Tender For Tender For For The Year 2026 2027 Under The Water Supply Department Of Satara City To Remove The Leakages Of The Distribution Pipe Of 15 Mm To 18 Inch Diameter To Regulate The Water Distribution System And To Do Other Ancillary Works, Satara-Maharashtra

TDR : 55212579

Tender Notice
BOQ

5 Days Left

Satara , Maharashtra

Tender Brief : Tender for Tender for For The Year 2026 2027 Under The Water Supply Department Of Satara City To Remove The Leakages Of The Distribution Pipe Of 15 Mm To 18 Inch Diameter To Regulate The Water Distribution System And To Do Other Ancillary Works

Document Fees
₹ 14160 /-

EMD
₹ 60000.0 /-

Tender Value
Refer document

Submission Date
30-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	MATERIAL
2	Acetylene Gas
3	Alum Grade I First
4	Alum Grade IV Ex-factory
5	Binding Wire
6	Black enemal paint Anti corrosive
7	Bricks
8	Cement (Bags)
9	Corrosion Resistant steel
10	Diesel
11	Epoxy paint
12	Lubricant Oil
13	M.S.angle(50x50x6mm)
14	M.S.Bars (Delivery at site)
15	M.S.plate
16	Mildsteel grill railing
17	Nails
18	Nutbolts
19	Rapid sand Gravity filter sand At Source (Godhara, Gokak, Kanhan, Yesagi sand)
20	Rapid sand Gravity filter Gravel At Source
21	Ready mixed lead/zinc paint
22	Ready mix oil paint
23	Ready mix primer
24	Ready mix primer for steel
25	Stone Aggregate 20 mm
26	Structural Steel
27	T.C.L.(bleaching poweder Gr.I) (25kg pack)
28	GI SHEET
29	Cold Mix Asphalt Bag 25Kg / Patch Repair / Pothholes Patches / Asphalt Cold Mix Bitumen 25Kg
30	LABOUR AND MACHINERY
31	Asst Fitter
32	Breaker
33	Carpainter 1st class
34	Fitter 1st class
35	Helper
36	Mason 1st class
37	MAZDOOR
38	Maistry
39	Mukadam
40	Painter (for coloring)
41	Pump Driver
42	Welder for pipe line
43	L.M.V. Driver
44	Electrician
45	Plumber (Building/Pipeline)
46	Filter Operator
47	Surveyor
48	Technician (Lab)
49	Laboratory Assistant
50	Chemist
51	HIRE CHARGES OF MACHINERIES
52	Rent for welding set with Generator
53	Rent for Concrete breaker & Compressor
54	Rent for poclain
55	Rent for JCB
56	Pipe cutter with operator
57	Excavation for foundation / pipe trenches in earth, soils of all types , sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift 0 to 1.5 M
58	Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) Lift 0 to 1.5 M
59	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc.complete. (Bd-A-3/259) Lift 0 to 1.5 M
60	Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift 0 to 1.5 M
61	Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.
62	Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel),etc. complete. (Bd-A-9/261)
63	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
64	Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)
65	a) In PCC M-100
66	b) In PCC M-150
67	Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
68	a) In RCC M-150
69	b) In RCC M-200
70	c) In RCC M-250
71	d) In RCC M-300
72	Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase
73	a) In RCC M-150
74	b) In RCC M-200
75	c) In RCC M-250
76	d) In RCC M-300
77	Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306)
78	a) Mild Steel
79	b) Tor Steel
80	Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete.(Excluding reinforcement and structural steel)
81	For Foundation
82	a) In RCC M-150
83	b) In RCC M-200
84	c) In RCC M-250
85	d) In RCC M-300
