|
| 1 | Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed. |
| 2 | M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps. |
| 3 | All as per the description of srl item No 02 here-in-before but one fan point controlled by one, one way switch 06 Amps. |
| 4 | All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. |
| 5 | All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. |
| 6 | All as per the description of srl item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 7 | S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete |
| 8 | S&F bell push, flush type, 06 Amps, 230 volts with switch frame complete |
| 9 | S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete |
| 10 | S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete |
| 11 | S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete |
| 12 | S&F ding dong bell, AC, 230 volts, single pole complete |
| 13 | S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, 100 watts complete |
| 14 | S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete |
| 15 | S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete |
| 16 | S&F in repair Decorative aesthic design mirror luminaire copper antique / brass finish 15 wattt with all accessories prewired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. |
| 17 | S&F in repair on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. Make : Wipro / Philips/ Havells |
| 18 | S&F in repair decorative wall mounting light MS/Glass E-27 Base, lamp holder, including 9 Watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete. Make : Wipro / Philips/ Havells |
| 19 | Supply and fixing in repair 15 Watt round LED panel recess/surface mounting downlight in CDL with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed. Make : Wipro / Philips/ Havells |
| 20 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed. Make : Havells / Orient /Crompton |
| 21 | Supply and fix in repair exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed. Make : Havells / Orient /Crompton |
| 22 | Supply and fix in repair electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed (Note : Old/ unsvGeysers to be deposited in MES store) Make :- Bajaj Eternal Series-Pentacle dici/ AO Smith SDS Green- O25/ Havells Adonia plus |
| 23 | Supply, Installation, Testing and Commissioning in repair of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed. Make: Havells Model No Efficiencia Neo (BLDC 26W )/ Orient Model No. AEON/ Crompton Model No. Energion HS |
| 24 | Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. |
| 25 | All as per the description of srl item No 24 here-in-before but 06 Sqmm nominal cross sectional area and including continuous earth wire of size 06 Sqmm nominal cross sectional area. |
| 26 | All as per the description of srl item No 24 here-in-before but 10 Sqmm nominal cross sectional area, four single core, with and including continuous earth wire of size 10 Sqmm nominal cross sectional area. |
| 27 | S&F in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete |
| 28 | S&F in repair sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 12 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete |
| 29 | S&F in repair MCB, SP, AC, 230 volts of 06 to 32 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 30 | All as per the description of srl item No 29 here-in-before but SPN 16-40 AMP |
| 31 | S&F in repair MCB, DP, AC, 230 volts of 63 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 32 | Supply only for ball bearing number of 6201 to 6204 as required for fan complete (Make : SKF/NBC) |
| 33 | Supply only rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan |
| 34 | Supply only capacitor 0.8/1 Mfd, 240 Volts.(Make/Model- as per sample) |
| 35 | Supply only capacitor 2.5 Mfd, 240 Volts.(Make- Tibcon/Havells/Epico) |
| 36 | All as per the description of srl item No 35 but 3.15 Mfd. |
| 37 | Supply only PVC canopy for ceiling fan |
| 38 | Supply only Anti Suicide fan down rod for ceiling fan of 1' long, colour match with existing fan complete all as directed |
| 39 | S&F in replacement Fan Hook made out of MS Flat Iron of size 50x6mm of required shape at site incl nut, bolt and washer for fixing of C/fan complete all as directed |
| 40 | Rewinding of burnt out winding of stator of the ceiling fan 1200 mm sweep with existing gauge/size and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings and reassembling the same complete testing all as specified and as directed. |
| 41 | Rewinding of burnt out winding of the Exhaust fan up to 300 mm dia with existing gauge/size and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings and reassembling the same complete testing all as specified and as directed. Please Enable Macros to View BoQ information |
