayers not exceeding 20 cm in trenches, plinth, sides of foundation etc.complete |
| 84 | Lowering ,laying aligning ,fixing in position in pipe line ,sluice valve of approved make of following dia complete labour ,testing and commissioning aong with pipe line as per technical specification and asper direction of engineer class -II 100MM dia |
| 85 | 80mm dia |
| 86 | Supply of 1.5HP water lifting pump of approved make and branced (kirloskar ,cromton ,havells ) |
| 87 | Supply welder /welding sets /generator etc.(o1No for 01 day )A)Welder ) |
| 88 | Welding set including generator set for welding |
| 89 | Carriage of welding sets |
| 90 | Steel reinforcementfor RCC work including strightening ,cutting bending all complete above plinth level thermo- mechanically treated bars of grade fe -500D OR more |
| 91 | Extra labour enggaged for various events /function in leh (independence day ,Republicday etc Mazdoor (01 No for o1days) |
| 92 | Hire charges for engagement of 207 /foe carriage of labour and material |
| 93 | Dismentalling of old plaster |
| 94 | Engagement of JCB for restoration and diversion |
| 95 | Supply of HDPE pipe butt fusion welding machine (complete set heater ,trimer and clamps |
| 96 | supply of electrofusion machine of approved brand |
| 97 | Providing and fixing plain panelling with skirting chair rail and cornce with necessary screws, priming coat on unexposed surface etc. complete second class teak wood 12mm thick |
| 98 | providing and laying and fitting of MS Pipe complete 300 mm dia |
| 99 | Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)Second class teak wood-35mm |
| 100 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).Second class kail wood |
| 101 | Providing and fixing of polycarbnate fiber sheets with necessary screws all complete .12mm thick Please Enable Macros to View BoQ information |
