|
| 1 | M & L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a tack coat of Bitumen VG-10 grade conforming to IS :73 at a rate of application of 5 kg/ 10 sqm complete all as specified and directed. |
| 2 | M & L for Bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.50% binder content (VG-30) Grade by weight of total mix, rolled and compacted to required camber and gradient with including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber complete all as specified and directed.Note :- Mixole/Mini plant at site/ Manual mixing with cold mix ashphalt due to cold weather/low temperature shall be use at site |
| 3 | M&L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like not less than 10 cm wide with roadmarking paint, white or golden yellow all as specified and directed. |
| 4 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per SSR or manufactures instructions complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified an directed. |
| 7 | Dismantaling brick work or stone/boulder masonery built in cement mortar including all quoins, pillars etc. complete all as specified and as directed |
| 8 | M & L for brick work in cement mortar 1:6 using old size bricks sub class 'B' bricks, straight or curved on plan exc. 6m mean radius complete all as specified and as directed. |
| 9 | M & L for rendering 15mm thick on concrete/ masonary surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M & L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc complete all as specified and directed. |
| 11 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed |
| 12 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Please Enable Macros to View BoQ information |
