|
| 1 | Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / ceiling fan/bulk head light / mirror lights etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M/ Engr-In-Charge.(v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned AGE/JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned AGE/JE E/M . |
| 2 | S&F in repairs lamp holder, PVC/polycarbonate type with back plate complete as specified and directed by Engr-in-Charge. |
| 3 | Supply and fix in replacement of modular five step type fan regulator 120W, 2 module, suitable for BLDC fans complete as specified and directed by Engr-in-Charge. |
| 4 | Supply and fix in replacement of modular switch type 10 amps one way one module complete as specified and directed by Engr-in-Charge. |
| 5 | Supply and fix in replacement of modular switch piano type 16 amps one way one module all asspecified and directed. |
| 6 | Supply and fix in replacement of modular Socket, 6A - 2/3 pin 2 module complete as specified and directed by Engr-in-Charge. |
| 7 | Supply and fix in replacement of modular Socket, 6/16A - 2/3 pin 2 module complete as specified and directed by Engr-in-Charge. |
| 8 | S&F in replacement modular Bell push 6A 1 module complete as specified and directed by Engr-in-Charge. |
| 9 | S&F in replacement modular switch type 10 amps Two way one module complete as specified and directed by Engr-in-Charge. |
| 10 | S & F in replacement of switch piano flush type 5 Amps SP one way complete as specified and directed by Engr-in-Charge. |
| 11 | S & F in replacement of switch piano type 15 Amps SP one way complete as specified and directed by Engr-in-Charge. |
| 12 | S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete as specified and directed by Engr-in-Charge. |
| 13 | S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete as specified and directed by Engr-in-Charge. |
| 14 | S&F in replacement of socket outlet 5/6 Amps 2in 1, flushtype, 3 pin complete as specified and directed by Engr-in-Charge. |
| 15 | S&F in replacement of socket outlet 5/15 Amps, 2 in 1, flush mounted 3/5 pin multi purpose all as specified. |
| 16 | S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete as specified and directed by Engr-in-Charge. |
| 17 | M&L in replacment of fan regulator electronic five step flush type , 2module suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge. |
| 18 | M&L in replacement of door bell AC 230 volts single phase ding dong type complete as specified and directed by Engr-in-Charge. |
| 19 | M&L in replacement bell push, flush type 5 Amps complete as specified and directed by Engr-in-Charge. |
| 20 | S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete as specified and directed by Engr-in-Charge. |
| 21 | S & F in replacement of switch socket combination with box 6/16 Amps with box 4 fixing holes flush mounted 3/5 pin multi purpose complete as specified and directed by Engr-in-Charge. |
| 22 | Taking down carefully existing point wiring any type (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete as specified and directed by Engr-in-Charge. |
| 23 | M&L point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator for One light/Fan point controlled by one way switch 6 Amps 240 volts etc complete as specified and directed by Engr-in-Charge. |
| 24 | Ditto all as per item no. 23 above but One 3 pin 6 Amps socket out let point on independent board. |
| 25 | Ditto all as per item no. 23 above but One 3 pin 6 Amps socket out let point on same board. |
| 26 | Ditto all as per item no. 23 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size. |
| 27 | M&L point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete as specified and directed by Engr-in-Charge. |
| 28 | All as per item No 27.00 above but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board and size of earthing cable 4 Sqmm |
| 29 | M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete as specified and directed by Engr-in-Charge. |
| 30 | S&F in repair flexible conduit pipe ivory grey in colour of dia 25 mm Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed by Engr-in-Charge.(Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 32 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed by Engr-in-Charge. (Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 33 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed by Engr-in-Charge.(Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 34 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed by Engr-in-Charge.(Two runs of 04 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 35 | Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as specified and directed Engr-in-Charge. |
| 36 | S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door DB with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced. |
| 38 | Dittto all as per item no 37 above but 08 way SPN DB (Double door) |
| 39 | Dittto all as per item no 37 above but 04 way SPN DB (Single door) |
| 40 | Dittto all as per item no 37 above but 04 way SPN DB (Double door) |
| 41 | Dittto all as per item no 37 above but 02 way SPN DB (Single door) |
| 42 | Supply & fixing in repair of sheet metal enclosure VTPN MCCB DB double door, 6 way upto suitable for MCCB 125 amp, insulated copper busbar assembly, IP43 type complete all as specified and directed by engineer in charge. |
