Tender For Repair /Maintainance Of Pumps, Motors, Panels, Starters And Including Allied Works At Ge Dehu Road, Pune-Maharashtra

TDR : 55213309

Tender Notice
BOQ

2 Days Left

Pune , Maharashtra

Tender Brief : Tender For Repair /Maintainance Of Pumps, Motors, Panels, Starters And Including Allied Works At Ge Dehu Road

Document Fees
₹ 500 /-

EMD
₹ 80000.0 /-

Tender Value
₹ 40 Lakhs /-

Submission Date
15-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Disconnecting /dismantling /taking out the defective burnt out VT pump set (Moter/Pump) from jack well and transporting to shop including loading/unloading etc complete and reffixing again after necessary repair work of capacity 30/50 HP Vertical motor. The repair includes followingsa) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unservicable parts as required and directed.b) Reassembling the complete pump set and re-erection and re-installation at its original position as directedc) Testing and commissioning complete all as directed by Engr-in-Charge.Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A2) All new parts required will be measured and paid separately as supply only items.3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete.4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquanted with site conditions complete. 5)T&P , Transport etc incl in quated rate . 6) Location :Keniya Pump House and A-I Pump House
2	Supply for repair suction case bearing for 30 HP VT Pump set of Capacity 30 HP.Make: Jyoti
3	Supply for repair suction case bearing for 50 HP VT Pump set of Capacity 50 HP.Make:Jyoti
4	Supply for repair Impeller seal ring of Capacity 30 HP.Make:Jyoti
5	Supply for repair Impeller seal ring of Capacity 50 HP.Make:Jyoti
6	Supply for repair bowl bearing of Capacity 30 HP.Make:Jyoti
7	Supply for repair Bowl Bearing of Capacity 50 HP.Make:Jyoti
8	Supply for repair Bowl studs (SS) of Capacity 30 HP.Make:Jyoti
9	Supply for repair Bowl studs (SS) of Capacity 50 HP.Make:Jyoti
10	Supply for repair Line shaft coupling (SS) of Capacity 30 HP.Make:Jyoti
11	Supply for repair Line shaft coupling (SS) of Capacity 50 HP.Make:Jyoti
12	Suppy for repair Bearing holder assembly of Capacity 30 HP.Make:Jyoti
13	Supply for repair Bearing holder assembly of Capacity 50 HP.Make:Jyoti
14	Supply for repair Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Jyoti
15	Supply for repair Line shaft Bearing (Throdan type) of Capacity 50 HP.Make:Jyoti
16	Supply for repair Column studs /nut bolts (50 Nos) of Capacity 30/50 HP.Make:Jyoti
17	Supply for repair Stuffing box bush of Capacity 30 HP.Make:Jyoti
18	Supply for repair Stuffing box bush of Capacity 50 HP.Make:Jyoti
19	Supply for repair Latern Ring of Capacity 30/50 HP.Make:Jyoti
20	Supply for repair Water deflector of Capacity 30/50 HP.Make:Jyoti
21	Supply for repair Head shaft coupling of Capacity 30 HP.Make:Jyoti
22	Supply for repair Head shaft coupling of Capacity 50 HP.Make:Jyoti
23	Supply for repair Column pipe 150 mm of Capacity 30/50 HP.Make:Jyoti
24	Supply for repair Impeller adjusting nut with screw of Capacity 30/50 HP.Make:Jyoti
25	Supply for repair Impeller made out of MS with impeller key 30/50 HP complete all as directed
26	Supply for repair Strainer Assembly of Capacity 30/50 HP.Make:Jyoti
27	Supply for repair Bowl of Capacity 30 HP.Make:Jyoti
28	Supply for repair Bowl of Capacity 50 HP.Make:Jyoti
29	Supply for repair Impeller shaft of Capacity 30 HP.Make:Jyoti
30	Supply for repair Impeller shaft of Capacity 50 HP.Make:Jyoti
31	Supply for repair Impeller collect assemly of Capacity 30/50 HP.Make:Jyoti
32	Supply for repair Line shaft up to 1.5 mtr and replacement of the Line shaft coupling complete all as directed
33	Supply for repair NDE Bearing No 6307/C3 suitable for 30/50 HP Make SKF OR equivalent
34	Supply for repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30/50 HP.
35	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 120 LPS with head 100 mtr, motor capacity150 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Location: Keniya Pump House. Note:(i) Spare parts for repair/replace will measured in respective items as per site required
36	Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar.
37	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar
38	Supply Coupling Key Suitable for pump set Model no DSM 150/46 ,Kirloskar
39	Supply Key for Impeller SSuitable for pump set Model no DSM 150/46 ,Kirloskar
