|
| 1 | Providing trench less cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road crossing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables. |
| 2 | Supply of street light electric meter of 8 Kw capacity three phase and providing connection of street lights with the meter, payment to contractor will made as per actual slip received from the UHBVN . |
| 3 | SITC of DIN Type Astronomical Digital Time Switch with 1 CO:Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 programs, 3 nos indication lamp with 1 nos toggle switch and 1 nos timer swicth with 5 years warrenty Make: LandT/Indi Asian/CandS |
| 4 | P and F Contactor as per NS MNX 125 with 5 years warranty Make: Make: Indo Asian/L and T/C and S |
| 5 | Supply of street light electric meter of 2 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN |
| 6 | Supply of mineral oxide based pigment (Iron Oxide), UV stable, alkali resistant and weatherproof, suitable for integrally coloured cement concrete, conforming to ASTM C-979, Fe As Fe203 :) 96.0 (%)Matter volation at 1050C : (1.0 (%)Water soluble salts :( 0.3 (%)Residule on 320mesh :( 0.3 (%)PH value : 3.0-7.0Oil absorption :15-25 (g/100g)Conductivity :(400 (us/cm)Tinting stregth : :98-102 (%)complete as approved by Engineer-in-Charge. |
| 7 | Credit of Existing old bituminous material received after milling of BM or PC (Unit = 100 Cum after taking 80% credit of mild/scarified material ) Updated |
| 8 | Supply of Square cross section light column made of M.S including laser cut design (~2150mm height M.S Laser cut) cladded with opal acrylic diffuser and additional post top head, Black in colour, coated for high corrasion resistance, silicon gasket, SS fastener, integral driver, GI pedestal mounting assumedly, IP-66, Ik=07 for complete light fixture. 360-degree light distribution in the column part provide ed with ~6W/m Vertical liner LED unit with 1X20W LED (4Nos.) 100lm/W with type-II Luminaire and low glare indirect line of vision, efficiency )85%. The vertical laser cut design to ~2150m in height above ground level, cross-section ~ 220X220mm, MS sheet thickness =3mm, Pre-wired with earth connection integral junction chambers for cable termination with four-way 32Amp heavy duty connector-1 No. SPMCB, drivers, fastener and all accessories. Total Height of pole 3450mm. |
| 9 | Providing and fixing 200mm Dia and One mtr Long Red Sand Stone bollard dully fixed at site complete all respect. |
| 10 | 5000 Watts Light Controlling Timer |
| 11 | 3mm White Acrylic Sheet 44%Light Transmission 040 |
| 12 | -Powder Nerolac/Asian or equivalent 80-120 micron thick |
| 13 | Zinc rich primer Nerolac/Asian Or equivalent 80-120 micron thick |
| 14 | 5mm Sun board White |
| 15 | 1.5 Watt Led Module Light |
| 16 | Item -Provision of JCB/Crane/Generator 60KVA (Total Mandas 42) 02 Nos for Approx. 21Hours including Fuel and Driver Expenses. |
| 17 | Pretreatment for powder coating with 10 tank process |
| 18 | 600 Watts Led Light Power Supply |
| 19 | Laser Cutting Design (Per Sqm) |
| 20 | Beautification and Construction of Footpath/ Cycle track, storm water line, Utility services and road, decorative lights etc. Malik petrol pump to Agrasen Chowk ward-15 MC Panipat. (ROW) Please Enable Macros to View BoQ information |
