|
| 1 | Excavation in trenches in Hard/ dense soil n exc 1.5 m wide and n exc 1.5 m deep and getting out, required to repair the leakage of CI pipes & fittings,including demolition of PCC/road cutting and making good to match the existing surface after repair works complete all as specified and directed |
| 2 | M&L for PCC in foundation,filling and mass concrete as in motor foundation type B2 1:2:4 using 40 mm graded aggregate for tank /motor foundation complete all as specified and directed. |
| 3 | M&L for PCC in floors or mud stops rounded or chamfered edges type B0 1:2:4 using 12.5mm graded aggregate 25 mm thick complete all as specified and directed. |
| 4 | Demolition of PCC of any description and in any position all as speciified and directed |
| 5 | Demolition of brick work or stone/boulder masonary built in cement mortor or cement lime mortor including all quoins all as specified and directed |
| 6 | M & L brick work with sub class 'B' bricks in cement mortar 1:6 complete at various locations all as directed |
| 7 | M&L rendering 10 mm thick cement plaster 1:4 on brick work complete all as directed. |
| 8 | Returning, filling in including spreading levelling, watering and well ramming in layers n exc 25 cm using hard dense soil obtained from excavation complete all as specified and directed. |
| 9 | Removing surplus hard dense soil obtained from excavation/ demolition exc 250m but not n exc 500m and depositing at places allowed by BMC all as specified and directed. |
| 10 | M&L/T&P for cleaning/desilting of drinking water storage underground sump which include bailing out dead water, removing/getting out silt/ scale unwanted materials deposited at bottom, scrapping all the walls/ceiling/Floor using steel wire brush, cleaning position of all inlet/outlet piping, washing with concentrated bleaching solution & fresh water complete up to the satisfactory cleaning of underground/ semi underground sumps/tanks of different capacities located at various locations incl writting date of cleaning of sump with white paints 25 mm width letters/figures on strip duly painted with black paint for RCC semi underground sump 1.8 Lakh ltrs to 2.80 Lakh ltrs capacity at INS Dwarka Okha complete all as specified and directed by Engr – in – Charge. |
| 11 | All as per item No 10.00 above but 1.0 Lakh ltrs to 1.50 ltrs Lakh litre at INS Dwarka Okha |
| 12 | All as per item No 10.00 above but 10KL to 50 KL at INS Dwarka Okha |
| 13 | M&L/T&P for cleaning/desilting of drinking water storage overhead tank which include bailing out dead water, removing/getting out silt/ scale unwanted materials deposited at bottom, scrapping all the walls/ceiling/Floor using steel wire brush, cleaning position of all inlet/outlet piping, washing with concentrated bleaching solution & fresh water complete up to the satisfactory cleaning of overhead sumps/tanks of capacities upto 2.0 Lakh ltrs located at various locations of INS Dwarka incl white washing with one coat of lime and writting date of cleaning of sump with white paints 25 mm width letters/figures on strip duly painted with black paint for overhead sump upto 2.0 lakh capacity complete all as specified and directed by Engr – in – Charge. |
| 14 | M&L/T&P for cleaning/desilting of drinking water storage PVC Tank of capacity 10000Ltr which include bailing out dead water, removing/getting out silt/ scale unwanted materials deposited at bottom, scrapping all the walls/ceiling/Floor using steel wire brush, cleaning position of all inlet/outlet piping, washing with concentrated bleaching solution & fresh water complete up to the satisfactory cleaning of tanks of different capacities located at various locations incl writting date of cleaning of tank with white paints 25 mm width letters/figures on strip duly painted with black paint at RO Plant at INS Dwarka Okha complete all as specified and directed by Engr – in – Charge. |
| 15 | All as per item No 14.00 above but 5KL at INS Dwarka Okha |
| 16 | Disconnecting the electric connection from motor terminal box including insulating the ends of the cable, taking out the pump set from base after opening nuts/bolts, transporting from site to workshop, dismantling pump, removing worn out impeller, ball bearing, gaskets, assembling the pump with replacement of pulley key, gland packing rope, greasing, transporting back to site and fixing on the existing foundation, connecting the electric connection of motor and testing complete to entire satisfaction of Engr-in-charge for the following capacity. (Note :- Major spare parts shall be measured and paid separately, minor spares deemed to in rate quoted, spares like pump shaft, impeller and bearing only will be measured and paid separately under relevant items. |