40	Supply Key for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Kirloskar
41	Supply Bolt for upper and lower half casing Suitable for pump set Model no DSM 150/46 ,Kirloskar
42	Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitable for DSM 150/46 ,Kirloskar
43	Supply Drain plug for casing suitablefor 150 HP pump . Suitable for DSM 150/46 ,Kirloskar
44	Supply Paper packing between lower and upper casing Key Suitable for pump set Model no DSM 150/46
45	Supply O ring for shast sleev Suitable for pump set suitable for Model no DSM 150/46 ,Kirloskar
46	Supply Wear Ring suitable for Pump set Suitable for pump set Model no DSM 150/46 ,Kirloskar
47	Supply Shoulder Ring in CI Suitable for pump set Model no DSM 150/46 150 HP
48	Supply Interstage Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar
49	Supply Lantern Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar
50	Supply DE ball bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar
51	Supply DE Bearing Cover Suitable for pump set Model no DSM 150/46 ,Kirloskar
52	Supply Cartridge for bearing, DE Suitable for pump set Model no DSM 150/46 ,Kirloskar
53	Supply NDE Bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar
54	Supply Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar
55	Supply Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar
56	Supply Bearing Cap Suitable for pump set Model no DSM 150/46 ,Kirloskar
57	Supply Bearing nut,Suitable for pump set Model no DSM 150/46 ,Kirloskar
58	Supply Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar
59	Supply stuffing box bush,Suitable for pump set Model no DSM 150/46 ,Kirloskar
60	Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar
61	Supply Air vent,Suitable for pump set Model no DSM 150/46 ,Kirloskar
62	Supply Hex screw for bearing cover,Suitable for pump set Model no DSM 150/46 ,Kirloskar
63	Supply Cylindrical pin,Suitable for pump set Model no DSM 150/46 ,Kirloskar
64	Supply Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Kirloskar
65	Supply Gland Packing,Suitable for pump set Model no DSM 150/46 ,Kirloskar
66	Supply Vent Valve,Suitable for pump set Model no DSM 150/46 ,Kirloskar
67	Supply Flexible ST Hose Pipe,Suitable for pump set Model no DSM 150/46 ,Kirloskar
68	Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Kirloskar
69	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP Pump Make=Kirloskar.Model No RKB-100/23E35. Location: Keniya Pump House
70	Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.
71	Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.
72	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar.
73	Supply Coupling Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
74	Supply Key for Impeller Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
75	Supply Key for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
76	Supply Bolt for upper and lower half casing Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.
77	Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor Model no- RKB-100/23E35,Make-Kirloskar.
78	Supply Draing plug for casing suitablefor 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar.
79	Supply Paper packing between lower and upper casing Key Suitable for pump setModel no- RKB-100/23E35,Make-Kirloskar.
80	Supply O ring for shast sleev Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.
81	Supply Wear Ring suitable for Pump set Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
82	Supply Shoulder Ring in CI Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
83	Supply Interstage Ring Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
84	Supply Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
85	Supply DE ball bearing Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
86	Supply DE Bearing Cover Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
87	Supply Cartridge for bearing, DE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
88	Supply NDE Bearing Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
89	Supply Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
90	Supply Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
91	Supply Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
92	Supply Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
93	Supply Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
94	Supply stuffing box bush,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
95	Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar
96	Supply Air vent,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
