|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair /Replacement pipe line control valve pumping system and switchgear installed at Command HQ Area, PB Enclave Alpha Mess PH, MT PH and Sappers Enclave under AOR of GE (Utilities) Udhampur Contract No: GE/U-25/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 50 to 60 HP complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 3 | Description all as per ser item No 1.00 here-in-before, but capacity 30 to 40 HP. |
| 4 | Description all as per ser item No 1.00 here-in-before, but capacity 15 to 20 HP. |
| 5 | Description all as per ser item No 1.00 here-in-before, but capacity 7.5 to 10 HP |
| 6 | S&F New parts for single/multistage pumps of capacity 50 to 60 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-charge. |
| 7 | Impeller, MOC: CI. |
| 8 | Pump shaft stainless steel shaft complete with check nut and keys |
| 9 | Tyre coupling/star coupling |
| 10 | Star /Tyre coupler made of steel |
| 11 | Gland cup |
| 12 | Shaft sleeves |
| 13 | Bearing housing |
| 14 | Casing housing |
| 15 | S&F New parts for single/multistage pump of capacity 30 to 40 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-charge. |
| 16 | Impeller, MOC: CI. |
| 17 | Pump shaft stainless steel shaft complete with check nut and keys |
| 18 | Tyre coupling/star coupling |
| 19 | Star coupler made of steel |
| 20 | Gland cup |
| 21 | Shaft sleeves |
| 22 | Bearing housing |
| 23 | Casing housing |
| 24 | S&F New parts for single/multistage pump of capacity 15 to 20 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-charge. |
| 25 | Impeller, MOC: CI. |
| 26 | Pump shaft stainless steel shaft complete with check nut and keys |
| 27 | Tyre coupling/star coupling |
| 28 | Star /Tyre coupler made of steel |
| 29 | Gland cup |
| 30 | Shaft sleeves |
| 31 | Bearing housing |
| 32 | Casing housing |
| 33 | S&F New parts for single/multistage pump of capacity 7.5 to 10 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-charge. |
| 34 | Impeller, MOC: CI. |
| 35 | Pump shaft stainless steel shaft complete with check nut and keys |
| 36 | Tyre coupling/star coupling |
| 37 | Star /Tyre coupler made of steel |
| 38 | Gland cup |
| 39 | Shaft sleeves |
| 40 | Bearing housing |
| 41 | Casing housing |
| 42 | Pump seal |
| 43 | Lathe/Machining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shfts required for proper setting and smooth functioning to achieve desired discharge of the pump for 50 to 60 HP pump complete all as specified and directed by Engineer-in-charge. |
| 44 | Description all as per ser item No 9.00 here-in-before, but capacity of 30 to 40 HP motor |
| 45 | Description all as per ser item No 9.00 here-in-before, but capacity of 15 to 20 HP motor |
| 46 | Description all as per ser item No 9.00 here-in-before, but capacity of 7.5 to 10 HP motor |
| 47 | Disconnecting electric connection of 50 to 60 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same complete all as specified and directed by Engineer-in-Charge.Note: (a) Rewinding of motor will be measured and paid separately under relevent item.(b) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed by Engineer-in-Charge. |
| 48 | Description all as per ser item No13.00 here-in-before, but capacity 30 to 40 HP motor |
| 49 | Description all as per ser item No13.00 here-in-before, but capacity of 15 to 20 HP motor |
| 50 | Description all as per ser item No13.00 here-in-before, but capacity of of 7.5 to 10 HP motor |
| 51 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 60/50/40/30/20/15/12/10/7.5 HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time, complete all as specified and directed by Engineer-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make. |
