|
| 1 | Scrapping (a) White wash and colour wash |
| 2 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 3 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. |
| 4 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm. |
| 5 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect (b) Double rebate |
| 6 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect (a) Single rebate |
| 7 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code IS 2202-1(1999)).( a ) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-(iv) 35mm thick |
| 8 | Providing & Fixing glass panes withnails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm |
| 9 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machinescrews, complete in all respects. |
| 10 | Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) (a) 35 mm thick |
| 11 | Kail wood doors shutter windows shutter Paneled, glazed or glazed and paneled including hinges, screw chokes, cleats and cords etc. complete fixed in position (i) 35 mm thick |
| 12 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc |
| 13 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 14 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent, or dyed to required colour or shade with nuts and screws etc. complete ( a ) 300mm x 16mm |
| 15 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless andscrew etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm |
| 16 | Removing Doors and Windows (Steel or wood)with chowkhats by making recesses in wallswhen the wall is not to be dismantled.(a) Doors of area 3 sqm and below. |
| 17 | Removing Doors and Windows (Steel or wood)with chowkhats by making recesses in wallswhen the wall is not to be dismantled.( b ) Windows of area 3 sqm and below |
| 18 | 12.5 mm thick cement plaster 1:5 |
| 19 | SURFACEPVCCONDUITPIPEWIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and Call Bell), MS saddle clamp,PVC Circular junction Boxes (Four way 1½\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required (vi) Wiring 16/20Amp. power plug control point |
| 20 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-(iii)Overall size 2.5sq.mm (Un-sheathed) |
| 21 | SURFACEPVCCONDUITPIPEWIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and Call Bell), MS saddle clamp,PVC Circular junction Boxes (Four way 1½\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required (ii) Wiring light point |
| 22 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and Call Bell), MS saddle clamp,PVC Circular junction Boxes (Four way 1½\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required (v) Wiring 6 Amp. Plug control comprising wall socket point |
| 23 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and Call Bell), MS saddle clamp,PVC Circular junction Boxes (Four way 1½\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required (i)Wiring fan point (Without fan box) |
| 24 | Providing wall mounted fans of make Havells, fybros, crompton, usha or equivalent as per the satisfaction of Engineer-in-charge complete in all respect (rate as per Quotation-I) |
| 25 | Erection of fan:Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- (b Erection of Cabin fan on the wall |
| 26 | Providing LED Tube Light 20 Watt of make Havells, fybros, syska, Bajaj, crompton etc as per the satisfaction of the Engineer-in-charge complete in all respect (Rate as per quotation V attached) |
| 27 | Erection of light fixtures on wall/ ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture |
| 28 | Dismantling concrete d) Cement concrete plain1:2:4 mix |
| 29 | Earthwork in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around (b) Forsemi-conglomerate soil of the nature of pick jumper work. |
| 30 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.a)For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span |
| 31 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 32 | Cement concrete 1:2:4 a)With stone ballast or shingle i)mixing by manual means |
| 33 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 34 | Squarer rubble masonay uncoursed or buil to course in foundations and plinth in cements mortar 1:5 to be a patteren specified Please Enable Macros to View BoQ information |