| 43 | S&F in replacement MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals all as specified and directed Engr-in-Charge. |
| 44 | S&F MCCB in replacement with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals all as specified and directed Engr-in-Charge. |
| 45 | S&F in replacement of B Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed. |
| 46 | S&F in replacement of C Curve MCB SPN 32 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed. |
| 47 | Supply and fix in replacement of C Curve MCB TPN 40-100 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed. |
| 48 | S&F in replacement 1x20 watt, 4 feet,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified . |
| 49 | Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed.Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only. Note No (iii) to (vi) below Item No 1 of this schedule are equally applicable to this item too. |
| 50 | Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. |
| 51 | Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan. |
| 52 | S&F in replacment aluminum fan blades suitable for heavy duty exhaust fan of any sweep as per the sample given by the Engr-in-charge |
| 53 | M&L for removing the burnt winding of ceiling fan motor of size 1200/1400 mm sweep, rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position all as directed by Engineer-in-charge. |
| 54 | Ditto all as per item no. 53 above but Exhaust fan of 300 mm sweep. |
| 55 | Ditto all as per item no. 53 above but wall mounted fan of 400 mm sweep. |
| 56 | M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades all as specified and directed by Engr-in-charge. |
| 57 | Ditto all as per item no. 56 above but exhaust fan of size 12\\" (300 mm) sweep |
| 58 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150 mm inclduing replacing the plywood as per the site requirement all as specified and directed by Engr-in-charge.(Note: Old Exhuast fan should be deposited in MES store yard) |
| 59 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200 mm inclduing replacing the plywood as per the site requirement all as specified and directed by Engr-in-charge. (Note: Old Exhuast fan should be deposited in MES store yard) |
| 60 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm inclduing replacing the plywood as per the site requirement all as specified and directed by Engr-in-charge. (Note: Old Exhuast fan should be deposited in MES store yard) |
| 61 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm inclduing replacing the plywood as per the site requirement all as specified and directed by Engr-in-charge. (Note: Old Exhuast fan should be deposited in MES store yard) |
| 62 | S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc all as directed by Engr-in-charge. |
| 63 | S&F in replacement metal clad plug top 3 pin,20Amps, 230 volts, ISI marked heavy duty for geyser connection cord all as specified and directed by Engr-in-charge. |
| 64 | S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord. |
| 65 | S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed. |
| 66 | S&F in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser all as specified and directed. |
| 67 | S&F in replacement PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed by Engr-in-charge. |
| 68 | S&F in replacement PVC insulated cable 3 core stranded copper conductor 4 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed by Engr-in-charge. |
| 69 | M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick buried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to galvanised earth lead wire 4.0mm dia for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed.(Note : GI earth strip and GI protection pipe upto 7.5 mtr length shall be included in this item.) |
| 70 | S&F in replacement of 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as directed. |
| 71 | S&F in replacement of GI pipe bracket of 40 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed. |
| 72 | Supply and fixing in repair LED building security light fitting 35 Watt 230, 120 lms/Watt V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics and should have be certified LM 79 & LM 80 test complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in replacement of 1x10 watt,2 feet,230V , / Min 100 lms/w surface and wall mounted LED batten suitable for mirror light with Aluminium housing, glare free,and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed by Engr-In- Charge, |
| 74 | S&F in replacement of LED tubelight batten 20 W, 4 feet length,5700 k ,120 lms/watt, Aluminium extrusion housing, glare free, PH>0.95, THD<10% and should have certified LM 79 & LM 80 test complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply and fixing in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light, Min 120 lms/w complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete all as speciifed and directed by Engr-in-charge. |
| 76 | Supply & fix in replacement of LED fixture 18 watt surface mounted ceiling light 5700K with diffuser to give glare free light of size 300x300 mm, Min 120 lms/w powder coated CRCA housing with compatible driver complete all as specified & directed by Engr-in-Charge. |