| 52 | Supply and fixing in repair/replacement of 2 to 3 HP pumpset (including motor) by taking out from foundation, dismounting from base channels, strip opening all parts, derusting, cleaning, overhualing, etc for complete repair/ replacement of spare parts such as impeller, shaft, winding, bearings, coupling, body, etc and after repair/ replacement, reassembling of pumpset mounting and fixing on base channel, recoupling of suction & discharge line, realignment, commissioning and testing complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing in repair/replacement of 0.5 to 1 HP pumpset (including motor) by taking out from foundation, dismounting from base channels, strip opening all parts, derusting, cleaning, overhualing, etc for complete repair/ replacement of spare parts such as impeller, shaft, winding, bearings, coupling, body, etc and after repair/ replacement, reassembling of pumpset mounting and fixing on base channel, recoupling of suction & discharge line, realignment, commissioning and testing complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for repair of booster pressure pumpset of cap 0.25 HP to 1 HP by taking out from foundation, dismounting from base channels, strip opening all parts, derusting, cleaning, overhualing, etc for complete repair, reassembling of pumpset mounting and fixing on base channel, recoupling of suction & discharge line, realignment, commissioning and testing complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing of relay switch for booster pressure pump of capacity 0.25 HP to 1 HP pumpset complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for dismantling following spare parts of submersible pump and motor of cap 1 to 5 HP and separating the unserviceable parts cleaning the serviceable parts, re-metalling machinery polishing and re-assembling including replacement of old parts and necessary painting complete all as specified and directed by Engineer-in-Charge. Note:- Old unserviceable parts replaced will be measured and paid separately. |
| 57 | M&L for Impeller for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 58 | M&L for Bush for impeller for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 59 | S&F of Pump bearing No. 6307 C3, complete all as specified and directed by Engineer-in-Charge. Make:-SKF/NBC/NRB or equivalent make |
| 60 | S&F of Pump bearing No. 6308 2RS1/C3, complete all as specified and directed by Engineer-in-Charge. Make:-SKF/NBC/NRB or equivalent make |
| 61 | S&F of Pump bearing No. 7308 2RS1/C3, complete all as specified and directed by Engineer-in-Charge. Make:-SKF/NBC/NRB or equivalent make |
| 62 | S&F of Motor bearing No. 6311, complete all as specified and directed by Engineer-in-Charge. Make:-SKF/NBC/NRB or equivalent make |
| 63 | S&F of Pump bearing No. 7311/ NU 411M, complete all as specified and directed by Engineer-in-Charge.Make:-SKF/NBC/NRB or equivalent make |
| 64 | S&F in replacement of ON load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engineer-in-Charge.Make : Havells/ L&T/ ABB |
| 65 | Description all as per ser item No 28.00 here-in-before, but of size 200 Amps. |
| 66 | Description all as per ser item No 28.00 here-in-before, but of size 100 Amps. |
| 67 | S&F in replacement of OFF load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engineer-in-Charge |
| 68 | Description all as per ser item No 31.00 here-in-before, but of size 200 Amps. |
| 69 | Description all as per ser item No 31.00 here-in-before, but of size 100 Amps. |
| 70 | Description all as per ser item No 31.00 here-in-before, but of size 63 Amps. |
| 71 | S&F in replacement of load line MCCB 320/350 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36 KA,Ics=100% Icu conforming to IEC - 60947-2 including taking down the old existing MCCB complete all as specified and directed by Engineer-in-Charge. Make : L&T/Legrand/ABB/Siemens |
| 72 | Description all as per ser item No 35.00 here-in-before, but of size 200 Amps. |
| 73 | Description all as per ser item No 35.00 here-in-before, but of size 160 Amps. |
| 74 | Description all as per ser item No 35.00 here-in-before, but of size 125 Amps. |
| 75 | Description all as per ser item No 35.00 here-in-before, but of size 100 Amps. |
| 76 | Description all as per ser item No 35.00 here-in-before, but of size 63 Amps. |
| 77 | S&F in replacement of power contactor 3 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 60 HP centrifugal pump set as per Havells cat part No. IHPHA100400* |
| 78 | M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 50 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engineer -in-charge. |
| 79 | Description all as per ser item No 42.00 here-in-before, but of size 25 sqmm |