| 17 | Centrifual pump set of capacity 20 HP (any make) |
| 18 | Centrifual pump set of capacity 15 HP (any make) |
| 19 | Centrifugal pump set of capacity upto 7.5 HP(any make) |
| 20 | Centrifugal pump set of capacity upto 3-5 HP(any make) |
| 21 | Supply only following spares :- |
| 22 | Stainless pump shaft suitable for 20 HP (Make : Match as per existing) |
| 23 | Stainless pump shaft suitable for 10/15 hp (Make : Match as per existing) |
| 24 | Stainless pump shaft suitable for 7.5 hp (Make : Match as per existing) |
| 25 | Stainless pump shaft suitable for 5 hp (Make : Match as per existing) |
| 26 | Cast iron impeller enclosed sitable for 20 HP (Make : Match as per existing) |
| 27 | Cast iron impeller enclosed sitable for 10/15 hp (Make : Match as per existing) |
| 28 | Cast iron impeller enclosed sitable for 7.5 hp (Make : Match as per existing) |
| 29 | Cast iron impeller enclosed sitable for 5 hp (Make : Match as per existing) |
| 30 | Bearing for Motor capacity 20 hp bearing No.6306 & 6308 Make : SKF/NBC/TATA |
| 31 | Bearing for Motor capacity 15/10 hp bearing No.6309 & 6308 Make : SKF/NBC/TATA |
| 32 | Bearing for Motor capacity 7.5hp bearing No.6309 & 6308 Make : SKF/NBC/TATA |
| 33 | Cast iron flange of size 65x50 mm / 80x65mm complete with nut and bolt for connecting motor and pump ( Make as per existing) |
| 34 | Stainless pump shaft suitable for 5/3 HP (Make : Match as per existing) |
| 35 | Cast iron impeller enclosed sitable for 5/3 HP (Make : Match as per existing)Note for Item No 17.00 to 20.00 : - Labour charges for fixing of supply only items are included in item No. 16 above. |
| 36 | Material and labour for rewinding the electric motor of capacity 3-5 HP capacity, disconnecting the electric connection of motors, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motors from its existing position to workshop (Note : following work are to be deemed in rate quoted). |
| 37 | Material and labour for rewinding the electric motor of capacity 20 HP capacity, disconnecting the electric connection of motors, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motors from its existing position to workshop (Note : following work are to be deemed in rate quoted). |
| 38 | All as per item No. 22.00 above but 10/15 hp |
| 39 | All as per item No. 22.00 above but 7.5 hp |
| 40 | All as per item No. 22.00 above but 3 to 5 hp |
| 41 | All as per item No. 22.00 above but upto 2 hp |
| 42 | Notes for Item No 21.00 to 26.00 : - Removing the split case/body cover of motor, separate stator/rotor and cutting the complete burnt/defective copper winding. |
| 43 | Cleaning the stator body complete by rubbing sand paper remove all carbons. |
| 44 | Insert insulating materials such as insulating paper sleeves. |
| 45 | Rewinding the stator with existing size of super enameled copper winding, varnishing and heating up at desired temp. For achieve the particular Ohm resistance. |
| 46 | Clean the rotor and assembling in motor. |
| 47 | Connection/coupling the motor with pump, connect all electric/earth connection foundation nuts/bolts at its original position and testing on load complete all as specified and directed. |
| 48 | Supply and Repair/Replacement for 63 AMP MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 25 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=100% of Icu) of capacity suitable of Existing panel board for replace of unserviseble MCCB complete all as specified and directed. Make : Havells Cat No :- IHLGHF0063 or its equivalent of BCH/Legrand/L&T |
| 49 | Supply and Repair/Replacement for 100 AMP, MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 25 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=100% of Icu) of capacity suitable of Existing panel board for replace of unserviseble MCCB complete all as specified and directed. Make : Havells Cat No :- IHLGHF0100 # or its equivalent of BCH/Legrand/L&T |
| 50 | Supply and Repair/Replacement for 160 AMP, MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 25 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=100% of Icu) of capacity suitable of Existing panel board for replace of unserviseble MCCB complete all as specified and directed. Make : Havells Cat No :- IHLGHF0125# or its equivalent of BCH/Legrand/L&T |
| 51 | Material and albour for scrubing old paints from outer surface of plants and equipment including painting with two coat of synthetic enameled paint over coat of red oxide paint and also writing SM/MES Nos or surface of the plant with white paint all as approved by Engr-in-charge for following :- |