97	Supply Hex screw for bearing cover,Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.
98	Supply Cylindrical pin,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
99	Supply Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.
100	Supply Gland Packing,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.
101	Supply Vent Valve,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
102	Supply Flexible ST Hose Pipe,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
103	Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.
104	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP Pump Make=GRUNDFOS .Location :- Keniya Pump House.
105	Kit Chamber stack CRN155-4A,suitable for 75 HP centrifugal Pump,Make : Grand Force.
106	Mechanical Seal.uitable for 75 HP centrifugal Pump,Make : Grand Force.
107	Bulk Impeller 99262569,uitable for 75 HP centrifugal Pump,Make : Grand Force.
108	Shaft 99196563,uitable for 75 HP centrifugal Pump,Make : Grand Force.
109	Kit wear part,uitable for 75 HP centrifugal Pump,Make : Grand Force.
110	Kit Bearing,uitable for 75 HP centrifugal Pump,Make : Grand Force.
111	AIR &AF Charges,uitable for 75 HP centrifugal Pump,Make : Grand Force.
112	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 34 LPS with head 60/75 mtr, motor capacity 60 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 80/36. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 75 mtr, motor capacity 60 HP Pump Make=Kirloskar .Location :- MIDC Pump House.
113	Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36,Kirloskar
114	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36 ,Kirloskar
115	Supply Wear Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.
116	Supply Shoulder Ring in CI suitable for PUMP set,,suitable for Model No DSM/80/36,Make: Kirloskar.
117	Supply Interstage Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.
118	Supply Lantern Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.
119	Supply Gland suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.
120	Supply DE Bearing s,suitable for Model No DSM/80/36,Make: Kirloskar.
121	Supply NDE Bearing ,suitable for Model No DSM/80/36,Make: Kirloskar.
122	Supply Deep Groove Ball bearing suitable for 60 HP,,suitable for Model No DSM/80/36,Make: Kirloskar.
123	Supply ANG Contact Ball bearing,,suitable for Model No DSM/80/36,Make: Kirloskar.
124	Supply Bearing Cover,,suitable for Model No DSM/80/36,Make: Kirloskar.
125	Supply Cover NDE,,suitable for Model No DSM/80/36,Make: Kirloskar.
126	Supply Shaft Sleeve,suitable for Model No DSM/80/36,Make: Kirloskar.
127	Supply Key for Impeller,,suitable for Model No DSM/80/36,Make: Kirloskar.
128	Supply Key for Coupling,,suitable for Model No DSM/80/36,Make: Kirloskar.
129	Supply Key for Sleeve Nut,,suitable for Model No DSM/80/36,Make: Kirloskar.
130	Supply Shaft Sleeve Nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.
131	Supply Round Lock nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.
132	Supply Gland Packing,,suitable for Model No DSM/80/36,Make: Kirloskar.
133	Supply Vent Valve,,suitable for Model No DSM/80/36,Make: Kirloskar.
134	Supply Set of O Ring ,,suitable for Model No DSM/80/36,Make: Kirloskar.
135	Supply Flexible ST Hose Pipe,,suitable for Model No DSM/80/36,Make: Kirloskar.
136	Supply Ms stud and including replacement of CI gland ,suitable for Model No DSM/80/36,Make: Kirloskar.
137	Supply stuffing box suitable for nut and bolts,suitable for Model No DSM/80/36,Make: Kirloskar.
138	Supply Cooling PVC flexible of ,suitable for Model No DSM/80/36,Make: Kirloskar.
139	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No Model No K1225 Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP Pump Make=Kirloskar .Location :- A-2 Pump House.
140	Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model No K1225 Make : Kirloskar
141	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model No K1225 Make : Kirloskar
142	Supply Wear Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar
143	Supply Shoulder Ring in CI suitable for PUMP set,suitable for Model No K1225 Make : Kirloskar
144	Supply Interstage Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar
145	Supply Lantern Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar
146	Supply Gland suitable for Pump set,suitable for Model No K1225 Make : Kirloskar
147	Supply DE Bearing suitable for Model No K1225 Make : Kirloskar
148	Supply NDE Bearing suitable for Model No K1225 Make : Kirloskar
