|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Maintenance of LT cables and panels at Sapper Enclave, MES Colony and other locations under GE (Utilities) Udhampur Contract No: GE/U-20/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling of unserviceable concerete/steel tubular pole any size upto 9 mtr long including breaking up PCC and making good disturbed surface and removing materials from site of work, complete all as specified and directed by Engineer-in-Charge. |
| 3 | M & L for PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for PCC 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply and fixing of steel tubular swaged poles swan neck type with two coat of aluminium paint ovar a coat of red oxide zinc chrome prime in externally exposed to view portion and black bituminous painting to intenal surface and portion embeded in concrete incl making five alternative strips 30 cm wide in different colour above ground level or plinth level incl marking of MES pole No in black paint complete with cast iron base plate, final tapper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 mtr long) and complete all as specified and directed by Engineer-in-Charge. |
| 7 | Refixing of serviceable steel tubular pole of any type size and height obtained from item above at the location complete all as specified and directed by Engineer-in-Charge.[Note :- Earth work and concrete foundation shall be measured and paid seperately under relevant items of Sch ' |
| 8 | Supply and install 9 metre high not dip galvanised octagonal single piece pole with top not less than 70 mm A/F, bottom 175mm A/F having base plate of size not less than 275x275x16mm thick and PCD of 270 mm dia including 4 Nos 24 mm dia 750 mm long 'J' type EN8 grade foundation bolt with all suitable accessories or as per design of manufacturer or as per site. The grade of steel for reinforcement shall be FE-415 D or Fe- 500) ccomplete all as specified and directed by Engineer-in-Charge. Make: Bajaj or equivalent model of Philips, CGNote :- Excavation, PCC of 'J' bolt foundation include in this itam rate. |
| 9 | M &L for demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) |
| 10 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates for filling in road cuts/hard standing etc complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and laying 50 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and laying 40 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply, lay and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 25 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 35 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 15 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 70 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 95 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 17 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 120 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 18 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 150 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 19 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 185 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size400 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 500 Sqmm in existing LT overhead line for jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 22 | Taking down/Dismantling of old unserviceable/corroded ACSR Conductor of any size from existing over head lines completed and Supply and fix in repair PVC insulated single core stranded cable with alluminium conductor 1100 volts grade of size 630 Sqmm in existing LT overhead line for conductor, jumfering , LT Panel to transformer Boards including disconnecting and taking down at different locations. The phase conductor shall be insulated with XLPE (Sioplas) compound Aluminium as per IS-14225-1995 including all fittings such as anchor clamp, suspension clamp, line connector, service clamp, Including End joints insulator piercing connectors, for taps from bare line etc.including disconnection and reconnection of electric line complete all as specified and directed by Engineer-in-Charge. |
| 23 | Taking down/dismantling of any capacity of electrical quipments by using Hydra mechine/suitable crane complete and including necessary disconnection of undergound/OH Line from the electrical equipments by taking proper electrical shut down and placed the electrical equipment on the safer places for repairing of transformer plints/fence/surrounding area and earthing with proper caring and complete all as specified and directed by Engineer-in-Charge. Any damage to electrical equipment during disconnection and handling will be repaired by the contractor without any extra payment . |
| 24 | Shifting/Refixing back of any capacity of electrical quipments by using Hydra mechine/suitable crane complete and including necessary connection of undergound/OH Line from the electrical equipments by taking proper electrical shut down and placed the electrical equipment on the transformer plinth for after necessry repairing of transformer plints/fence/surrounding area and earthing with proper caring and complete all as specified and directed by Engineer-in-Charge.Any damage to electrical equipment during connection and handling will be borned by the contractor without any extra payment . |