86	For all types of Columns
87	a) In RCC M-150
88	b) In RCC M-200
89	c) In RCC M-250
90	d) In RCC M-300
91	For Beams / Braces / Lintels
92	a) In RCC M-150
93	b) In RCC M-200
94	c) In RCC M-250
95	d) In RCC M-300
96	Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase
97	a) In RCC M-150
98	b) In RCC M-200
99	c) In RCC M-250
100	d) In RCC M-300
101	Chajjas / Parapets / Curtain Walls / Partition Walls / Pardies
102	a) In RCC M-150
103	b) In RCC M-200
104	c) In RCC M-250
105	d) In RCC M-300
106	Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/ Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends, couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer in charge.
107	A) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipe For MDPE/UPVC Pipe ServiceConnection on Disribution main
108	(With Road Crossing)
109	For 15 mm Service connection
110	For 20 mm Service connection
111	For 25 mm Service connection
112	(Without Road Crossing)
113	For 15 mm Service connection
114	For 20 mm Service connection
115	For 25 mm Service connection
116	B)Household Connection without water meter (With Integrated Saddle & compression Specials) For HDPE/PVC pipe
117	(With Road Crossing)
118	For 15 mm Service connection
119	For 20 mm Service connection
120	For 25 mm Service connection
121	(Without Road Crossing)
122	For 15 mm Service connection
123	For 20 mm Service connection
124	For 25 mm Service connection
125	Providing and supplying ISI mark C.I. S&S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets.
126	(Suitable for Tyton / Pig lead joints)
127	a) Class ‘LA'
128	80 mm
129	100 mm
130	150 mm
131	200 mm
132	250 mm
133	300 mm
134	C.I. PIPES ‘A' Class Continued
135	Class ‘A'
136	80 mm
137	100 mm
138	125 mm
139	150 mm
140	200 mm
141	250 mm
142	300 mm
143	350 mm
144	400 mm
145	450 mm
146	Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.
147	Note : Only SBR Rubber gaskets to be used as per
148	C.I. ‘L.A.' Class / Mortar inlined DI K-9/K-7
149	80 mm.
150	100 mm.
151	125 mm.
152	150 mm.
153	200 mm.
154	250 mm.
155	300 mm.
156	350 mm.
157	400 mm.
158	450 mm.
159	C.I. ‘A' Class
160	80 mm.
161	100 mm.
162	125 mm.
163	150 mm.
164	200 mm.
165	250 mm.
166	300 mm.
167	350 mm.
168	400 mm.
169	450 mm.
170	Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets.
171	(IS:8329-2000 Latest Version) D.I. K-9
172	100mm
173	150mm
174	200mm
175	250mm
176	300mm
177	350 mm
178	400 mm
179	450 mm
180	500 mm
181	600 mm
182	Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.
183	80 mm.
184	100 mm.
185	125 mm.
186	150 mm.
187	200 mm.
188	250 mm.
189	300 mm.
190	350 mm.
191	400 mm.
192	450 mm.
193	500 mm.
194	600 mm.
195	Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer - in- charge. (for 2.75 m bare pipe)
196	i) 100 mm
197	ii) 150 mm
198	iii) 200 mm
199	iv) 250 mm
200	v) 300 mm
201	vi) 350 mm
202	vii) 400 mm
203	viii) 450 mm
204	ix) 500 mm
205	x) 600 mm
206	Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
207	80 mm.
208	100 mm.
209	125 mm.
210	150 mm.
211	200 mm.
212	250 mm.
213	300 mm.
214	350 mm.
215	400 mm.
216	450 mm.
217	500 mm.
218	600 mm.
219	P. V. C. PIPES Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).
220	Working Pressure 8 Kg/Sq.cm
221	63 mm.
222	75 mm.
223	90 mm.
224	110 mm.
225	140 mm.
226	160 mm.
227	180 mm.
228	200 mm.
229	225 mm.
230	250 mm.