| 80 | Description all as per ser item No 42.00 here-in-before, but of size 16 sqmm |
| 81 | M&L for copper thimble suitable for 50 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified & directed by Engineer-in-Charge. |
| 82 | Description all as per ser item No 45.00 here-in-before, but of size 25 sqmm |
| 83 | Description all as per ser item No 45.00 here-in-before, but of size 16 sqmm |
| 84 | M&L for aluminium thimble of 150 sqmm size for cables complete all as specified & directed by Engineer-in-Charge. |
| 85 | M&L for aluminium thimble of 95 sqmm size for cables complete all as specified & directed by Engineer-in-Charge. |
| 86 | S&F capacitor upto 40 mfd for motor complete all as specified & directed by Engineer-in-Charge. |
| 87 | S&F in replacement of booster pressure pump of capacity 1 HP pumpset complete all as specified and deposited Old booster pressure pump to MES store yard, complete all as specified & directed by Engineer-in-Charge. |
| 88 | M&L for replacement of monoblock pumpset, 1.5 HP, Single phase, 220 volts, Size 50 mm x 40 mm, Material: Cast iron, Head range: 12.8-17.6 mtr, Discharge: 4.15 lps, Class A, 2 Pole, S1 Duty Type, Speed 2900 RPM, Suface finish paint coated and deposited Old Monoblock pump to MES store yard, complete all as specified & directed by Engineer-in-Charge. |
| 89 | Supply and laying DWC (Double wall corruguated) pipe 40/32 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified & directed by Engineer-in-Charge. |
| 90 | Supply and laying DWC (Double wall corruguated) pipe 50/41 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified & directed by Engineer-in-Charge. |
| 91 | Supply and laying DWC (Double wall corruguated) pipe 75/63 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified & directed by Engineer-in-Charge. |
| 92 | Supply and fixing in replacement of terminal boxes suitable for 60/50 HP motor as per existing specification including taking down the old existing terminal box, complete all as specified & directed by Engineer-in-Charge. |
| 93 | Supply and fixing in replacement of terminal boxes suitable for 40/30/20 HP motor as per existing specification including taking down the old existing terminal box, complete all as specified & directed by Engineer-in-Charge. |
| 94 | M & L for painting of Header/ pump and motor, frame, pipe line including surface preparation by scrapping with emery paper and painting two coats of synthetic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction of Engineer in Charge |
| 95 | M&L for writing with brush about the machinery installed in different instalations such as Cap, discharge,MES No,Year of installation and head of the machinery on the wall in front of the pump motor with black paint including removing the existing paint with help of grinde, complete all as specified & directed by Engineer-in-Charge. |
| 96 | S&F in replacement of gland packing type 3 of size 8 mm made of asbestos grip with silicon complete all as specified & directed by Engineer-in-Charge. |
| 97 | Description all as per Ser item No 60.00 here-in- before, but of size 10 mm |
| 98 | Description all as per Ser item No 60.00 here-in- before, but of size 12 mm |
| 99 | Description all as per Ser item No 60.00 here-in- before, but of size 14 mm |
| 100 | Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for insulation purpose suitable for electrical shock safety of sizes 2 m x 1.2 m, complete all as specified & directed by Engineer-in-Charge. |
| 101 | S&F in replacement of MS stud bolts of existing size suitable for pumps and motors of various capacity installed at installations, complete all as specified & directed by Engineer-in-Charge. |
| 102 | S&F in replacement of grouting nuts and bolts of existing size suitable for pumps and motors foundation of various capacity installed at installations, complete all as specified & directed by Engineer-in-Charge. |
| 103 | M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base filling and mass concrete complete all as specified & directed by Engineer-in-Charge. |
| 104 | M&L for cement concrete in foundations, type E-2, 1:5:10 (40mm graded aggregate) as in filling and mass concrete complete all as specified & directed by Engineer-in-Charge. |