149	Supply Deep Groove Ball bearing suitable for Model No K1225 Make : Kirloskar
150	Supply ANG Contact Ball bearing,suitable for Model No K1225 Make : Kirloskar
151	Supply Bearing Cover,suitable for Model No K1225 Make : Kirloskar
152	Supply Bearing Cover NDE,suitable for Model No K1225 Make : Kirloskar
153	Supply Shaft Sleeve suitable for Model No K1225 Make : Kirloskar
154	Supply Key for Impeller,suitable for Model No K1225 Make : Kirloskar
155	Supply Key for Sleeve Nut,suitable for Model No K1225 Make : Kirloskar
156	Supply Shaft Sleeve Nut ,suitable for Model No K1225 Make : Kirloskar
157	Supply Round Lock nut,suitable for Model No K1225 Make : Kirloskar
158	Supply Gland Packing,suitable for Model No K1225 Make : Kirloskar
159	Supply Vent Valve,suitable for Model No K1225 Make : Kirloskar
160	Supply Set of O Ring ,suitable for Model No K1225 Make : Kirloskar
161	Supply Gland stuffing box suitable for nut and bolts suitable for Model No K1225 Make : Kirloskar
162	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP Pump Make=Kirloskaror equivalent.Location :- C-1 and C-2 Pump House,COD Depot,FAD Depot.
163	Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump15/20 HP set Make : Kirloskar OR Equivalent
164	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set 15/20 HPMake : Kirloskar OR Equivalent
165	Supply Wear Ring suitable for Pump set,suitable for Pump 15/20 HP Make : Kirloskar OR Equivalent
166	Supply Shoulder Ring in CI suitable for PUMP set 15/20 HP,suitable for Make : Kirloskar OR Equivalent
167	Supply Interstage Ring suitable for Pump set 15/20 HP,suitable for Make : Kirloskar OR Equivalent
168	Pump shaft Suitable for pump set 15/20 HP for Make : Kirloskar OR Equivalent
169	DE/NDE Bearing No 6306 suitable for Make : Kirloskar OR Equivalent
170	Shaft bush for 15/20 HP Pump including removal from the pumps,Make : Kirloskar OR Equivalent
171	Shaft coupling flexible type KC 276 FOR 15/20 HP Cappacity in repair and removal from pumps Make : Kirloskar OR Equivalent
172	Star Nuts for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent
173	Impeller for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent
174	Impeller wear ring Model no KDS 15/20 HPMake : Kirloskar OR Equivalent
175	Bearing housing.Model no KDS 15/20 HP Make : Kirloskar OR Equivalent
176	Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP Pump Make=Kirloskaror equivalent.Location :- COD Depot,FAD Depot.STP
177	Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump15/20 HP set Make : Kirloskar OR Equivalent
178	Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set 15/20 HPMake : Kirloskar OR Equivalent
179	Pump shaft Suitable for pump set 10 HP.Make : Kirloskar
180	DE/NDE Bearing of capacity 10 HP.Make : Kirloskar
181	Shaft bush for 10 HP Pump including removal from the pumps.Make : Kirloskar
182	Shaft coupling flexible type 10 HP Cappacity in repair and removal from pumps.Make : Kirloskar
183	Star Nuts for 10 HP Centrifugal pump Make : Kirloskar
184	Impeller for 10 HP Centrifugal pump.Make : Kirloskar
185	Disconnection the electric and pum connection and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing and painting with two cote of synthetic eanamel paint,complete suitable for Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC supply. (make : kirlosker )
186	All as item no 9 here in before but Squirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC supply. ( make : kirlosker )
187	All as item no 9 here in before but Squirrel cage electric motor of capacity 75/60 HP 3 phase 415 Volt AC supply. (make : kirlosker )
188	All as item no 9 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC supply. (make : kirlosker )
189	All as item no 9 here in before but Squirrel cage electric motor of capacity 15/20 HP 3 phase 415 Volt AC supply ( make : kirlosker )
190	All as item no 9 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC supply ( make : kirlosker )
191	All as item no 9 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC supply ( make : kirlosker )
192	Disconnection the electric and lifting the submersible pump from river bed,well and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing complete suitable for Submersible motor with pump of capacity 15 HP 3 phase 415 Volt AC supply.
193	All as item no-16 here in before but capacity of submersible pump 10 HP
194	Taking down the Slip ring assy complete with studs made out of copper suitable for 150 HP Capacity Motor and supply and fixing the same all as directed.