| 25 | Material and lobour for providing un-interupted power supply to the users during maintenance of transformer plinth, fence and surrounding area by providing arrangement of standby transformer with LT Panel of suitable capacity alongwith LT UG Cables with complete necessary electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 26 | Disconnecting electric connection from transformer and excavation incomming and outgoing cables and shifting a site . Dismantling damaged PCC platform and make good distrubed area as per existing area including m&L for making new platform of transformer and refixing and reshifting the transformer at same location after necessary repair, including connection of incoming and outgoing cables , removing PCC platform material from site and depositing at places complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L for scraping, cleaning and preparation of old white wash and damage PCC plaster surfaces of transformer plinth complete and M&L for plastering 15 mm thick in CM 1:6 on top and around transformer plinth including two coats of colour wash over one coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 28 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc, but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material & labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material & labour for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 31 | Cutting of worn out alluminium cable terminal lugs from the transformer cable, crimping of new aluminium cables core , with suitable size of lugs and fixing with transformer, terminal stud including nd providing cables sleeve of different size of cables upto fifteen numbers as per site requirement and as directed by Engr-in-Charge. Note : Cost of cables sleeves are deemed to be included in the quoted rates. complete all as specified and directed by Engineer-in-Charge. |
| 32 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out soft/loose soil ccomplete all as specified and directed by Engineer-in-Charge for foundation of stay, laying of cable etc. |
| 33 | Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed by Engineer-in-Charge. for foundation of stay, laying of cable etc. |
| 34 | Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed. |
| 36 | S&F double walled corrugated (DWC) pipe of size 50 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in-Charge.Make: REX/Tirupati Plastomatics Pvt Ltd |
| 37 | S&F double walled corrugated (DWC) pipe of size 77 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F double walled corrugated (DWC) pipe of size 120 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground complete all as specified and directed by Engineer-in-Charge. |
| 39 | Taking up old serviceable/unserviceable UG cable from trench for replacement , repair and re-laying or re-routing of size and make good the disturbed surface to the existing :-Earth work shall be measured and paid separately under appropriate items of Sch-'A'), complete all as specified and directed by Engineer-in-Charge. |
| 40 | 6 Sqmm 2 Core to 35 Sqmm 3.5 Core |
| 41 | 50 Sqmm 3.5 Core to 150 Sqmm 3.5 Core |
| 42 | Supply, laying, testing and commissioning LT UG armoured, XLPE insulated, inner and outer sheathed, PVC insulated with multi stranded aluminium conductor cable of 1100 volts grade, ISI marked with IS-7098, laid in trenches/floor/duct/wall including aluminium lugs of suitable sizes complete all as specified and as directed of the following size :- |
| 43 | 16 sqmm 4 core |
| 44 | 25 sqmm 3.5 core |
| 45 | 35 sqmm 3.5core |
| 46 | 50 Sqmm 3.5 core |
| 47 | 95 Sqmm 3.5 Core |
| 48 | 120 Sqmm 3.5 Core |
| 49 | 150 Sqmm 3.5 Core |
| 50 | Refixing only only LT UG cable of size 16 Sqmm 02 core to upto 35 Sqmm 3.5 core. Note : The LT UG cabe will be issued by MES to contractor for execution, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Refixing only LT UG cable of size 50 Sqmm 3.5 core to upto 185 Sqmm 3.5 core. Note : The LT UG cabe will be issued by MES to contractor for execution, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 6 Sqmm nominal cross section x 3 core, complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L for cutting/Boring the existing bitumen us road/payment/footpath upto 0.75 mtr in depth, 0.45 mtr in width and getting out excavated material and making good the damaged portion after laying the pipe, returning filling in mass concrete PCC 1:2:4 type B2 upto top of the road complete all as specified and directed by Engineer-in-Charge.Note :-(i) M&L for laying of pipe shall be measured and paid separately. |
| 54 | Supply and fixing in repair LT UG cable aluminium lugs of following size including disconnection of U/S lugs from panel and making electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 55 | 120 Sqmm to 185 sqmm |
| 56 | 240 Sqmm to 400 Sqmm |
| 57 | 50 Sqmm to 95 Sqmm |
| 58 | 16 sqmm to 35 sqmm |
| 59 | Supply and fixing in repair LT UG cable aluminium ferrule of following size including disconnection of U/S ferrule l and making electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 60 | 120 Sqmm to 185 sqmm |
| 61 | 240 Sqmm to 400 Sqmm |
| 62 | 50 Sqmm to 95 Sqmm |
| 63 | 16 sqmm to 35 sqmm |
| 64 | Earthing complete with GI steel earth plate electrode 60cm x 60cmx6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI iron or steel earth wire 4mm dia (8 SWG) by means of nuts, volts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Part-I and testing after completion, complete all as specified and directed by Engineer-in-Charge. |
| 65 | Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion . (Concrete pit shall be 20 cm to 30 cm away from main pit), complete all as specified and directed by Engineer-in-Charge. |
| 66 | Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 25 x 4 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion . (Concrete pit shall be 20 cm to 30 cm away from main pit), complete all as specified and directed by Engineer-in-Charge. |
| 67 | Taking down existing old LT panel board/ LT feeder pillar box comprising of MCCB & switch fuse unit of any capacity and size including bus bar, ammeters, voltmeters etc after disconnecting all cable connection and removing from site complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F out door type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and tested at CPRI at 415 volts factory fabricated in an approved factory with CRCA sheet not less than 3.15mm thick having modern fabrication process powder coating in approved shade having thickness not less than 100 microns provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT Panel shall be front and back openable and having inner and outer shells. The inner shells duly compartmentalized for each control gears. The panel should have suitable size of Copper Bus -bar three phase 4 wire system having current carrying capacity not less than 1.2 times the rated current carrying capacity of the incomer ACB/MCCB. The panel should have the following incoming and outgoing controls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engr-in-Charge. (PCC platform of suitable size in cement concrete tybe-B1 using 20mm graded stone aggregate for mounting the feeder pillar box shall deemed to be included in the quoted rate ) and to accommodate the following incoming and outgoing controls and suitable size:- |