| 105 | Supply and fixing in repacement of Cast iron Foot valve Flanged with strainer of 150 mm dia including all types of fittings conforming to IS specification ccomplete all as specified & directed by Engineer-in-Charge. |
| 106 | Supply and fixing in repacement of Cast iron Foot valve Flanged with strainer of 100 mm dia including all types of fittings conforming to IS specification complete all as specified & directed by Engineer-in-Charge. |
| 107 | Supply and fixing in repacement of Cast iron Foot valve Flanged with strainer of 80 mm dia including all types of fittings conforming to IS specification complete all as specified & directed by Engineer-in-Charge. |
| 108 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temperature 30 to 120 degree celsius drop point 174 degree celsius, colour light fawn complete all as specified & directed by Engineer-in-Charge. |
| 109 | Supply only cotton waste coloured Grade \\"A' for cleaning rags in 25 Kgs bag complete all as specified & directed by Engineer-in-Charge. |
| 110 | S&F 3D signage board made of high quality plastic material with raised 3D letters supported with iron frame of size 4 mtr x 0.5 mtrs in Acrylic sheet moulded letters ALPHA MESS PUMP HOUSE Garrison Engineer (Utility) & B-Reserviour PUMP HOUSE Garrison Engineer (Utility) including MES logo printed on both side of name on the blue background with white colour of size 1x1 feet white in colour with good quality LED Strip including constant current electronic driver and making connection with suitable size copper conductor multistranded FRLSH wire including fixing on wall with clamps, complete all as specified and directed by Engr-in-Charge. Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete all as specified & directed by Engineer-in-Charge.Make of LED strip :-Philips,Wipro,Havells or equivalent |
| 111 | M&L for flex banner of size 1.5 mtr x 1 mtr supported with iron frame, about the Flow chart of distribution Network 1xALPHA MESS PH, 1xNCSR PH, 1xMT PH & 1xTHOMAS BRIDGE PH on the blue background with white colour including fixing on wall with clamps. Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete all as specified & directed by Engineer-in-Charge. |
| 112 | M&L for flex banner of size 1.0 mtr x 0.6 mtr supported with iron frame, about the machinery installed in different instalations such as Cap, discharge, MES No, Year of installation and head of the machinery on the blue background with white colour including fixing on wall with clamps. Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engineer-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete all as specified & directed by Engineer-in-Charge. |
| 113 | M&L for flex banner supported with iron frame of size 1.5 mtr x 0.3 mtr, about the Name of Pump house ALPHA MESS PH,NCSR PH, MT PH, Thomas Bridge PH, Bikram Encalve PH & NSOI Swimming Pool PH including MES logo printed on both side of name, on the blue background with white colour including fixing on wall with clamps and fixing of 30w Flood Light over the banner. the quoted rate included all the items required the fixing banners on Each Installations. Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete all as specified & directed by Engineer-in-Charge. |
| 114 | Supply only Electrical Insulation Tape roll Thickness: 0.18 mm, Width: 19 mm, Length: 20 mtr complete all as specified & directed by Engineer-in-Charge. |
| 115 | Supply only Nylon Trimmer Line Wire for Bruss Cutter Trimmer Thickness: 3 mm, Length: 200 mtr complete all as specified & directed by Engineer-in-Charge. |
| 116 | Supply and laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 95 sqmm 3.5 core laid in trenches,ducts, pipes complete all as specified & directed by Engineer-in-Charge. |
| 117 | M&L for brick/ stone masonary valve pit chamber of size 1.0 mtr x 1.0 mtr x 0.6 mtr internal dimension) with 3.15 mm thick MS cover including 50 x 50 x 6 mm angle iron frame with 100mm hinges embedded in coping with locking arrangement and painting the MS surfaces with two coat of redoxide primer & syntheatic enamel paint. The chamber shall be of PCC 1:4:8 type D2 40mm graded aggregate for foundation, brick work in cement mortar, 75mm PCC coping with PCC 1:3:6 type C1, 15 mm thick plastering in cement mortar 1:4 including necessary excavation, earth work and colour washing internally and externally surfaces complete all as specified & directed by Engineer-in-Charge. |