231	280 mm.
232	315 mm.
233	Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).
234	b) Working Pressure 6 to 12.5 Kg./Sq.cm.
235	63 mm.
236	75 mm.
237	90 mm.
238	110 mm.
239	125 mm.
240	140 mm.
241	160 mm.
242	180 mm.
243	200 mm
244	225 mm
245	250 mm
246	280 mm
247	315 mm
248	Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.
249	MEDIUM
250	15 mm. ( 1.23 kg./m )
251	20 mm. ( 1.59 kg./m )
252	25 mm. ( 2.40 kg./m )
253	32 mm. ( 3.17 kg./m )
254	40 mm. ( 3.65 kg./m )
255	50 mm. ( 5.16 kg./m )
256	65 mm. ( 6.63 kg./m )
257	80 mm. ( 8.64 kg./m )
258	100 mm. ( 12.40 kg./m )
259	125 mm ( 16.70 kg/m )
260	150 mm.( 19.70 kg./m )
261	Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.
262	15 mm. ( 1.23 kg./m )
263	20 mm. ( 1.59 kg./m )
264	25 mm. ( 2.40 kg./m )
265	32 mm. ( 3.17 kg./m )
266	40 mm. ( 3.65 kg./m )
267	50 mm. ( 5.16 kg./m )
268	65 mm. ( 6.63 kg./m )
269	80 mm. ( 8.64 kg./m )
270	100 mm. ( 12.40 kg./m )
271	125 mm ( 16.70 kg/m )
272	150 mm.( 19.70 kg./m )
273	D.I. FITTINGS (Mechanical Joints) Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.
274	MJ Collar/Coupling
275	80 mm dia
276	100 mm dia
277	150 mm dia
278	200 mm dia
279	250 mm dia
280	300 mm dia
281	350 mm dia
282	400 mm dia
283	450 mm dia
284	Double Socket Bend 90 degree
285	80 mm dia
286	100 mm dia
287	150 mm dia
288	200 mm dia
289	250 mm dia
290	300 mm dia
291	350 mm dia
292	400 mm dia
293	Double Socket Bend 45 degree
294	80 mm dia
295	100 mm dia
296	150 mm dia
297	200 mm dia
298	250 mm dia
299	300 mm dia
300	350 mm dia
301	400 mm dia
302	H. D. P. E. PIPES Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151/ 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.
303	Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form
304	PE-100, 8 Kg/Sq. cm :
305	63 mm
306	75 mm
307	90 mm
308	110 mm
309	125 mm
310	140 mm
311	160 mm
312	180 mm
313	200 mm
314	225 mm
315	250 mm
316	280 mm
317	315 mm
318	355 mm
319	400 mm
320	450 mm
321	Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 PartII
322	For all classes.
323	20 mm
324	25 mm
325	32 mm
326	40 mm
327	50 mm
328	63 mm
329	75 mm
330	90 mm
331	110 mm
332	125 mm
333	140 mm
334	160 mm
335	180 mm
336	200 mm
337	Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessaryand reinstating to original position..
338	20 mm dia
339	25 mm dia
340	32 mm dia
341	40 mm dia
342	50 mm dia
343	63 mm dia
344	75 mm dia
345	90 mm dia
346	110 mm dia
347	125 mm dia
348	140 mm dia
349	160 mm dia
350	180 mm dia
351	200 mm dia
352	M. D. P. E. PIPES Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC/ CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed.
353	PN 16 (SDR 11)
354	20 mm
355	25 mm
356	32 mm
357	40 mm
358	Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.
359	Couplers
360	Couplers 20
361	Couplers 25
362	Couplers 32
363	Couplers 40
364	Couplers 50
365	Couplers 63
366	Couplers 75
367	Couplers 90
368	Couplers 110
369	Couplers 125
370	Couplers 140
371	Couplers 160
372	Couplers 180
373	Couplers 200
374	Equal Tee
375	Equal Tee 20
376	Equal Tee 25
377	Equal Tee 32
378	Equal Tee 40
379	Equal Tee 50
380	Equal Tee 63
381	Equal Tee 75
382	Equal Tee 90
383	Equal Tee 110
384	Equal Tee 125
385	Equal Tee 140
386	Equal Tee 160
387	Equal Tee 180
388	Equal Tee 200
389	Elbow 90 Deg.
390	Elbow 90 Deg. 20
391	Elbow 90 Deg. 25
392	Elbow 90 Deg. 32
