|
| 1 | Demolition of Brickwork or stone/ boulder masonry but built in cement mortar in any description and position complete all as specified and directed. |
| 2 | M&L for Brickwork with subclass ‘B’ bricks of old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge |
| 3 | All as per the description of serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used). complete all as specified and directed by Engr-in-Charge |
| 4 | S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, for gate etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 450 W (Gde E-250 quality A) |
| 5 | M&L for Cement concrete 1:3:6 type C2 using 40mm aggragate in foundations, filling and mass-concrete |
| 6 | M&L applying two coats of syntheic enamel paint over a coat of red oxide on steel surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified. |
| 7 | S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged, and jagged or lewised, n exc 15cm long |
| 8 | Supply only Mild steel in flat, round or square bars, in available lengths Fe 450 W (Gde E-250 quality A) |
| 9 | S&F in repair of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm. |
| 10 | S&F in repair of steel rolling shutters gear operated type will locked gear box and crank handle, bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm. |
| 11 | S&F in repairs roller ball bearing (ISI marked) for 32/40 mm dia pipe shaft complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L for repair and re-operating the of rolling shutter of any size by oiling & greasing and required small all fittings and fixtures of shutter incl necessary welding ,channel rails,guard cover etc complete all as specified and directed. |
| 13 | M&L for Preparation of old painted surfaces of steel of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying two coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed. |
| 14 | M&L for Preparation of new painted surfaces of steel of any description over 10 Cm width or girth by applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 15 | M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed. |
| 16 | S&F Steel windows and ventilators with side hung glazed and wiremesh shutters with Z section including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded.. |
| 17 | M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair to receive tiles without using extra cement complete all as specified. |
| 18 | Granite 18 to 20mm thick with uniform texture (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over including 15mm thick screed bed in cement mortar 1:6 polishing beveled edge of corner etc, incl dismantling of stone/granite complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc. |
| 20 | S&F mild steel tubler work as in frames of gates etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 21 | M&L for MS Plates, plain or chequered, of any thickness as in gusset plate , cover plate etc in thickness in available sizes for Gde-Fe-410-W Gde-E-250 qulaity B all as directed. |
| 22 | Supply and fixing of Aluminium composite panel (ACP) of sheet coated mirror glossy finish thick 4-5mm/Natural wood finish of approved colour, pattern & design & as required shape like rectangular, trapezoidal or tappered shape & as per approved of some design with plyvinylidence fluoride (PVDF) of flat panel that consist of two thin aluminium sheets bonded to a non-aluminium core of flat sandwich panel is a structure of three layer aluminum core boned between two sheets of required size fixed with heavy duty screws on aluminium channel of 38mm x 25mm and used for external cladding or facades particition, false ceiling, signage, etc. and top layer cutting the corner and edges. Protective film ACP is removed after installation complete as as specified and as directed. Note :- 1. The scope of works includes for (i) Supply and fixing of galvanised ms standared profile sections 38 x 25mm etc for vertical and horizontal members & spacing as per menufacturer or as required at site including providing and fixing connectores, flange brackets, framing profile, end caps, etc. complete all as per manufacturers instructions. (ii) Floor grouting of the complete enclouser shall be provided at every pillar element. Fixing with anchor fastners wherever required, applying jointing acessories, cutting, finishing and assembly of aluminium profiles, cutting panels to required size, providing extra framework aroung opening, etc, complete as per site requirements, specifications & as directed by Engr-in-Charge. |
| 23 | M&L for writing stainless steel (Grade -304) letters of size 10x10x4 inches incl necessary incl fixing arrangements complete all as specified and directed. |
| 24 | M&L providing WPC jallies 24mm thick incl fixing materials and frame work & taking down old RCC jallies complete all as specified and directed. |
| 25 | Demolition of plain /reinforeced cement concrete for any thickness in any position and of any discription complete all as specified and as diredted |
| 26 | taking down old unservicable MS gate any weight complete all as specified |
| 27 | M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified Please Enable Macros to View BoQ information |