195	Taking down the Slip ring assy complete with studs made out of copper suitable for 120 HP Capacity Motor and supply and fixing the same all as directed.
196	Taking down the Slip ring assy complete with studs made out of copper suitable for 60 HP Capacity Motor and supply and fixing the same all as directed.
197	Taking down the Carbon bush holder made of bronze suitable for 150 HP Capacity Motor and supply and fixing the same all as directed
198	Carbon brushes holder made of bronze as per existing sizes per sample suitable for 120 HP Capacity Motor
199	Carbon brushes holder made of bronze as per existing sizes per sample suitable for 60 HP Capacity Motor
200	Taking down the unserviceable Fan Blade upto 20 HP Motor and supply fixing the same.
201	Taking down the unserviceable Fan Blade upto 30 HP Motor and supply fixing the same.
202	Taking down the unserviceable Fan Blade upto 60 HP Motor and supply fixing the same.
203	Taking down the unserviceable Fan Blade upto 100-150 HP Motor and supply fixing the same.
204	S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30 HP.
205	Supply and Fixing Pressure gauge (100 mm dial) with gunmetal/brass connection suitable range 0-10 Kg/Cm2 complete with isolation cock, fittings,fixing and testing and commissioning on pump delivery line as directed by Engineer In charge
206	Supply and Fixing Panel type analog ammeter (96 x 96 mm) suitable for pump motor current measurement , CT operated (0-100/5 A or suitable range) complete with current transformer , wiring , fixing ,testing and commissioning in pump control panel as directed by Engineer In charge
207	Supplying and Fixing Panel type analog voltmeter (96 x 96 mm) suitable for 0-500 V AC range complete with volt selector switch , wiring , fixing , testing and commissioning in pump control panel as directed by Engineer In Charge
208	Supply and Fixing Panel type analog ammeter (96 x 96 mm) suitable for pump motor current measurement , CT operated (0-200/5 A or suitable range) complete with current transformer , wiring , fixing ,testing and commissioning in pump control panel as directed by Engineer In charge
209	Supply and Fixing flexible coupling suitable for connecting pump (30-50 HP Pump) and Motor shaft complete with coupling hubs, rubber bushes/ spider nuts, bolts and key , properly aligned and installed for smooth trnasmission of between pump and motor , including all necessary accessories as required
210	Supply and Fixing flexible coupling suitable for connecting pump (100-150 HP Pump) and Motor shaft complete with coupling hubs, rubber bushes/ spider nuts, bolts and key , properly aligned and installed for smooth trnasmission of between pump and motor , including all necessary accessories as required
211	Supply and Fixing star delta starter of 415 V 3 Phase induction motor AC 3 duty complete with coil auxilary contacts terminals and mounting arrangement , suitable for 15 HP pump motor control panel including fixing on exisitng panel of same make and same rating as specified and directed
212	Supply and Fixing star delta starter of 415 V 3 Phase induction motor AC 3 duty complete with coil auxilary contacts terminals and mounting arrangement , suitable for 60 HP pump motor control panel including fixing on exisitng panel of same make and same rating as specified and directed
213	Supply and Fixing star delta starter of 415 V 3 Phase induction motor AC 3 duty complete with coil auxilary contacts terminals and mounting arrangement , suitable for 100 HP pump motor control panel including fixing on exisitng panel of same make and same rating as specified and directed
214	Supply and Fixing star delta starter of 415 V 3 Phase induction motor AC 3 duty complete with coil auxilary contacts terminals and mounting arrangement , suitable for 120 HP pump motor control panel including fixing on exisitng panel of same make and same rating as specified and directed
215	Supply and Fixing star delta starter of 415 V 3 Phase induction motor AC 3 duty complete with coil auxilary contacts terminals and mounting arrangement , suitable for 150 HP pump motor control panel including fixing on exisitng panel of same make and same rating as specified and directed
216	Supply and Fixing MCCB (Moulded Case Circuit Breaker) 100 A 4 Pole 415 V 50 HZ thermal magnetic release with adjustable overload and short circuit protection breaking minimum 25 KA suitable for installation in pump control panel / MCC panel including and fixing same make as specified and directed