393	Elbow 90 Deg. 40
394	Elbow 90 Deg. 50
395	Elbow 90 Deg. 63
396	Elbow 90 Deg. 75
397	Elbow 90 Deg. 90
398	Elbow 90 Deg. 110
399	Elbow 90 Deg. 125
400	Elbow 90 Deg. 140
401	Elbow 90 Deg. 160
402	Elbow 90 Deg. 180
403	Elbow 45 Deg.
404	Elbow 45 Deg. 32
405	Elbow 45 Deg. 40
406	Elbow 45 Deg. 50
407	Elbow 45 Deg. 63
408	Elbow 45 Deg. 75
409	Elbow 45 Deg. 90
410	Elbow 45 Deg. 110
411	Elbow 45 Deg. 125
412	Elbow 45 Deg. 140
413	Elbow 45 Deg. 160
414	Elbow 45 Deg. 180
415	Elbow 45 Deg. 200
416	Reducer
417	Reducer 25X20
418	Reducer 32X20
419	Reducer 32X25
420	Reducer 40X32
421	Reducer 50X32
422	Reducer 50X40
423	Reducer 63X32
424	Reducer 63X40
425	Reducer 63X50
426	Reducer 75 x 63
427	Reducer 90X63
428	Reducer 90X75
429	Reducer 110X50
430	Reducer 110X63
431	Reducer 110X75
432	Reducer 110X90
433	Reducer 125X90
434	Reducer 125X110
435	Reducer 140X75
436	Reducer 140X90
437	Reducer 140X110
438	Reducer 140X125
439	Reducer 160X90
440	Reducer 160X110
441	Reducer 160X125
442	Reducer 160X140
443	Reducer 180X110
444	Reducer 180X125
445	Reducer 180X140
446	Reducer 180x160
447	Reducer 200X63
448	Reducer 200X90
449	Reducer 200X110
450	Reducer 200X140
451	Reducer 200X160
452	Reducer 200x180
453	End Cap
454	End Cap 20
455	End Cap 25
456	End Cap 32
457	End Cap 40
458	End Cap 50
459	End Cap 63
460	End Cap 75
461	End Cap 90
462	End Cap 110
463	End Cap 125
464	End Cap 140
465	End Cap 160
466	End Cap 180
467	End Cap 200
468	Ferrule Tapping Tee
469	Ferrule tapping tee 63 x 1/2\\"
470	Ferrule tapping tee 63 x 3/4\\"
471	Ferrule tapping tee 63 x 1\\"
472	Ferrule tapping tee 75 x 1/2\\"
473	Ferrule tapping tee 75 x 3/4\\"
474	Ferrule tapping tee 75 x 1\\"
475	Ferrule tapping tee 90 x 1/2\\"
476	Ferrule tapping tee 90 x 3/4\\"
477	Ferrule tapping tee 90 x 1\\"
478	Ferrule tapping tee 90 x 1%\\"
479	Ferrule tapping tee 90 x 1^\\"
480	Ferrule tapping tee 90 x 2\\"
481	Ferrule tapping tee 110 x 1/2\\"
482	Ferrule tapping tee 110 x 3/4\\"
483	Ferrule tapping tee 110 x 1\\"
484	Ferrule tapping tee 110 x 1 %\\"
485	Ferrule tapping tee 100 x 1^\\"
486	Ferrule tapping tee 110 x 2\\"
487	Ferrule tapping tee 160 x 1/2\\"
488	Ferrule tapping tee 160 x 3/4\\"
489	Ferrule tapping tee 160 x 1 \\"
490	Ferrule tapping tee 160 x 1%\\"
491	Ferrule tapping tee 160 x 1^\\"
492	Ferrule tapping tee 160 x 2\\"
493	Ferrule tapping tee 200 x 1/2\\"
494	Ferrule tapping tee 200 x 3/4\\"
495	Ferrule tapping tee 200 x 1\\"
496	Ferrule tapping tee 200 x 1 %\\"
497	Ferrule tapping tee 200 x 1
498	Ferrule tapping tee 200 x 2\\"
499	Electrofusion Reducing Tee
500	Reducing Tee 32 x 32 x 20

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Pipe Line Project Tenders

Water Pipe Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Tender For For The Year 2026 2027 Under The Water Supply Department Of Satara City To Remove The Leakages Of The Distribution Pipe Of 15 Mm To 18 Inch Diameter To Regulate The Water Distribution System And To Do Other Ancillary Works, Satara-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Tender For For The Year 2026 2027 Under The Water Supply Department Of Satara City To Remove The Leakages Of The Distribution Pipe Of 15 Mm To 18 Inch Diameter To Regulate The Water Distribution System And To Do Other Ancillary Works, Satara-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us