| 52 | Pump and motor set from 5/3 hp inclduing sunction and delivery upto 5 Mtrs |
| 53 | LT Panel board for pump and motor of any description |
| 54 | Dismantling and taking down old u/s starter of any make and Supply and fix starter suitable for upto 5 hp motor type MK-1 complete with sheet-steel enclosure complete all as specified and directed. |
| 55 | Dismantling and taking down old u/s starter of any make and Supply and fix starter suitable for upto 7.5 hp motor type MK-1 complete with sheet-steel enclosure complete all as specified and directed. |
| 56 | Dismantling and taking down old u/s starter of any make and Supply and fix starter suitable for 10/15 hp motor type MK-1 complete with sheet-steel enclosure complete all as specified and directed. |
| 57 | Supply and Repair/replacement of 10 Sqmm 3 core electric supply cable PVC insulated copper cable, PVC round sheathed Submersible cable multicore industrial Cables for voltage grade upto 1100 V complete with copper lugs all as specified and directed by Engr-in-charge. |
| 58 | Supply and Repair/replacement of 6 Sqmm 3 core electric supply cable PVC insulated copper cable, PVC round sheathed Submersible cable multicore industrial Cables for voltage grade upto 1100 V complete with copper lugs all as specified and directed by Engr-in-charge. |
| 59 | M&L in Replacement of Earthing complete with galvanised steel earth plate electrode 60 x 60 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvansied iron strip 25 x 4 mm as earth lead by means of bolts, nuts, check nuts and washer os galvanised iron or steel all as shown in electrical platge No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 60 | M&L in Replacement of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed. |
| 61 | Supply and replace UNSV pressure gauge 100 mm dia range 0-10 kg/Sqcm complete all as specified and directed. |
| 62 | Supply and fix in repair timer with over relay suitable for 5 to 20 HP motor, Make : Bhartiya cutler Hammer/L & T (as per existing range) |
| 63 | Supply and fix in repair single phase preventer suitable for 20/10/7.5 HP motor( Make : as per existing range) |
| 64 | S& F in repair Air cock brass suitable for pumps 5 to 20 hp reqd for priming of pumps as per site reqmt |
| 65 | S&F in repair Volt meter range 0- 500V of suitable size complete all as specified and directed. |
| 66 | S&F in repair Ammeter range 0- 600 Amp complete all as specified and directed. |
| 67 | S&F in repair eyebolt suitable for 20/10/5 Hp motor complete all as specified and directed. |
| 68 | M&L for PCC in floors or mud stops ronded or chamfered edges type B0 1:2:4 using 12.5mm graded aggregate complete all as specified and directed. |
| 69 | M&L repairs motor foundation by removing old broken brick work & remaking with sub class 'B' bricks in cement mortar 1:6 complete for at various locations complete all as specified and directed. |
| 70 | M&L rendering 10 mm thick cement plaster 1:4 on brick work at various locations all as directed. |
| 71 | M&L for Fabricate, supply & install in MS angle/channel framed structure for support base reqd for fixing of motors using MC channel and angles of any size & shape as required & ordered including all type of fabrication work including cutting ways, drilling, welding necessay for accomodating suitable size bolts & nuts,painting with two coats of synthetic enamel over a coat of red oxidde all as directed including dismantling/ taking old rusted broken items complete for taking credit all as specified and directed by Engr in Charge. |
| 72 | S & F in repair Dosing pump suitable for chemical dosing in raw water/treated water with Max injection pressure 4 Bar (4 Kg/Sq cm) Capacity - 06 LPH as per requirement at site complete all as specified and directed. |
| 73 | M&L for Fabricate, supply & fix in replacement MS sheet plain 4 mm thick of required size & shape including necessary fabrication as required & ordered for valve chamber cover/covers in sump opening including fixing with frames by means of hinges & painting with two coats of synthetic enamel paint over primer of red oxide complete. |
| 74 | M&L in replacement GI tubing medium grade galvanised with all fittings, Bends etc fix to wall and ceiling/lead on floor of UG sump, complete incl dismantling old pipes of any length for 100 mm dia bore sizes |
| 75 | All as per item no 51.00 above but 80 mm bore |
| 76 | All as per item no 51.00 above but 50 mm bore |
| 77 | All as per item no 51.00 above but 40 mm bore |
| 78 | Supply and Repair/Replacement of Laying in trenches or passing through pipe,50 Sqmm 3.5 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and as directed. |