| 118 | Earthing of machinery/equipment Installed at power house/substation with galvanised steel earth plate electrode 600 mm × 600 mm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32× 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 119 | Opening, maintenance and general servicing of Servo voltage stablizers of 100 KVA including removal of sludge from disserstate coils, buck boost transformers, tightening of all nut bolts, cleaning of stablizers coils, checking and servicing of servo mechanism, gear synchronising system, automatic voltage regulator circuits and other allied electrical components complete all as specified & directed by Engineer-in-Charge.Note : Rate quoted by contractor is inclusive of following items:-(a) Servo motor with RC network having torque upto 3 kg/cm - 01 Nos(b) Servo motor with RC network having torque upto 10 kg/cm - 01 Nos(c) Electronic cntrol card for automatic voltage regulation - 01 Nos(d)Transformer oil -35 ltrs(e) Voltmeter 0-500 volt capacity - 01 Nos(f) Ammeter CT Operated - 01 Nos(g) Circuit plate 100 KVA - 01 Nos(h) Pulse transformer of cap 100 KVA - 01 Nos(i) Rewinding for copper coil -25 Kg(j) Shifting of stablizer from AOR of AGE Water supply to workshop (Tro/ Fro)(f) Items like carbon bush, push buttons auto/manual/micro press switch, indicator lamps, etc |
| 120 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil. complete all as specified & directed by Engineer-in-Charge. |
| 121 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete all as specified & directed by Engineer-in-Charge. |
| 122 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete, all as specified and directed by Engineer-in-Charge |
| 123 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified & directed by Engineer-in-Charge. |
| 124 | Description all as per Ser item No 87.00 here-in-before, but of size 100 mm dia |
| 125 | Description all as per Ser item No 87.00 here-in-before, but of size 80 mm dia |
| 126 | Description all as per Ser item No 87.00 here-in-before, but of size 50 mm dia |
| 127 | Description all as per Ser item No 87.00 here-in-before, but of size 40 mm dia |
| 128 | Description all as per Ser item No 87.00 here-in-before, but of size 25 mm dia |
| 129 | Description all as per Ser item No 87.00 here-in-before, but of size 20 mm dia |
| 130 | Description all as per Ser item No 87.00 here-in-before, but of size 15 mm dia |
| 131 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified & directed by Engineer-in-Charge. |
| 132 | Description all as per Ser item No 95.00 here-in-before, but of size 100 mm dia |
| 133 | Description all as per Ser item No 95.00 here-in-before, but of size 80 mm dia |
| 134 | Description all as per Ser item No 95.00 here-in-before, but of size 50 mm dia |
| 135 | Description all as per Ser item No 95.00 here-in-before, but of size 40 mm dia |
| 136 | Description all as per Ser item No 95.00 here-in-before, but of size 25 mm dia |
| 137 | Description all as per Ser item No 95.00 here-in-before, but of size 20 mm dia |
| 138 | Description all as per Ser item No 95.00 here-in-before, but of size 15 mm dia |
| 139 | Refixing GI/CI pipe obtained from Item No. 81 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified & directed by Engineer-in-Charge. |
| 140 | Description all as per Ser item No 103.00 here-in-before, but of size 100 mm dia. |
| 141 | Description all as per Ser item No 103.00 here-in-before,but of size 80 mm dia. |
| 142 | Description all as per Ser item No 103.00 here-in-before,but of size 50 mm dia. |
| 143 | Description all as per Ser item No 103.00 here-in-before,but of size 40 mm dia . |
| 144 | Description all as per Ser item No 103.00 here-in-before,but of size 25 mm dia. |
| 145 | Description all as per Ser item No 103.00 here-in-before,but of size 20 mm dia. |
| 146 | Description all as per Ser item No 103.00 here-in-before,but of size 15 mm dia. |
