|
| 1 | Fencing of transformer with erection complete |
| 2 | Plinth for T/F |
| 3 | Earthing of 400 KVA T/F |
| 4 | Cartage of 400 KVA T/F Store to site |
| 5 | 11 KV Fault Locator Machine With Van |
| 6 | Supply & Erection of LT Distribution box incomer 400 A type 3 as per approved Drawing by CC DMS (Bus Bar type) (Market Rate) NECESSA TECHNOLOGIES |
| 7 | Supply & Erection of Feeder Piller 3 Way Type-I ( For LT Distribution )one incomer of 315 A and one outgoing feeder with 315A and Three outgoing feeders each with 100 A each (Market Rate) NECESSA TECHNOLOGIES |
| 8 | Supply & Erection of 3-ph 415 V , Distribution Service Piller for LT. 100 Amp Incoming 4 nos 32 Amp, TPN 12 Nos 16 Amp SPN.Rating Feeder Type Distribution Service Piller suitable for Outdoor Installation. (Market Rate) NECESSA TECHNOLOGIES |
| 9 | Construction of concrete manhole chambers of size 1000mm x 1000mm with internal dimention 1900mm and 100mm wall thickness (Heavy Duty) with concrete cover of 100mm thickness (For making of straight through) and filling of ganga sand after work |
| 10 | Construction of chambers Brick of size 1000mm x 1000mm 100mm wall thickness (For making of straight through )and filling of ganga sand after work |
| 11 | 11 KV Cable Jointing Kit Outdoor 3x120sq. mm XLPE Cable. With erection |
| 12 | LT Strieght through With erection (Market Rate) NECESSA TECHNOLOGIES |
| 13 | Chemical Earthing |
| 14 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with rystalline conductive mixture (CCM) having anti corrosive & onductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to witch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 15 | Supplying & Laying of 25mmx3mm G.I. Strip from earth electrode in ground as required complete in all respects. |
| 16 | 11 KV CABLE AND TERMINATION |
| 17 | Supply and layingof 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 18 | 120sq. mm 3 core |
| 19 | Cables |
| 20 | Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Following size |
| 21 | size 10 sq mm x 4 core |
| 22 | size 16 sq mm x 4 core |
| 23 | size 120 sq mm x 3-1/2core |
| 24 | size 400 sq mm x 3-1/2core |
| 25 | Companey Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer -incharge.for cable |
| 26 | size 10 sq mm x 4 core |
| 27 | size 16 sq mm x 4 core |
| 28 | size 120 sq mm x 3-1/2core |
| 29 | size 400 sq mm x 3-1/2core |
| 30 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 31 | size 10 sq mm x 4 core |
| 32 | size 16 sq mm x 4 core |
| 33 | size 120 sq mm x 3-1/2core |
| 34 | size 400 sq mm x 3-1/2core |
| 35 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 36 | 160 mm dia |
| 37 | 120 mm dia |
| 38 | Supply and laying of PVC pipe Heavy Gauge 50 mm dia. Inc all necessaory Assesories for LT 1-ph & 3-ph Cosumers with laying & Restoration (market Rate) |
| 39 | Cable tie 16' |
| 40 | Kaju pin for PVC pipe Heavy Gauge 50 mm dia |
| 41 | Ladder type cable tray 300 mm width 75 mm color 2 mm thikness |
| 42 | MS Angel 75x75x6x2028mm for cable tray support(400mm support lenth) Please Enable Macros to View BoQ information |
