|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 m wide for foundations, pipe line etc. and not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified & directed by Engineer-in-charge. |
| 3 | M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate for foundation filling, mass concrete and sub base of floors complete all as specified & directed by Engineer-in- charge. |
| 4 | Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge. |
| 5 | Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge. |
| 6 | M&L 75mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for 25mm th levelling course in Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified. |
| 8 | M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 Complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L rendering 10mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge. |
| 10 | M&L 15mm thick rendering on wall or concrete surface in cement mortar 1:4 finished even and fair. |
| 11 | M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed by Engineer-in-charge. |
| 12 | Material and labour for preparation of old/new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed. |
| 13 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and chamfered edges complete and including provn of 20mm thick screed bed or bedding layer in CM 1:4 etc complete all as specified . |
| 14 | M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 Kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 4.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed |
| 15 | Anodised aluminium powder coated ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking system, suitable handle (1 no.) complete all as specified and as directed by Engineer-in- charge. |
| 16 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws )complete all as specified and directed. |
| 18 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test will be provided by Contractor |
| 20 | 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 21 | S&F 150mm aluminium handles, cast type ,anodised and pattern/design as approved. |
| 22 | S&F for 150 mm size stainless steel barrel tower bolts of extruded section and fixed to shutter complete |
| 23 | Non - skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile n. exc. 0.11 Sqm but exc. 0.18 Sqm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match laid over a 15mm thick screed bed in CM 1:6. |
| 24 | M&L Glazed ceramic coloured tiles (600x300mm) x 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles laid over 10mm thick rendering in cement mortar 1:4. |
| 25 | M&L, PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, fitting and mass concrete |
| 26 | M&L chequered endura tiles 30cmx 30cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6 |
| 27 | Supply & fixing steel water tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed by Engineer-in-charge. |
| 28 | Supply & fixing steel water tubes of size 20mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed by Engineer-in-charge. |
| 29 | S & F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed to 20 mm bore GI Pipe complette all as specified and as directed. |
| 30 | S&F PVC connection 450mm long 15mm dia complete all as specified and as directed. |
| 31 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified. |
| 32 | Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified. |
| 33 | S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as directed. |
| 34 | S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified. |
| 35 | S&F in repairs CP Brass shower rose 125 mm size suitable for 15mm bore long pipe pipe complete all as specified. |
| 36 | S & F in repair cp health faucets with crutch or push handle, screwed down with 1.5mtr CP flexible pipe, screwed for pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as speciifed. |
| 37 | S & F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type, complete all as specified |
| 38 | S & Fixed in repair pvc mirror cabinet made of high intensity polythene of biggar size 500 x 400x120 mm complete all as specified |
| 39 | S&F in repair brass chromium plated toilet paper holder, complete all as specified. |
| 40 | S&F in repair brass chromium plated soap dish, complete all as specified. |
| 41 | S & F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed. |
| 42 | S&F in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified. |
| 43 | S & F in repairs 600mmx450mm bevelled edge looking mirror of selected quality glass,fency type with 100 mm border fixed to four Nos stainless steel brackets with stainless steel screws and cup washers. |
| 44 | S & F in repair for floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge. |
| 45 | Supply & fixing vitreous china wash basin, white, flat back of size 550mm x 400mm with Pedestal including 32mm dia PVC flush pipe with coupling and set of brackets incl PVC connections 15mm size with PTMT nuts of legth 450mm complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. |
| 47 | S&F Framed mild steel work as in doors or gates of angle or other sections with gusset plates, rails, braces, tank stagging etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A). including demolition of old PCC tank staging |
| 48 | S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 49 | M&L TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge. |
