|
| 1 | Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. |
| 3 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and fair etc. complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 4 | Supply only WPC complete all as specified and directed. |
| 5 | M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete surfaces on ceiling surfaces and finishing the surface even and smooth without using extra cement all as specified and as directed. |
| 6 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete. |
| 7 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound Distemper over a coat of primer complete. |
| 8 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound Distemper over a coat of primer complete. |
| 9 | M&L for Preparation of old plastered surfaces of walls incl washing rubbing down and stopping of distempered and painted and applying one coat of oil bound distemper on old decorated surfaces on walls incl filling of nail holes by cementious wall care putty all as specified and as directed. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 10 | All as per item No 9, but applying two coats of oil bound distemper |
| 11 | M&L for Preparation, complete removal of old treated surfaces of ceiling and applying one coats of distember oil emulsion, white or tinted, complete all as specified and directed. |
| 12 | M&L for providing and applying minimum 2 mm thick wall care putty over prepared surface (old and new plastered surface) and rubbing it with sand paper to achieve the surface even and smooth for further application of finishes complete all as specified and directed. (Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height complete all as specified and directed) |
| 13 | M&L for preparation of old decorated plastered or unplastered surfaces of walls incl cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 14 | M&L for preparation of old decorated plastered or unplastered surfaces of walls incl cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint complete all as specified and directed.The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 15 | M&L for preparation of old or previously treated steel surfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for preparation of old or previously treated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 17 | M&L for preparation of old or previously treated cemented surfaces of any description,not otherwise descri- bed over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 18 | M&L for one coat of exterior emulsion paint on old treated surface of wall preparation of plastered surface to make surface truely smooth complete all as specified and as directed by Engr-in-Charge. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 19 | M&L for two coat of exterior emulsion paint over a priming coat (as per manufactures instruction) on old treated surface of wall after complete removal of existing treatment including preparation of plastered surface and provision of 2mm thick wall putty in two layer to make surface truely smooth complete all as specified and as directed by Engr-in-Charge. |
| 20 | M&L for preparation of existing old treated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm width or girth by cleaning , removing dust and incl washing and cleaning etc to receive painting and applying one coats of roof paints ( coptic of Jenson & Nicholsan or Antisol of Berger) complete all as spd and directed The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 23 | M&L Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete. |
| 24 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 25 | Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 26 | S&F for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 27 | S&F for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 28 | S&F in repair 15mm dia bib tap long body CP, screwed for iron pipes complete all as specified and directed |
| 29 | S&F in repair angle cock 15 mm bore brass fancy type chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface |
| 30 | S&F in repair pillar taps 15 mm bore, brass chromium plated , screwed down high pressure with or without letter Hot or Cold with long screwed shanks and fly nut complete all as specified, fixed in repairs. |
| 31 | S&F in repair bib tap standard of PTMT (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath fitting), any colour, screwed foriron pipe 15 mm bore pipe (minimum weight 90 gm) all as specified, fixed in repairs |
| 32 | S&F in repair polymer white (polypropeylene Delrin and ABS) low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete, complete all as specified and directed. |
| 33 | S&F in repairs, 550x400mm vitreous China, wash hand basin , flat back excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed. |
| 34 | S&F in repair hot and cold single hole basin mixer brass chromium plated 15mm bore fixed as in repairs complete all as specified and directed. |
| 35 | S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . |
| 36 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers complete all as specified and directed |
| 37 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified |
| 38 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 39 | S&F in repairs of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 40 | S&F in repair one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge |
| 41 | S&F in repair Tubular Towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 42 | S&F in repair Soap dish CP complete all as specified and directed |
| 43 | S&F PVC WHB waste pipe 32/40 mm dia compolete all as specified |
| 44 | S&F in repair Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE. |
| 45 | S&F in repairs Chromium plated shower rose 125 mm swivel type |
| 46 | S & F in repair 25mm Dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified. |
| 47 | S & F in repair PVC connections 15mm dia , 600mm long, with PTMT nuts & washers at both ends |
| 48 | S&F in repair Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed |
| 49 | Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified. |
| 50 | M&L 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed. |
| 51 | S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified. |
| 52 | M&L 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified. |
| 53 | M&L for APP based polymeric membrane minimum weighing 3.00Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all specified. |
| 54 | M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified |
| 55 | S&F in repair rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 56 | S&F in repair rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 57 | S&F in repair 110 mm bore PVC rain water drain, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 58 | Demolition of brick work built in cement mortar all as specified |
| 59 | M&L for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