| 79 | Supply and Repair/Replacement of Laying in trenches or passing through pipe,95 Sqmm 3.5 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and as directed. |
| 80 | Supply and Repair/Replacement of Laying in trenches or passing through pipe,25 Sqmm 4 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and as directed. |
| 81 | Supply and lay Double Walled Corrugated (DWC) Pipes of dia 50mm having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 50 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge. |
| 82 | S&F in replacement of ACP retro sign board of size 2.2 x 1.2 Mtr using retro reflective high intensity prismatic reflective sheeting. The back ground of board is Blue Colour with white border and writing letter, numbers white colour mentioning the Pump House/ Ro Plant Detais, Retro sign board shall be pasted on 3 mm thick ACP sheet. The board shall be fixed on steel tubular poles including fixing of clamps, nuts, bolts, washer etc complete all as directed by Engineer-in-Charge. |
| 83 | Supply and fixing inreplacement of rotational moulded plyethylene water storage tanks (cylindercal vertical with closed top) hoisted and fixed in position of 10000 Ltr capacity PVC ISI marked double layered complete with inlet outlet wash out and overflow nipples and connections incl top lid complete. (Make : Sintex/Polycon & Generic product ID-4957.) |
| 84 | Supply and fixing inreplacement of rotational moulded plyethylene water storage tanks (cylindercal vertical with closed top) hoisted and fixed in position of 5000 Ltr capacity PVC ISI marked double layered complete with inlet outlet wash out and overflow nipples and connections incl top lid complete. (Make : Sintex/Polycon & Generic product ID-4957.) |
| 85 | Supply and Laying of replacement of Ductile iron pipes of dia 150 mm with K-9 spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and directed. |
| 86 | Supply and Laying of replacement of Ductile iron pipes of dia 100 mm K-7 with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and directed. |
| 87 | Sypply and Repair/Replacement laying of 3 layer PP-R pipes of dia 160mm SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for Hot & Cold water supply all PP-R plain and brass threded polypropylene random fittings including fittings such as bends, tees, elbows, short pieces, connectors, back nuts and connections fixed in new or old position in trenches, walls, floors etc complete all as specified and directed. |
| 88 | All as per above item No. 64.00 but dia 63 mm |
| 89 | All as per above item No. 64.00 but dia 50 mm |
| 90 | All as per above item No. 64.00 but dia 32 mm |
| 91 | All as per above item No. 64.00 but dia 25 mm |
| 92 | Taking down Old unserviceable GI/CI pipe at in any position for repairs and taking credit all as directed for 25 mm bore size pipes/fitings etc :- |
| 93 | All as per item No 69.00 above but 32mm bore |
| 94 | All as per item No 69.00 above but 40 mm bore |
| 95 | All as per item No 69.00 above but 50 mm bore |
| 96 | All as per item No 69.00 above but 80 mm bore |
| 97 | Supplying and laying repair/replacement of CPVC pipe SDR 11 & Plain CPVC SDR 11 of 25mm outer dia of of pipe including fittings such as bends, tees, elbows, short pieces, connectors, back nuts and connections fixed in new or old position in trenches, walls, floors etc complete all as specified and directed. |
| 98 | All as per item No 74.00 above but 32 mm bore |
| 99 | All as per item No 74.00 above but 40 mm bore |
| 100 | All as per item No 74.00 abovebut 50 mm bore |
| 101 | Supplying and laying repair/replacement of CPVC pipe Schedule 80 pipes & plain CPVC Schedule 80 fittings of 75mm inner dia (80m outer dia) of of pipe including fittings such as bends, tees, elbows, short pieces, connectors, back nuts and connections fixed in new or old position in trenches, walls, floors etc complete all as specified and directed. |
| 102 | Supply and Repair/Replacement of CPVC ball valve 25 mm bore fixed all as specified and directed. |
| 103 | All as per item No 79.00 above but 32mm bore complete all as specified and directed. |
| 104 | All as per item No 79.00 above but 40 mm bore complete all as specified and directed. |
| 105 | S & F PPR Gate valve (brass insert) for PP-R pipe of following sizes: - |
| 106 | 32 mm OD |
| 107 | 25 mm OD |
| 108 | M&L for Cutting of hard standing/ Road for laying of pipe line and making good surfaces by using PCC 1:2:4 type B-2 after laying of pipe line/ cable up to 30cm in depth and width not exceeding 45cms and removing rubbish outside MD land complete all as specified and as directed. Please Enable Macros to View BoQ information |