| 69 | Note :- 02 Nos padlock has to be fixed in the panel. The rates of the padlock is included in the quoted rates of panels. INCOMING(i) MCCB 400A, 4 pole, 36KA, Overload setting adjustable and short circuit setting fixed -01 No (ii) Digital Multi functional meter VAFPP (voltage, current,frequency, power factor- 1 No (iii) Phase indicator lamp (LED type) 1 ste (set of three) OUT GOING(i) MCCB 250A 4 pole, 36 KA Overload setting adjustable and short circuit setting fixed - 01 Nos (ii) MCCB 200 A 4 pole, 36 KA Overload setting adjustable and short circuit setting fixed - 02 Nos (iii) MCCB 63A 4 pole, 16 KA Overload setting adjustable and short circuit setting fixed - 01 Nos |
| 70 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings MCCBs are to busbar spadles to fitted complete base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following :- |
| 71 | Incoming(a) MCCB 160 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 No,Outgoing (a) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 240 Amp,4 pole, not less than 75 cm long mounted on insulators 01 setNote- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level(iii) Outgoing MCCBs shall be fed with solid busbar connectors and (iii) Cables shall be terminated using gun metal /SS glands.(vi) including suitable thimbles/lugs, nut bolts ,washers fitted the cables(v) cable glands for incoming and out going suitable cables is including rate quated by vendover |
| 72 | Supply and fixing in replacemnt of non transparent looping SMC kiosks pole box 3 phase of size 310×210×120 mm made out of engineering plastic one piece moulding siemens gray colour with hold fast including 4 Nos aluminium strips 60 amp of requird size fixed on unbrakable insulator and one no single pole MCB 1 to 3 amp 'C' curve including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15 mm CRCA MS sheet with Bus bar electrolytic grade Copper 600 Amps and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 600 Amp,4 pole spadles to fitted complete base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged with aprons for cable entry and locking arrangement with padlock lock-02 Nos complete including taking down old unserviceable feeder pilllar of any type and size complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT Junction box (KIOSK) out door type, pole mounted,compertmantalised of size 600mmx450mmx200mm suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of PVC sheet with Bus bar electrolytic grade Copper 400 Amps and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 600 Amp,4 pole spadles to fitted complete with clamp of size 50x50x6 mm with nut and bolts having front openeable hinged with aprons for cable entry including PVC cable glands and locking arrangement complete including taking down old unserviceable feeder pilllar of any type and size complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for spray painting to LT panel board complete from inner and outer side with one coat of synthetic enamel high glow paint Ist grade including preparation/cleaning of steel surfaces and welding work as required complete all as specified and directed including disconnection of supply from main complete all as specified and directed by Engineer-in-Charge (approximate 8 sq mtr of each panel board ) Make - Asian paints /Berger Paints/Neroac Paints |
| 76 | M & L for welding of Panel door inner and outer and MCCB doors from front and back with necessary hinges & locking arrangements including properly disconnection of old unserviceable parts, MS sheet and angle irom complete & locking arrangements including replacement of followings (Note MS Sheet and angle iron will be measured and paid separated. |
| 77 | Supply and fix in replacement of MS sheet duly powder coated for enclosing the feeder pillar box of any size inclding taking down old rusted MS sheet complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply and fix in replacement of MS Angle irom of size 50x50x50x6 and 40x40x6 mm sheet duly painted for bracing the sheet and also give the structure for the feeder of any size inclding taking down old rusted MS angle complete all as specified and directed by Engineer-in-Charge. |
| 79 | Supply and fixing of busbar in repair for giving common output including taking down old U/S busbars from panel of alluminium strap suitable for LT suppy 415 volts , 4 winding system including making necessary cable connection for making hole in busbar complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fixing of busbar in repair for giving common output including taking down old U/S busbars from panel of copper strap suitable for LT suppy 415 volts , 4 winding system including making necessary cable connection for making hole in busbar complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply and fix in repair busbar insulator to insulating the bar from pillar box suitable for 415 volts AC supply insulation complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and fix in replcement battery bank of capacity 24 V, consisting of (12 Nos) of 02 Volts Each 150 AH maintenance free \\"exide\\" make for system voltage 24 V, including disconnection of old U/S Battery bank complete all as specified and directed by Engineer-in-Charge. |
| 83 | M & L for replacement of Door Hinges of various capacity of LT panel and E&M equipment including taking down the old door hinges complete all as specified and directed by Engineer-in-Charge. |