| 50 | All as per item No. 49 here-in-before but 5mm dia and over upto and including 10mm dia bars as in sturrups, nibs etc. |
| 51 | Form work to sides of concrete foundations,footing,raft and raft beams,sides and soffit (if any) of foundation and plinth beams: and similar works vertical, slab or to batter for rough finished surfaces of concrete . complete all as specified & directed |
| 52 | Form work to sides of pillars, column, posr, sruts, piers, stanchions with rough finished, square, concrete surfaces. |
| 53 | M&L M-35 design mix for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, footing complete all as specified and directed by Eng- in- charge |
| 54 | Supply and fixed class SN-8, dia of pipe 200mm & thickness of pipe as specified in IS 16098 (Part-2):2013, clause 6.3.1 table no 5structured wall polythelene piping system (pipe with online/offline coupler and elastomeric sealing ring) with non smooth external anular corrugated and smooth internal surface (double wall) for non pressure underground sewerage & drainage application polythylene piping fitted with help of coupler attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench, laying at prescribed gradient, depth and alignment, testing the water tightness of the joint, ensuring the continuity tests of the specified pipe segments etc including all necessary fittings (cost of fittings, rubber rings, gaskets etc includded) complete all as specified and directed by Engineer-in-charge. |
| 55 | M&L construction of BRICK MANHOLE1 0.6 x 0.75 x 0.8 (MH1) including RCC man hole cover including earthwork, PCC 1:4:8 for bedding, pcc 1:2:4 for benching, rendering and back filling complete all as specified and shown in drawing. |
| 56 | S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete. |
| 57 | S&F in PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls/floor 110mm mm dia ,in four storey building complete all as specified |
| 58 | Construction of 50 users Septic tank to carry sewage and sullage water, with RCC (1:1.5:3), B-1 Roof Slab all as per shown in Drng No. STD 1320 (C) Sheet 1/3 to 3/3 with following specification. Excavation in any type of soil, precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls , Base Slab , Baffle walls of RCC (1:1.5:3), Vent shaft , manhole openings with cover connection Complete. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings. |
| 59 | Construction of Soak well 1.80m dia and 3.0m effective depth as specified on STD 1173(C) sheet 1R/2 with following specification free board as per site requirement in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of precast cement concrete (20mm graded stone aggregate) block masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with Stone boulders of size, complete all as specified on STD 1173(C) sheet 1R/2.Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings. |
| 60 | M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. |
| 61 | M&L for 15-20mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified. |
| 62 | 1. M&L Supplying and laying of Precast U-Shape Strom water Drainhaving in to in dimension 450mm x 450mm of top thickness 50mm and bottom thickness of 70mm of 2000mm long each from T6 load carrying capacity-4.8Ton axel load and 2.4 T wheel load confirming to BIS/JIS having high performance self-compacting concrete M-40 cylindrical strength / M-50 Grade cube strength and Fe500/Fe550D reinforcement. The product should be manufactured in wet-cast method and dully steam cured for accelerated curing.The product shall have tie shape joint 10-20mm with 25mm depth groove as per BIS/JIS on both side of each storm water drain for jointing two precast storm water drains using cement mortar or suitable non shrink grout. The precast utility duct must consists of special in-built inlet at appropriate location for fixing de-shackle for mechanical installation, including supply transportation, installation of specific location at site in line, level, gradient and plumb with necessary testing commissioning etc complete all as specified and directed. |
| 63 | Providing and fixing factory made pre caste High strength precast draine covers with hole, having concrete of strength not less than M-40, size 500 x 550 x 70 (mm), are varied as for site requirement , reinforeced with as per structural requirement TMT Grade Fe 500/550D,all as specified as per direction of eng in charge. Note:- For item ser No 62 & 63 1. Contractor shall submit MoU with frecast/prefabircated manufracture to GE as specified and directed.2. Guarantee amount of Rs 15000.00 shall be provided against leakage/seepage of draine for 10 years.3. Including crane or hydra for laying drains 4. Sample as installed/laid at sena bhavan and displayed CWE. 5. Once the precast drains are on site (+,-)5% of Each lot will be subjected to rebound hammer test +compressive testing 6. Compressive test Certificate from Original OEM with inhouse NABL accredited lab only, to be submitted with each batch from Authenticity. MOU with Labs and 3rd Party Lab test certificate will not be accepted. 7. 10 Years warranty to be provided on Drains against leakage or seepage. |
| 64 | Demolition and breaking up old unserviceable salt glazed stoneware pipe 150mm bore at any depth set in cement morter incl PCC bed complete all as specified and directed. |