| 147 | Supply and fix in replacement cast iron sluice valve suitable of size 300 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engineer-in-Charge.. |
| 148 | Description all as per Ser item No 111.00 here-in-before, but of size 200 mm dia |
| 149 | Description all as per Ser item No 111.00 here-in-before, but of size 150 mm dia |
| 150 | Description all as per Ser item No 111.00 here-in-before, but of size 100 mm dia |
| 151 | Description all as per Ser item No 111.00 here-in-before, but of size 80 mm dia |
| 152 | Supply and fix in replacement of cast iron non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing, complete all as specified and directed by Engineer-in-Charge. |
| 153 | Description all as per Ser item No 116.00 here-in-before, but of size 100 mm dia. |
| 154 | Description all as per Ser item No 116.00 here-in-before, but of size 80 mm dia. |
| 155 | Supply and fix Foot Valve of size 80 mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply and fix Foot Valve of size 50 mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia as per IS 14845 including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down complete, complete all as specified and directed by Engineer-in-Charge. |
| 158 | Description all as per Ser item No 121.00 here-in-before, but of size 80 mm dia. |
| 159 | Repair to old sluice valve of size 300 mm dia for check nut, spindle, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engineer-in-Charge. |
| 160 | Description all as per Ser item No 123.00 here-in-before, but of size 200 mm dia |
| 161 | Description all as per Ser item No 123.00 here-in-before, but of size 150 mm dia |
| 162 | Description all as per Ser item No 123.00 here-in-before, but of size 100 mm dia |
| 163 | Description all as per Ser item No 123.00 here-in-before, but of size 80 mm dia |
| 164 | Supply and fixing MS ERW pipe of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 6 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 03 nos inlets (3x 150 mm ) from pump side and 05 outlets from distribution side ( 02 x 150mm,03 x100 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 165 | Mounting of header at a height of 1.2 metre above the ground level on PCC pillar of dimension 0.5x0.5x1.8 meter (0.6 meter depth & 1.2 meter height above ground) are as under the followings. |
| 166 | Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of GI/CI pipes and getting out in hard / dense soil complete all as specified and directed by Engineer-in-Charge. |
| 167 | Returning filling in and including spreading, levelling,watering and well ramming in layers not exceeding 25 cm. complete all as specified and directed by Engineer-in-Charge. |
| 168 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting piont complete all as specified and directed by Engineer-in-Charge. |
| 169 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engineer-in-Charge. |
| 170 | M&L for RCC foundation, M-25 type (using 20 mm graded aggregates) including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 171 | M&L for RCC Column, M-25 type (using 20 mm graded aggregates) complete all as specified and directed by Engineer-in-Charge. |
| 172 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge. |
| 173 | Grouting of nut bolts in the PCC pillar to support the header on both side with clamps complete all as specified and directed by Engineer-in-Charge. |
| 174 | M&L for repair to leaking GI pipe line of size 50 mm to 80 mm bore by providing necessary fitting such as socket, Tee, Elbow,etc including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and any depth complete all as specified and directed by Engineer-in-Charge.Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra pipe will be measured and paid separately. |
| 175 | Description all as per Ser item No 130.00 here-in-before, but of size 20 mm to 40 mm bore pipe. |
| 176 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engineer-in-Charge.Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra pipe will be measured and paid separately.. |
| 177 | Description all as per Ser item No 132.00 here-in-before, but of dia 250 to 300 mm bore pipe |
| 178 | M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engineer-in-Charge. |