217	Supply and Fixing MCCB (Moulded Case Circuit Breaker) 160 A 4 Pole 415 V 50 HZ thermal magnetic release with adjustable overload and short circuit protection breaking minimum 25-36 KA suitable for installation in pump control panel / MCC panel including and fixing same make as specified and directed
218	Supply and Fixing MCCB (Moulded Case Circuit Breaker) 250 A 4 Pole 415 V 50 HZ thermal magnetic release with adjustable overload and short circuit protection breaking minimum 25-36 KA suitable for installation in pump control panel / MCC panel including and fixing same make as specified and directed
219	Supply and Fixing MCCB (Moulded Case Circuit Breaker) 400 A 4 Pole 415 V 50 HZ thermal magnetic release with adjustable overload and short circuit protection breaking minimum 36 KA suitable for installation in pump control panel / MCC panel including and fixing same make as specified and directed
220	Supply and Fixing MCCB (Moulded Case Circuit Breaker) 630 A 4 Pole 415 V 50 HZ thermal magnetic release with adjustable overload and short circuit protection breaking minimum 36-50 KA suitable for installation in pump control panel / MCC panel including and fixing same make as specified and directed
221	Supply and Fixing Rotary selector switch 2/3 Position (Auto-Off- Manua/On-Off))suitable for 415 V control panel operation complete with contact blocks, knob and mounting arrangement including wiring and fixing as required Make : L&T/Schneider/Seimens/ABB or Equivalent
222	Supply and Fixning CT suitable for ammeter connection ratio required 100/ 5A,200/5A and 400 /5 A accuracy class 1.0 resin cast type complete with mounting and terminal connections for electric control panel as specified and directed
223	Supply and Fixing Electronic Timer suitable for star delta motor starter adjustable time range 0-30 Sec coil voltage 230 V AC complete with base and connections for pump motor starter panel as specified and directed
224	Taking up the unserviceable cable of any type,and supply , laying testing and commissioining of PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to3.5 x 50 sqmm include all accessories glands,copper lugs ,ferruling , dressing,clamping and termination as required Make : Polycab,Finolex,Havells
225	Taking up the unserviceable cable of any type,and Supplying , laying testing and commissioining of PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to3.5 x 70 sqmm include all accessories glands,copper lugs ,ferruling , dressing,clamping and termination as required Make : Polycab,Finolex,Havells
226	Taking up the unserviceable cable of any type,and Supplying , laying testing and commissioining of PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to3.5 x 25 sqmm include all accessories glands,copper lugs ,ferruling , dressing,clamping and termination as required Make : Polycab,Finolex,Havells
227	Taking down the unserviceable Starter from the existing panel and MU-G 15 DOL Star-Delta Starter for 10 HP squrrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent
228	Taking down the unserviceable Starter from the existing panel and MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent
229	4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 16A contactor Make: L & T/C&S/Havells or equivalent
230	4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 160A contactor Make: L & T/C&S/Havells or equivalent
231	4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 100A contactor Make: L & T/C&S/Havells or equivalent
232	S&F in repair Single phase preventor as reqd on site fpr protection of starter complete all as specified and directed Make: L & T/C&S/Havells or equivalent Please Enable Macros to View BoQ information
233	S&F in repair Single phase preventor as reqd on site fpr protection of starter complete all as specified and directed Make: L & T/C&S/Havells or equivalent Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Distribution and Conditioning Tenders

Pumps Tenders

Pump repair and Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair /Maintainance Of Pumps, Motors, Panels, Starters And Including Allied Works At Ge Dehu Road, Pune-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair /Maintainance Of Pumps, Motors, Panels, Starters And Including Allied Works At Ge Dehu Road, Pune-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us