|
| 1 | Demolition of brickwork built in cement mortar of any description complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises cement complete all as specified and directed. |
| 3 | Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick rendering in cement mortar (1:6) cement complete all as specified and directed. |
| 4 | Material and labour glazed ceramic coloured tiles of size 600x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) cement complete all as specified and directed. |
| 5 | M&L for Brickwork with fly ash modular size bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 6 | M&L for Rendering 15 mm thick in CM 1:4 fair faces of brick Work or concrete surface including finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for Rendering 15 mm thick in CM 1:4 on other than fair faces of brick Work including finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distember over a coat of alkali resistant priming paint & smooth surface over a coat of alkali resistant priming coat etc complete all as specified and directed. |
| 9 | M&L for nominal mix RCC (1:2:4) type B1 using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 10 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including crancking bending, spirally for hopping for columns etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 13 | Material and labour for 20mm thick Granite (of any type) tiles machine cut, in skirting, dado, riser, cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 14 | Supply and fixing 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 complete all as specified and directed. |
| 15 | S&F Grating doom 100mm dia stainless steel complete all as specified and directed. |
| 16 | Supply and fixing 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed. |
| 17 | Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 18 | S& F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame cement complete all as specified and directed. |
| 19 | Supply and fixing 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints cement complete all as specified and directed. |
| 20 | Supply and fixing of 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 21 | Supply and fixing 150mm size aluminum handles, cast type anodised cement complete all as specified and directed. |
| 22 | Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long cement complete all as specified and directed. |
| 23 | Supply and fixing GI tubes,20mm bore 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors cement complete all as specified and directed. |
| 24 | M&L for Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth cement complete all as specified and directed. |
| 25 | Supply and fixing PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed. |
| 26 | Supply and fixing 10 litre capacity PVC valveless, syphonic action type low level flushing cistern in repair with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets). Make:- Hindware, Parryware, Commander (Slim Line). |
| 27 | Supply and fixing Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) and with connection complete including making good to floor cement complete all as specified and directed. |
| 28 | Supply and fixing 3 in 1 wall mixer and provision for overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges cement complete all as specified and directed. Make : Jaquar FUS-CHR-29273UPR or equilavent as approved |
| 29 | Supply and fixing 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe cement complete all as specified and directed. |
| 30 | Supply and fixing Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 385x720x715 mm, complete all as specified and directed. Make : Jaquar (ONS-WHT-10853S300UFSM) |
| 31 | Supply and fixing Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting cement complete all as specified and directed. Make : Jaquar (ALD-573) or equivalent as approved. |
| 32 | Supply and fixing 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with 2 Way bib taps with wall flange ,screwed for iron pipe or for brass ferrule and fixed cement complete all as specified and directed. Make : Jaquar Alive 2 Way (VGP-81041) or equilavent as approved |
| 33 | Supply and fixing under counter square type wash hand basin of Size: 560x430x195 mm, Shape: Oval cement complete all as specified and directed. Make : FLS-WHT-5701 or equilavent as approved |
| 34 | Supply and fixing CP brass liquid soap dispenser with glass bottle fixed with CP brass screws cement complete all as specified and directed. Make : Jaquar (AKP-35735P) or equilavent as approved |
| 35 | Supply and fixing Brass square towel ring with and including CP brass screw cement complete all as specified and directed. Make: Jaquar (AKP-35721P) or equilavent as approved |
| 36 | Supply and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel cement complete all as specified and directed. Make: Jaquar ACN-CHR-1181FHS or equilavent as approved |
| 37 | Supply and fixing Corner Glass Shelf with Bracket cement complete all as specified and directed. Make: Jaquar (ACN-1173) or equilavent as approved Please Enable Macros to View BoQ information |