| 77 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm with deep drawn CRCA housing , 5700K, 35/36 watt, CW/WW type , 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light, Min 120 lms/w complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in replacement Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including 01x9 W LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fix in replacement LED tube rod 18/20 Watt, 6500 K, 1200 mm long complete all as specified and directed by Engr-in-Charge. |
| 80 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, 5700K recessed type with high efficiency PMMA diffuser soft glare free light,bottom opening recess mounting CRCA housing luminare for cleenroom spaces, equiped with IP 65 protection Min 100 lms/w complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. |
| 81 | M&L for taking down carefully ceiling fans with fans with fan down rod of any length by disconnecting electrcical connection and fixing the same with new anti suicide fan down rod 12 inch (off white colour), hanging fan and making necessary electrical connection , testing fan for its smooth functioning. Anti suicide fan rod shall manufactured with inbuilt spring so as to brake and hang on spring when load on fan exceeds 20 kg. Fan rods shall be tested and aprroved by Gov of India MSME labotary all as specified and directed by Engr-in-Charge. |
| 82 | M&L for taking down carefully ceiling fans with fans with fan down rod of any length by disconnecting electrcical connection and fixing the same with new anti suicide fan down rod 18 inch (off white colour), hanging fan and making necessary electrical connection , testing fan for its smooth functioning. Anti suicide fan rod shall manufactured with inbuilt spring so as to brake and hang on spring when load on fan exceeds 20 kg. Fan rods shall be tested and aprroved by Gov of India MSME labotary all as specified and directed by Engr-in-Charge. |
| 83 | S& F in replacement PVC unbreakable surface boxes of size 4x4 all as specified and directed by Engr-in-charge. |
| 84 | S& F in replacement PVC unbreakable surface boxes of size 6x6 all as specified and directed by Engr-in-charge. |
| 85 | S& F in replacement PVC unbreakable surface boxes of size 4x7 all as specified and directed by Engr-in-charge. |
| 86 | S& F in replacement PVC unbreakable surface boxes of size 6x8 all as specified and directed by Engr-in-charge. |
| 87 | S& F in replacement PVC unbreakable surface boxes of size 8x10 all as specified and directed by Engr-in-charge. |
| 88 | S&F in replacement of Modular white cover with frame 2 module complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F in replacement of Modular white cover with frame 3 module complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F in replacement of Modular white cover with frame 4 module complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F in replacement of Modular white cover with frame 6 module complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F in replacement of Modular white cover with frame 8 module complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F in replacement for Modular white cover plate with frame 12 module all as specified and directed by Engr-in-charge. |
| 94 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module all as specified and directed by Engr-in-charge. |
| 95 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module all as specified and directed by Engr-in-charge. |
| 96 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module all as specified and directed by Engr-in-charge. |
| 97 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module all as specified and directed by Engr-in-charge. |
| 98 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module all as specified and directed by Engr-in-charge. |
| 99 | S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module all as specified and directed by Engr-in-charge. |
| 100 | Taking down carefully and refixing geyser of any size/make with necessary fastners/clamps and making good any disturbed surface all as specified and directed by Engr-in-charge. |
| 101 | Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, power consumption should be 28-32 watt, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 102 | S&F in repair exhaust fan AC single phase 230 V of size 300 mm, 1400 RPM (steel body) with louvers shutter grey colour and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed. Make- Orient/Bajaj/Usha/CG/Havells or equivalent. Note : Old unserviceable exhaust fan will be deposited in MES store by the contractor. |
| 103 | S&F in repair exhaust fan AC single phase 230 V of size 225 mm, 1400 RPM (steel body) with louvers shutter grey colour and connected with flexible cord of size 23/0/0076 stranded copper conductor PVC insulated of length not less than 0.7m complete all as specified and directed. Make- Orient/Bajaj/Usha/CG/Havells or equivalent. Note : Old unserviceable exhaust fan will be deposited in MES store by the contractor. |
| 104 | M&L for userviceable geyser of 25 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complte all as specified and directed by Engr-in-Charge. |
| 105 | S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed by Engr-in-Charge. |
| 106 | S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge |
| 107 | S&F in replacement Brass chromium plated connection 15 mm dia 600 mm long (heavy duty) with 2 Nos brass chrominum plated nuts and washer suitable for geysers of 25 ltr capacity complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