| 179 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engineer-in-Charge. |
| 180 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engineer-in-Charge. |
| 181 | Supply and laying or fixing or passing through pipe, PVC insulated heavy duty industrial cables 2 core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 2.5 sqmm (in replacement) & taking out old cable complete all as specified and directed by Engineer-in-Charge.Note :Excavation, earthwork, Pipe for cable protection, etc to be measured and paid for separately. |
| 182 | Supply and fixing the nipple brass nozzle as per sample including removal of existing unsv one complete all as specified and directed by Engineer-in-Charge. |
| 183 | Supply & Laying multicore PVC insulated and FR-LHS PVC round sheatehed, copper conductor(flexible) industrial cable 1100 volt grade confirming to Is 694 , 1.5 sqmm 1 core including suitable size PVC conduit laid complete all as specified and directed by Engineer-in-Charge. |
| 184 | Description all as per Ser item No 139.00 here-in-before, but of size 2.5 sqmm 1 core. |
| 185 | Supply & laying of flexible pipe of 15/20 mm dia used for wiring purpose complete all as specified and directed by Engineer-in-Charge. |
| 186 | Supply and fix in replacement of PVC Foot valve of of size 110 mm dia PN 16 complete all as specified and directed by Engineer-in-Charge. |
| 187 | Providing & fixing 100mm dia bourden type, stainless steel dial type pressure Gauge (0 - 14 Kg) range, 4\\" BSP bottom entry on pump delivery line complete with ball valve (Glycerin based) complete all as specified and directed by Engineer-in-Charge. |
| 188 | S&F cast iron fittings for spigot and socket ends for pressure pipe for water mains such as bends, tapers, tee pieces single branch, cross collar, caps and plugs suitable for upto 150 mm bore, all specifications as per IS-1538 (Pt-1 to 23)-1976 and complete all as specified and directed by Engineer-in-Charge. |
| 189 | Supply fabrication and fixing MS joints like Flanged, bends, Tee, Tapers, collars, elbow, tail piece (any type) caps, plugs for 80 mm to 300 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 190 | S&F of Gun metal, globe or gate valves, 80mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified and directed by Engineer-in-Charge. |
| 191 | S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified and directed by Engineer-in-Charge. |
| 192 | Description all as per Ser item No 147.00 here-in-before, but size upto 40 mm bore. |
| 193 | Description all as per Ser item No 147.00 here-in-before, but size upto 25 mm bore. |
| 194 | Description all as per Ser item No 147.00 here-in-before, but size upto 20 mm bore. |
| 195 | Description all as per Ser item No 147.00 here-in-before, but size upto 15 mm bore. |
| 196 | Supply and fixing GI fittings medium grade ISI marked including complete all as required at site complete all as specified and directed by Engineer-in-Charge. |
| 197 | Elbow 15mm |
| 198 | Elbow 20mm |
| 199 | Elbow 25mm |
| 200 | Elbow 40mm |
| 201 | Elbow 50mm |
| 202 | Elbow 80mm |
| 203 | Socket 15mm |
| 204 | Socket 20mm |
| 205 | Socket 25mm |
| 206 | Socket 40mm |
| 207 | Socket 50mm |
| 208 | Socket 80mm |
| 209 | Union 15mm |
| 210 | Union 20mm |
| 211 | Union 25mm |
| 212 | Union 40mm |
| 213 | Union 50mm |
| 214 | Union 80mm |
| 215 | Elbow reducer 20 x 15mm |
| 216 | Elbow reducer 25 x 20mm |
| 217 | Elbow reducer 40 x 25mm |
| 218 | Socket reducer 25x20mm |
| 219 | Socket reducer 40x25mm |
| 220 | Socket reducer 40x20mm |
| 221 | Socket reducer 50x25mm |
| 222 | Nipple 15 x50mm |
| 223 | Nipple 15 x100mm |
| 224 | Nipple 20 x50mm |
| 225 | Nipple 20 x100mm |
| 226 | Nipple 25 x 50mm |
| 227 | Nipple 25 x 100mm |
| 228 | Nipple 40 x 50mm |
| 229 | Nipple 40 x 100mm |
| 230 | Nipple 50 x 50mm |
| 231 | Nipple 50 x 100mm |
| 232 | Tee 15mm |
| 233 | Tee 20mm |
| 234 | Tee 25mm |
| 235 | Tee 20x15mm |
| 236 | Tee 25x20mm |
| 237 | Tee 40x15mm |
| 238 | Tee 40x20mm |
| 239 | Tee 40x25mm |
| 240 | Tee 50x25mm |
| 241 | Dead plug 15mm |
| 242 | Dead plug 20mm |
| 243 | Dead plug 25mm |
| 244 | Dead plug 40mm |
| 245 | Dead plug 50mm |
| 246 | lead wool Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