| 65 | Supply and fix class SN-8, dia of pipe 150mm & thickness of pipe as specified in IS 16098 (Part-2):2013, clause 6.3.1 table no 5 structured wall polythelene piping system (pipe with online/offline coupler and elastomeric sealing ring) with non smooth external anular corrugated and smooth internal surface (double wall) for non pressure underground sewerage & drainage application polythylene piping fitted with help of coupler attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench, laying at prescribed gradient, depth and alignment, testing the water tightness of the joint, ensuring the continuity tests of the specified pipe segments etc including all necessary fittings (cost of fittings, rubber rings, gaskets etc includded) complete all as specified and directed by Engineer-in-charge. |
| 66 | S&F Precast fiber reinforced cement concrete manhole cover medium duty of size 1000mm x 550mm x 80mm confoming to IS- 12592 including groove and hook arrangement for lifting and placing in position & sides covered by MS sheet complete all as specified and directed. |
| 67 | M&L for RCC Septic tank (size 5 mtr x 2 mtr) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-20 Nominal Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users including reinforcement and formwork complete all as specified and directed confirming to IS 2470 (Part 1) including hydraulic testing and commissioning. |
| 68 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-20 nominal mix/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia x 3.0 M effective depth including reinforcement and formwork complete all as specified and directed. |
| 69 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles. |
| 70 | M&L for 15 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on wall finished even and fair without using extra cement, with WPC complete all as specified. |
| 71 | Providing cement concrete, type B1 1:2:4 (20 mm graded stone aggregate) in copings, benching and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 72 | M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate)filling and mass concrete |
| 73 | M&L for machine pressed precast concrete interlocking paver block 60mm thick M-35 grade any shape and size with grey cement and pigment |
| 74 | M&L for sand filling under floor or in foundations including watering and consolidation |
| 75 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 76 | All as per item No 76 above but one light/fan point controlled by one switch. |
| 77 | All as per item No 76 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 78 | All as per item No 76 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 79 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 80 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 81 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified. |
| 82 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified. |
| 83 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 84 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 85 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire. |
| 86 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 87 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-30 protection), mechanical impact strength IK - 07, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 63/125 Amp as incomer and 20 to 32 Amp SP MCBs outgoing complete all as specifiedte :- MCCB & MCB will be measured & paid separately. |
| 88 | M&L in replacement MCCB 4 Pole, 63 Amps, 415 volts, 16 KA , 4P, optium 2.0 adjustable thermal setting Ics=100% Icu as per IEC 60947-II suitable for isolation , fixed over load and fixed short sircuit setting complete all as soecified & as directed |
| 89 | M&L MCB SP 6 to 32 Amp \\"B\\" curve all as specified and directed. |
| 90 | Supply and fix LED batten luminaire surface mounted 4 feet system wattage of 20 watts and System level efficacy of the Luminarie > 100 lumens/watts with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete. |
| 91 | S& F in replacement recessed mounting LED FLAT panel 2\\"x2\\" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 140-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 92 | Supply and fix 35/40 Watts High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100 lumens / watts with life time of 25000 burning hours, color temperature >5700 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 140-270V, THD<20%, High and low protection along with a surge protection of 2.5 KV including provision of suitable size of GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete Note : 25 mm dia light grade GI pipe 1.5 Mtrs, suitablw clamp , nuts, bolts & washers including the rate vof light fittings |
| 93 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , AC single phase 230/240 V including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 94 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete for AC . |
| 95 | Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 25.0 Sqmm 3.5 core laying in trenches, fixed along wall, through GI pipe under floor complete. |
| 96 | Supply and fix GI pipe 40 mm dia light grade , for laying in rod crossing /fixing of vertically complete all as directed. |
| 97 | Material & Labour of DWC ( double wall corrugated ) pipe of size 50 x63 mm dia ( innner & outer dia ) laying of XLPE cable all as specified & directed |
| 98 | Schedule of Credit Please Enable Macros to View BoQ information |