| 84 | M& L For industrial salt for earthing pit recharging complete all as specified and directed by Engineer-in-Charge. |
| 85 | M & L for testing of earth resistance value of existing earthing pits once in a month with digital type earth tester at different locations of MPH area up to the entire satisfactionl & submitting the earth result all as directed. Note : Testing of all earth pits will be carried out on monthly basis and the same will be measured in presence of JE E/M and complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F in replacement of Air Circuit breaker of capacity uptu 4 pole Microprocessor released type Drawout type of capacity 800 Amps as per existing model & make complete all as specified and as directed by Engineer-in-charge. |
| 87 | S&F On load Change over switch with sheet enclosure type 200 amps 4 pole 415 Volts including taking out of unserviceable one ccomplete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F On load Change over switch with sheet enclosure type 400 amps 4 pole 415 Volts including taking out of unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F On load Change over switch with sheet enclosure type 630 amps 4 pole 415 Volts including taking out of unserviceable complete all as specified and directed by Engineer-in-Charge. |
| 90 | Dismantling of existing ACSR (any size) conductor from overhead line and setting aside (serviceable portion) for re-use in the work and removing unserviceable materials from site of work complete all as specified and directed by Engineer-in-Charge. |
| 91 | Dismantling of existing unserviceable GI earth continuity conductor and cradle guard and setting aside (serviceable portion) for re-use in the work and removing unserviceable materials from site of work complete all as specified and directed by Engineer-in-Charge. |
| 92 | Dismantling of cross-arms of MS channels or angle section etc and setting aside serviceable materials for reuse and removing unserviceable materials from site of work complete all as specified and directed by Engineer-in-Charge. |
| 93 | Dismantling of insulator of any size/type/capacity and setting aside the serviceable insulator for re-use at site and removing unserviceable insulators from site of work complete all as specified and directed by Engineer-in-Charge. |
| 94 | Dismantling of stay assembly embedded in concrete including demolition of concrete etc and removing unserviceable materials from site of workcomplete all as specified and directed by Engineer-in-Charge. |
| 95 | M & L for Stay assembly complete with all accessories as shown in electrical plate No. 1 of SSR Part-I (loop type insulator, stay clamps, stay strand, excavation and concrete shall be measured separately) using 20mm dia stay rod complete all as specified and directed by Engineer-in-Charge. |
| 96 | M & L for Loop type insulator, vitreous porcelain, white, brown or green, large size with overall dimension 90x140mm clearance of hole 25.5mm complete all as specified and directed by Engineer-in-Charge. |
| 97 | M & L for galvanised stay stand in repair of, size 7/3.15mm complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply and laying Galvanised steel wire 4.00 mm dia as continuous earth wire on over head conductor, Guard cradles on road crossing and stretching the same with required span, sag and binding the conductor with GI binding wire of approximate size all complete all as specified and directed by Engineer-in-Charge. |
| 99 | M & L for Cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 100 | M & L for Aluminium conductor steel reinforced as in overhead electric line and stretching the same with required span sag and binding the conductor with pin/shackle insulator and jumpers with aluminium binding wire not less than 2.00mm dia, PG clamp etc complete all as specified and directed by Engineer-in-Charge. |
| 101 | Tightening and straightening of any type/size/span overhead line of ACSR conductor/GI wire of any size and span by disconnecting and removing from insulators and tightening the conductor by using rope, chain pulley block etc and binding the conductor on insulators with and including binding wire and jumpers of ACSR complete all as specified and directed by Engineer-in-Charge. (Note : 03 to 04 run of ACSR conductor and one run of GI Earth wire of the lenth upto 40 to 50 RM will be measured one span and paid separately. |
| 102 | Supply and fix battery charger in replacement of capacity 24 V/110 Volt, 100 Amp single phase 3 feeder BATTERY CHARGER and D.C distribution board in common cubicle . The charger is schedule for 230V+/-10%, AC input and the output is suitable to charge of 24V DC 100Ah batteries and also supply load, The output voltage remains constant within +/-2% for AC input voltage variation 230V +/- 10% and load variation 0-100%, current ratings 100 A, over charging, overvoltage, undervoltage, over load and current limit protection complete all as specified and directed by Engineer-in-Charge. |
| 103 | Scrapping , cleaning and preparation of old surfaces of steel tubular pole of any type. size , height, swan neck type (9 mtr long) steel fitting including brackets, clamps, nuts bolts, washer etc complete and M&L for painting with two coat for aluminium paint after preparation of the steel surfaces complete all as specified and directed by Engineer-in-Charge. |
| 104 | Mateial and labour for applied strap with two coats black and white paint in strap alternatevely all round the poles from the bottom of the pole for indication of the poles. Height of the strap shall be 30 cm and number of strap shall be 05 Nos complete all as specified and directed by Engineer-in-Charge. |
| 105 | Material and labour for writing pole No with sub stn No on pole with applied two coat of black paint and writing the pole No and Sub Stn No with white luminaire paint of letter size 75 mm ccomplete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
