|
| 1 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for 15 mm rendering in CM 1:4 on fair face of wall or on stone masonary surfaces finished even with water profinfing compound (WPC) and smooth without using extra cement and including necessary formwork for rendering complete all as specified and directed.Note : (WPC shall be Measured and paid seprately) |
| 3 | M&L for rendering in cement mortar (1:4) 5mm thick as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L for preparation of new plastered surfaces of wall and applying three coat of white wash on plastered surface complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 6 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 7 | M&L for stone walling, random rubble, uncoursed, well bonded, bedded and solidly hearted and built in cement mortar (1:6) complete all as specified and directed. |
| 8 | M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 10 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 450x350mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 11 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 12 | Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting point complete all as specified and directed. |
| 13 | M&L for mass concrete filling using PCC (1:5:10) type E2 using 40mm graded stone aggregrate in sunken floor complete all as specified and directed. |
| 14 | M&L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive complete all as specified and directed. |
| 15 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed. |
| 16 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50sqm not exc4.00 Sqm each and complete all as specified and directed. |
| 17 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and complete all as specified and directed. |
| 18 | Taking down shutters of any description exc 2 sqm each and complete all as specified and directed. |
| 19 | S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and directed. |
| 20 | S&F for factory Solid PVC MouldedDoor Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core as per specification & drawing in the frame at site complete all as specified and directed. |
| 21 | Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 22 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 23 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 24 | S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed. |
| 25 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 26 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 27 | M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 28 | Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete all as specified and directed. |
| 29 | Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed.Note : (Measured over all as fixed along the centre line over the fittings and accessories) |
| 30 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed. |
| 31 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 32 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 33 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 34 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 35 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 36 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 37 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 38 | S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 39 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 40 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 41 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 42 | S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. |
| 43 | S&F in repair mirror of size 600 x 450 x 5.5 mm bevelled edge of selected quality PVC / aluminium moulded frames and back with fixing arrangement to wall complete all as specified and directed. |
| 44 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 45 | S&F in repair wash hand basins vitreous china, coloured oval type/table top size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed. |
| 46 | S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 47 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 48 | S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 49 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed. |
| 50 | Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed. |
| 51 | S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed |
| 52 | S & F in repairs grating round 140mm dia stainless steel fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed. |
| 53 | Supply and Fixing in repair PVC water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed. |
| 54 | Supply and fixing in repairs for Toilet fittings Health faucet complete all as specified and directed.(Make : Jaquar) or equivalent as approved by GE. |
| 55 | S&f in repairs of 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed complete all as specified and directed. |
| 56 | Supply and fixing in repairs for Toilet fittings Two way Angle cock of 15mm bore complete all as specified and directed.Make : Prayag Cat No 9211 or equivalent as approved by GE. |
| 57 | S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed. |
| 58 | S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed. |
| 59 | Excavating in trenches any type of soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and n.exc 10 sqm on plan and n.exc 10sqm on plain area and getting out in any type of soil complete all as specified and directed. |
| 60 | Returning, fillings in including spreading, levelling, watering and well ramming in layers, n.exc 25cm thick in soil complete all as specified and directed. |
| 61 | Removing of excavated soils, not exc 100mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed. |
| 62 | Demolition/Dismantling of existing sewage pipe line and S&F Reinforced concrete 150 mm pipes, class NP2, laid and jointed complete with collars and tested as per manufactures instruction complete all as specified and directed. |
| 63 | M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate for bed including packing under & haunching against the sides of drain pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed. |
| 64 | M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 65 | M&L PCC (1:2:4) type C-1 using 20mm graded aggregate as in surface channel and drain, Coping etc complete all as specified and directed. |
| 66 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc compete all as specified and directed. |
| 67 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed of following : |
| 68 | One light point/bell point/ceiling light/exhaust fan controlled by one way 5 Amps single pole switch, |
| 69 | One 5 pin 5 Amps socket outlet on same board with other switch, |
| 70 | One 5 Pin 5 Amps socket outlet on independent board with other switch, |
| 71 | All as per item No 67.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 72 | S&F in repair of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed. |
| 73 | S&F in repair of switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed |
| 74 | S&F in repair of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed. |
| 75 | S&F in repair of socket out let 2 in 1,multipurpose 3 pin 15/16 compete all as specified and directed. |
| 76 | S&F in repair of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed. |
| 77 | S&F in repair in repair lamp holder with 9W LED Bulb Recharable type with 04 hours battery backup PVC/ polycarbonate type with back plate complete all as specified and directed. |
| 78 | Supply and fixing LED lights fitting 1x 18W Rechargable type with 04 hours battery backup, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 79 | S&F in repair in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. |
| 80 | S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 81 | M & L for submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid concealed conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 sqmm multi stranded copper conductor cable. |
| 82 | S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 83 | S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed. |
| 84 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 85 | S&F steel body heavy duty exhaust fan 250mm sweep, double ball bearing, copper wound, with louvers/shutter, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cab including Cutting openings, through bricks/stone walls in round shape, for 250mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including finishing up and matching the disturbed surface and removing surplus unserviceable bricks/stone, hard-core etc from site and rubbish complete all as specified and directed. |
| 86 | Supply and fix in repair electric water heater, storage type steel body with fiber flass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including complete water connection complete with all accessories such as safety valve, thermostate,stop valve, bib tap,flexible pipe etc complete all as specified and directed. |
| 87 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics alongwith bracket made of 32 mm GI pipe , 1.2 mtr length complete with IP 65/66 protection complete all as specified and directed. |
| 88 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
| 89 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
